Professional Documents
Culture Documents
Strnka . 1 z 3
Temperature Sensor
This describes the appearance and installation positions of the temperature sensors. The temperature sensors of the APM30 cabinet consist of the ambient temperature sensor, the air inlet temperature sensor, and the air outlet temperature sensor.
Background
The sensor in the power cabinet and the sensor in the transmission cabinet have the same dimensions and installation position. The temperature sensors are not hot-swappable.
Appearance
Figure 1 shows the appearance of the temperature sensor. Figure 1 Temperature sensor
The 5-pin straight socket on the temperature sensor is used to connect the temperature monitoring signal cable.
Installation Positions
Figure 2 shows the installation position of the ambient temperature sensor in the power cabinet. Figure 2 Installation position of the ambient temperature sensor
Temperature Sensor
Strnka . 2 z 3
NOTE: When the APM30 is used in the GSM system, the name of the temperature sensor here is ambient temperature sensor; when the APM30 is used in the WCDMA system, the name is NCMU temperature sensor. Figure 3 shows the installation position of the air inlet temperature sensor in the power cabinet. Figure 3 Installation position of the air inlet temperature sensor
Figure 4 shows the installation position of the air outlet temperature sensor in the power cabinet. Figure 4 Installation position of the air outlet temperature sensor
Temperature Sensor
Strnka . 3 z 3