Professional Documents
Culture Documents
Ultrahigh-Purity Stainless Steel Tubular Fittings: Metric Sizes
Ultrahigh-Purity Stainless Steel Tubular Fittings: Metric Sizes
com
Ultrahigh-Purity Stainless S t e e l Tu b u l a r F i t t i n g s
Metric Sizes
I Sizes from 6 through 18 mm OD I Imperial sizes available upon request I 316L stainless steel construction I Available in a variety of configurations, including coaxial I Marked to indicate material type and heat code
Features
I Traceability
Each tubular fitting is marked to identify manufacturer, material type, and heat code.
I Variety of configurations
Tubular fittings are available in elbows, tees, reducers, end caps, and coaxial configurations.
Technical Data
Product ID Finish 0.25 m (10 in.) Ra max except for cold formed and welded areas; electropolished. Packaging Ends are faced and protected with polyamide nylon film and polyethylene caps; packed in double polyethylene bags. Individual Certification Material Specification 316L in accordance with W.-NR 1.4435 Wall Thickness 1 mm (6 to 12 mm OD) 1.5 mm (18 mm OD) External Finish
UltrahighPurity
Buffed/ brushed
NOTE: Process specifications apply to process tube in coaxial tubular fittings. Process specifications are available upon request. Contact your local independent Swagelok sales and service representative.
Raw Materials
Swagelok UHP tubular fittings are manufactured from 316L stainless steel; controlled sulfur levels of 0.005 to 0.010 % promote reliable, consistent orbital welding.
Markings
UHP tubular fittings are marked with material type and heat code, using a mechanical etching tool.
Pressure Ratings
See Swagelok Tubing Data for pressure ratings.
45 Elbow
A
Concentric Reducer
T B
A Tx C
Tube OD mm 6 8 10 12 18
T Tube OD mm 12
25.0 (0.98)
18
Tx Tube OD mm 6 8 6 8 12
Dimensions, mm (in.) A B C
75.0
(2.95)
30.0
(1.18)
35.0
(1.38)
Tee
B
Reducing Tee
B
Tx
T A B
Tube OD mm 6 8 10 12 18
Dimensions, mm (in.) A 70.0 (2.76) 108 (4.25) 110 (4.33) 112 (4.41) 118 (4.65) B 35.0 (1.38) 54.0 (2.13) 55.0 (2.17) 56.0 (2.20) 59.0 (2.32)
T Tube OD mm 8 10
12
18
Tx Tube OD mm 6 6 8 6 8 10 6 8 10 12
Ordering Number 6L-T8M-3-6S-EP10 6L-T10M-3-6S-EP10 6L-T10M-3-8S-EP10 6L-T12M-3-6S-EP10 6L-T12M-3-8S-EP10 6L-T12M-3-10S-EP10 6L-T18M-3-6S-EP10 6L-T18M-3-8S-EP10 6L-T18M-3-10S-EP10 6L-T18M-3-12S-EP10
Dimensions, mm (in.) A 108 (4.25) 110 (4.33) B 54.0 (2.13) 55.0 (2.17)
112 (4.41)
56.0 (2.20)
118 (4.65)
59.0 (2.32)
End Cap
A
90 Elbow
B A B A
Tube OD mm 6 8 10 12 18
Dimensions, mm (in.) A
35.0 (1.38)
40.0 (1.57)
Tube OD mm 6 8 10 12 18
Dimensions, mm (in.) A 103 (4.06) 105 (4.13) 51.0 (2.01) B 80.0 (3.15)
25.0 (0.98)
Coaxial 90 Elbows
Process Tube OD mm 6 8 12
Containment Tube OD mm 10 12 18
Dimensions, mm (in.)
A
A B
Coaxial Tees
Dimensions, mm (in.) A 55.0 (2.17) 56.0 (2.20) 59.0 (2.32) B 88 (3.46) 89 (3.50) 92 (3.62)
A B
A B
Process Tube OD mm 6 8 12
Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user.
SwagelokTM Swagelok Company 2003 Swagelok Company Printed in U.S.A., GLL January 2003, R0 MS-02-180