Professional Documents
Culture Documents
FACULTY OF ENGINEERING
AIMS To be able to design and size the components of a wastewater treatment plant and to appreciate the different ways of sludge disposal as well as re-use of treated effluent. OUTLINE SYLLABUS Wastewater Treatment Plant Design: Primary, Secondary and Tertiary treatment operations/processes Handling, treatment and disposal of wastewater sludge On-site sanitation systems Wastewater re-use and recycling MODULE MAP AND LEARNING OUTCOMES Having studied this module, the students should be able to: WEEK 1 WEEK 2 WEEK 3 WEEK 4 WEEK 5 WEEK 6 WEEK 7 WEEK 8 WEEK 9 WEEK 10 WEEK 11 WEEK 12 WEEK 13 WEEK 14 WEEK 15 Introduction to Wastewater Engineering and Components of a WWTP Design of Pumping Station Primary Treatment : Design of Screens, Grit Chambers Primary Treatment: Design of PST Secondary Treatment: Biological Processes Secondary Treatment: Activated Sludge Plants, ASP Secondary Treatment: ASP contd., Rotating Biological Contactors (RBC) CLASS ASSIGNMENT Sludge handling Sludge treatment and disposal Disinfection On-site sanitation systems: Septic tanks, absorption pit, leaching field, case studies Water re-use and recycling: CLASS REVISION CLASS REVISION
VENUE AND HOURS/ WEEK All lectures will normally be held on Saturdays from 11h15 to14h15 in Room: 1, Phase III Textile Engineering Bldg Hours/Week: THREE REFERENCES Lecture notes, handouts Metcalf & Eddy, Wastewater Engineering: Treatment, Disposal, Re-use, Published by McGraw Hill, 4th Edition, 2003 ASSESSMENT Class Test/Assignment Exams LECTURER
Jan 2012
: 30% : 70%
UNIVERSITY OF MAURITIUS
Department of Civil Engineering
FACULTY OF ENGINEERING
[09h00 16h00]
Jan 2012