Professional Documents
Culture Documents
2
Date: 28th July, 2012 Submission Date: 13thAugust, 2012
Section -2
1. Design lossless coupling network that matches a load of (100+j25) to a 50 n source impedance at 20 MHz. 2. A Parallel tuned circuit is resonant at a frequency of 1 MHz and has a Q factor of 50. The tuning capacitor is 200pF. Calculate the Bandwidth, and find the values of the components used. 3. A circuit consisting of resistance of 4 and an inductor of 0.5 H and variable capacitor all in series connected across 100 V, 50 Hz supply at resonance, calculate : C, VL, Q, Io, at 100 Hz. 4. Design a lossless coupling network that matches a 10 + j5 load to a 50 source impedance. 5. Design a series RLC filter to couple a voltage source, with negliglible source impedance, to a 50 load resistance. The specifications of the filter are that the filter center frequency be 5 MJz and the bandwidth be 100 KHz. 6. What must be the minimum circuit Q for the amplitude of the fifth harmonic to be 40dB below the amplitude of the fundamental frequency? 7. Find the loaded Quality factor QL of a parallel tuned circuit with a inductor having a Qu of 100 and load resistor of 100K. 8. A tightly coupled transformer with a primary inductance of L1 of 25 H and a secondary inductance L2 of 400 H is used in the circuit shown in figure below. What is the overall frequency response of the circuit?
(c )
(d)
(e)
(f)