Professional Documents
Culture Documents
>>>
www.klinkmann.com
NEW
For highly frequented areas, requiring important mechanical resistance and/or washing down Conform to standard EN 60-670 and EN 50 085-2-2
Pack Cat.Nos
Junction or connection point for concrete floor according to type of cover associated For junction of LV and ELV cabling and/or installation of floor boxes Height adjustable from 105 mm to 140 mm using 4 inserts located in the box corners and a tool adapting to electric drill or screwdriver Bendable side walls for assembling with different sizes of floor ducts Supplied with worksite protection cover to be replaced by blanking cover plate or mounting cover plate Allowing floor covering infill between 6 and 24 mm 896 34 Universal metal in-screed backbox
896 83 Normal load support Up to 8 KN load with deflection < 6 mm 896 84 Heavy load support Up to 20 KN load with deflection < 3 mm 896 39 Set of 2 conduit adaptors for metal cavity floor box Cat.No 896 34
Perfect solution for shopping centres, car showrooms, exhibition halls, airports Heavy load support: 8 and 20 KN load resistance 3 types of cover: - IP 66 plain cover for all types of floors - IP 66 for marble and tiled floors - IP 30 for wooden floors
896 85
896 86
896 87 896 88
These products are part of solutions for office equipment > See p. 772-773
Red catalogue numbers: New products
774
www.klinkmann.com
896 44
896 05
896 26
896 49
Conform to standard EN 60-670 and EN 50085-2-2 (p. 777) Workstation connection for raised floor or concrete floor, using plastic or metal backbox (p. 776) Supplied with reversible stainless steel cover or cover for carpet For technical space 75 mm Mounting boxes (for horizontal wiring device positioning): - height adjustable from 75 to 105 mm - ensure perfect cable separation - takes 2 flexible conduits 20 mm - shifted from one another for optimal connection for all sockets - take marking labels Easy opening cover with rings and holding in open position during connection
Pack Cat.Nos
Pack
Cat.Nos
1 1 1
1 1 1
16 modules For installing 8 x 2 modules Mosaic 896 25 With stainless steel cover, grey RAL 7031 896 26 With cover for carpet, grey RAL 7031 896 27 With cover for carpet, beige RAL 1019
Access units
Access units for raised or concrete oor (minimum height 90 mm) Supplied with stainless steel cover or cover for carpet Grey RAL 7031 Small dimensions With cover for carpet With stainless steel cover Large dimensions With cover for carpet With stainless steel cover
1 1 1
1 1 1 1
1 1 1
1 1
1 1 1
These products are part of solutions for office equipment > See p. 772-773
775
www.klinkmann.com
896 60
896 61
896 69 896 34
896 74
896 34
5 5
16 12 14 6 12 16 10 8
896 60(1) 896 61(1) 896 62(1) 896 63(1) 896 67(1) 896 68(1) 896 69(1) 896 70(1)
5 5
5 5 5 5 5
1 1
776
www.klinkmann.com
On floor 5J - 25 C - 5 C + 60 C Non propagating Without continuity Without electrical insulating characteristic IP20 With a tool Dry floor treatment 750 N
Heavy duty floor system 5J - 25 C - 5 C + 60 C Non propagating Without continuity Without electrical insulating characteristic IP66(A) IP30(B) With a tool Wet floor treatment 3000 N
Resistance to impact for installation and application Minimum storage and transport temperature Minimum installation and application temperature Maximum application temperature Resistance to flame propagation Electrical continuity characteristics Electrical insulating characteristics Degree of protection provided by enclosure System access cover retention Floor treatment Resistance to a vertical load applied over a small surface area Optional classification according to resistance to a vertical load applied over a large surface area
5J - 25 C - 5 C + 60 C Non propagating Without continuity Without electrical insulating characteristic IP30 With a tool Dry floor treatment 750 N
Dimensions
450
6.102
6.103 480
56 140
3000 N
3000 N
15000 N
see (1)
see (2)
see (1)
see (2)
200 38 28
250 38 28
300 38
896 63 896 70 896 63 896 70 896 61 896 68 896 62 896 69 896 63 896 70 + + + + 896 60 896 67 896 61 896 68 896 74 896 75 896 76 896 77 896 78
18-48
65
18-48
777
www.klinkmann.com
floor units
surface or flush-mounting
grommet
flush-mounting
317 48
893 07
Pack
Cat.Nos
6503 00
6503 49
Body - cast aluminium Main jaw - injection mouled plastic Nylon 66 Inner jaws - closed cell Neoprene Recommended hole cut-out size: 127 mm diameter Will fit floor tile thickness range of 25 to 55 mm Can form the base of a cable management products such as power posts and poles Standard depth: 60 mm 893 07 Access grommet IP 20 - IK 08
5 5 10
Empty electrical wiring accessories to be equipped with Mosaic screw connection sockets (p. 798) Equipped with pivoting wiring supports for easy installation of sockets Can be combined with floor duct Cat.No 328 00 Can be illuminated with LED Cat.No 899 06 317 48 2 x 4 modules 317 49 3 x 4 modules 899 06 LED to be wired, 230 V High luminescence orange neon
Empty receptacles for floor sockets 6503 00 3 modules - Aluminium 6503 50 3 modules - Brass 6503 49 2 x 3 modules - Aluminium Flush-mounting boxes for floor sockets 6503 90 3 modules - Plastic 6503 31 2 x 3 modules For floor box Cat.No 6503 49 - Plastic 6503 32 3 modules (can be assembled with another Cat.No 6053 32 to compose a 2 x 3 modules box) Metallic
These products are part of solutions for office equipment > See p. 772-773
778
www.klinkmann.com
300 92
300 93
328 00
Conform to standard EN 50085-2-2 For creating a link between trunking, column, mini-column, floor units or protecting cables on passageways Supplied with cover
Pack Cat.Nos
Pack
Cat.Nos
54
10 10 4
Trunking 300 92(1) Length 2 m, supplied with cover 3 compartments Capacity 1: max. 9 mm Capacity 2: max. 6 mm IP 40 - IK 07 RAL 7030 Accessories 300 12 Cover joint 300 11 300 13 Flat angle Junction box
20
328 00(1)
50 1
10 10 5
1
2 18
10 10 4
Trunking 300 93(1) Length 2 m, supplied with cover 3 compartments Capacity 1: max. 14 mm Capacity 2: max. 11 mm IP 40 - IK 07 RAL 7030 Accessories 300 19 Cover joint 300 18 300 13 Flat angle Junction box
328 01
75 1
To be used with Cat.No 328 00 107 71 + 106 90 For cover 65 mm 107 72 + 106 90 For cover 85 mm
These products are part of solutions for office equipment > See p. 772-773
(1) Number of metres in pack
779
NEW
www.klinkmann.com
6535 50
535 90
6535 51
535 91
6535 53
535 99
535 97
Aluminium extensions with reversible cable guide for grouping cords of connected devices High current connection on terminal blocks with cable grip For low current sockets, connection on RJ 45 sockets or area distribution box with specific cord RJ 45/stripped Cat.Nos 517 96/97/98 (see p. 879) 2P+E sockets with 45 sloping screw recesses for easy insertion of angled plug 16 A - 250 VA - with shutters 3680 W at 230 VA per circuit Supplied without cord Conform to IEC 60-884-1
Pack Cat.Nos
Pack
Cat.Nos
1 1 1
Aluminium extensions with cable guide (reversible) To be equipped with Mosaic sockets 535 90 8 modules 535 91 12 modules 535 92 16 modules
Accessories
5
1 1
6535 50 - 6 x 2P+E sockets - 1 illuminated switch 6535 51 - 2 x 2P+E sockets - 2 x 2P+E tamperproof sockets
Fixing accessory 535 99 Fixing accessory to clip on desktop Cable worm Very suitable solution for a safe and design protection of the cabling between desk and floor 535 97 2 compartments Length: 770 mm 70 mm Translucid
6535 52 - 4 x 2P+E sockets - 3 x RJ 45 sockets Cat. 6 UTP 1 module 6535 53 - 2 x 2P+E sockets - 2 x 2P+E tamperproof sockets - 2 x RJ 45 sockets Cat. 6 UTP - 2 blanking plates 1 module for VDI
These products are part of solutions for office equipment > See p. 772-773
Red catalogue numbers: New products
780