Professional Documents
Culture Documents
Center Distance Cone Distance Gear ratio z2/z1 Number of teeth module normal module Face width Pressure angle Helix angle Height Factor Radial clearance, c = 0.25 m for standard gears. Correction factor or Addendum modification coefficient for So & S corrected gears b/a b/m R/b
mm mm
mm mm mm deg deg
Sl. No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Description
Normal module No. of Teeth Normal Pressure Angle Normal Pressure Angle in Radians Tangent Invoute Reference diameter Pinion Working Pitch Circle Diameter Cosine d1*Cosine Cosine ' Working Pressure Angle Working Pressure Angle in Degree Working Pitch Diameter for Gear Center distance of 'So' pair Center distance of the modified gear Pair Tangent ' Involute ' Involute ' - Involute (Involute ' - Involute )/2tangent
Symbol
mn z1- for Pinion z2 - for Gear in Rad Tan d1 - For Pinion & d2 - For Gear d1' COS d1*Cos d1'/(d1*Cos) ' ' d2' a a' Tan ' Inv ' Involute ' - Involute (Inv' - Inv)/2Tan
21 22 23 24 25 26 27 28 29 30 31
Sum of the Total number of tooth Sum of the Addendum modification Co - Efficients Addendum modification Coefficient For the pinion Addendum modification Coefficient for the Gear Difference in the Center Distance Deddenum of the Pinion and Gear Total Tooth Depth Change in Tooth depth Addendum Tip diameter Root diameter
z1+z2 x1+x2 x1 x2 Da hf1 - Deddendum of Pinion hf2 - Deddendum of Gera h Dh ha1 - for pinion; ha2 - for gear da1 - for pinion; da2 - for Gear df1 - for pinion; df2 - for gear
0 #DIV/0! -0.5702 #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0! #DIV/0! #DIV/0! 0 #DIV/0! #DIV/0! #DIV/0! #DIV/0!