Professional Documents
Culture Documents
MML by Zoli
MML by Zoli
INTERROGATING SITE STATUS AND INFO:................................................................................2 BLOCK/UNBLOCK A SITE (BCF):.....................................................................................................2 BLOCK/UNBLOCK A SECTOR (BTS) OF A SITE (BCF) WITHOUT FORCED HANDOVER (FHO):.......................................................................................................................................................2 BLOCK/UNBLOCK A SECTOR (BTS) OF A SITE (BCF) WITH FORCED HANDOVER (FHO):.......................................................................................................................................................2 BLOCK/UNBLOCK A TRX OF A SITE WITH FHO:.......................................................................2 BLOCK/UNBLOCK A TRX OF A SITE WITHOUT FHO:..............................................................3 BASE BAND HOPPING FOR ALL SECTORS ON A SITE WITHOUT FORCED HANDOVER:...........................................................................................................................................3 BASE BAND HOPPING FOR ALL SECTORS ON A SITE WITH FORCED HANDOVER:......3 TRX SPECIFIC MML COMMANDS:.................................................................................................4 BTS SPECIFIC MML COMMANDS:..................................................................................................5 BCF SPECIFIC MML COMMANDS:..................................................................................................6 BSC SPECIFIC MML COMMANDS: .................................................................................................7 MSC SPECIFIC MML COMMANDS: ................................................................................................8
Made by ZOLI 7
Base band hopping for all sectors on a site without Forced Handover:
1. Check site in remedy for: BCF number, parent element (BSC) 2. Open MML session to BSC 3. Check site for status and BTS numbers: ZEEI:BCF=xx; xx--> BCF number 4. Set BCF state to LOCKED: ZEFS:xx:L; xx --> BCF number; 5. Set sector state to LOCKED: ZEQS:BTS=xx:L; xx--> BTS number 6. Change Hopping status: ZEQE:BTS=xx:HOP=BB; (for BB activation) ZEQE:BTS=xx:HOP=N; (for BB deactivation) xx--> BTS number 7. Set sector state to UNLOCKED: ZEQS:BTS=xx:U; xx--> BTS number 8. Check site for status: ZEEI:BCF=xx; xx--> BCF number 9. Repeat steps 5 to 8 for all sectors 10. Set BCF state to UNLOCKED: ZEFS:xx:U; xx --> BCF number; 11. Check site for status: ZEEI:BCF=xx; xx--> BCF number
Base band hopping for all sectors on a site with Forced Handover:
1. Check site in remedy for: BCF number, parent element (BSC) 2. Open MML session to BSC
3. Check site for status and BTS numbers: ZEEI:BCF=xx; xx--> BCF number 4. Set sector state to LOCKED: ZEQS:BTS=xx:L:FHO,time; xx--> BTS number time --> Time for forced handover in seconds 5. Check site for status: ZEEI:BCF=xx; xx--> BCF number 6. repeat step 4 and 5 for all sectors 7. Set BCF state to LOCKED: ZEFS:xx:L; xx --> BCF number; 8. Change Hopping status: ZEQE:BTS=xx:HOP=BB; (for BB activation) ZEQE:BTS=xx:HOP=N; (for BB deactivation) xx--> BTS number 9. Set sector state to UNLOCKED: ZEQS:BTS=xx:U; xx--> BTS number 10. Check site for status: ZEEI:BCF=xx; xx--> BCF number 11. Repeat steps 7 to 10 for all sectors 12. Set BCF state to UNLOCKED: ZEFS:xx:U; xx --> BCF number; 13. Check site for status: ZEEI:BCF=xx; xx--> BCF number
3. ZDTI:NAME=xxxxx; xxx= T+BCF Nr+sectorNr+TRXnr; This interrogation displays a LAPD link(Signaling Link) and shows whether or not the LAPD is in working order or not. Example: ZDTI:NAME=T8611; BCF Nr. = 86; The first sector of the BCF and the first trx on sector. 4. ZDTI:::PCM=xx; This shows all LAPD links attached to this specific PCM (ET). 5. ZDTC:xxxxx:AD; xxxxx= T+BCF Nr+sectorNr+TRXnr; This command sets signaling activation attribute to Denied on the specified TRX. 6. ZDTC:xxxxx:AL; xxxxx= T+BCF Nr+sectorNr+TRXnr; This command sets signaling activation attribute to Allowed on the specified TRX. 7. ZDTC:xxxxx:BL; xxxxx= T+BCF Nr+sectorNr+TRXnr; This command blocks the signaling on the specified TRX. 8. ZDTC:xxxxx:WO; xxxxx= T+BCF Nr+sectorNr+TRXnr; This command activates the signaling on the specified TRX.
Set sector state to LOCKED: xx--> BTS number time --> Time for forced handover in seconds ZEQS:BTS=xx:U; Set sector state to UNLOCKED: xx--> BTS number 3. ZEQV:BTS=xx:GENA=Y; This command toggles GPRS within the cell. Replace the Y with an N to disable GPRS. 4. ZERO:BTS=xx; This command displays the traffic channels in use on all TRXs within the cell. You can see if there are calls taking place on all of the TRX traffic channels 5. ZEEI:BTS=xx; This will show the information pertaining to the BTS and the TRXs connected to it. You will be able to see if it and the TRXs are in a working state. This will also show you which TRX has the BCCH on it.
4. ZEEI:BCF=xx; This command shows site information such as the BTS's and TRX's connected to the specified BCF. 5. ZEOL:xx; xx= BCF number. This command shows the current alarms for the BCF in question.
6. ZAHP; This command shows all the alarms from midnight of the current day. It is also modified to investigate alarms from a previous date. For example: ZAHP:::2009-12-01,04-00-00; You can also refine the search to a specific unit. 7. ZDCD; This command shows you the current date and time on the BSC.
This command will print out the circuits in the MSC that are in a state other than working.