Professional Documents
Culture Documents
How To Connect An Hid Proxpro Reader To A Pac Door Controller
How To Connect An Hid Proxpro Reader To A Pac Door Controller
1. Introduction
This document accompanies 5355A HID ProxPro Reader Installation Manual published by the HID Corporation and describes how to interface the HID ProxPro Reader to a PAC 2200 Door Controller or Administration PC.
Figure 1 Connecting a Door Controller Refer to the following documents for more information on PAC equipment: 17018 PAC PIN Interface Installation Instructions 17132 PAC Wiegand Interface Installation Instructions 17263 PAC 2200 Series Controllers Installation Guide
PAC INTERNATIONAL LTD, 1 Park Gate Close, Bredbury, Stockport, SK6 2SZ, England Tel: +44 (0) 161 406 3400. Fax: +44 (0) 161 430 8658 www.pac.co.uk
Connecting an Administration PC
3. Connecting an Administration PC
Figure 2 shows the connections required to connect an administration PC to the reader. A Wiegand Interface Unit and a PC Interface Unit are required.
Figure 2 Connecting an Administration PC Refer to the following document for more information on PAC equipment: 17056 PC Interface Kit with Wiegand Interface Installation Instructions