Professional Documents
Culture Documents
STATIC DIMENSIONS – Standard height arm STATIC DIMENSIONS – High lift arm
G G
J F J F
E E
H1 B C D H1 B C D
H A H A
STATIC DIMENSIONS – Standard height arm STATIC DIMENSIONS – High lift arm
mm (ft-in) mm (ft-in)
A Overall length 7960 (26-1) A Overall length 8520 (27-11)
B Axle to pivot pin 1622 (5-4) B Axle to pivot pin 2182 (7-2)
C Wheel base 3300 (10-10) C Wheel base 3300 (10-10)
D Axle to counterweight face 1970 (6-5) D Axle to counterweight face 1988 (6-6)
E Minimum ground clearance 470 (1-7) E Minimum ground clearance 470 (1-7)
F Height over exhaust 3260 (10-8) F Height over exhaust 3260 (10-8)
G Width over cab 1400 (4-9) G Width over cab 1400 (4-9)
H Width over tyres 2702 (8-10) H Width over tyres 2702 (8-10)
H1 Wheel track 2100 (6-10) H1 Wheel track 2100 (6-10)
J Height over cab 3370 (11-1) J Height over cab 3370 (11-1)
Pin height (maximum) 4107 (13-5) Pin height (maximum) 4677 (15-4)
Overall operating height 5571 (18-3) Overall operating height 6140 (20-2)
Front axle weight kg (lb) 8840 (19487) Front axle weight kg (lb) 9720 (21429)
Rear axle weight kg (lb) 10030 (22112) Rear axle weight kg (lb) 9561 (21078)
Total weight kg (lb) 18870 (41600) Total weight kg (lb) 19281 (42507)
Inside radius 3182 (10-5) Inside radius 3182 (10-5)
Maximum radius 6554 (21-6) Maximum radius 6770 (22-2) A Product
of Hard Work
Articulation angle ± 40° Articulation angle ± 40°
JCB WHEELED LOADING SHOVEL | 456 ZX
LOADER DIMENSIONS – Standard height arm CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS – Standard height arm
Bucket mounting Direct Direct Direct Direct Direct Direct Direct Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch
Bucket type General Purpose General Purpose Penetration General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose
Bucket equipment Tipped teeth Tipped teeth Tipped teeth Reversible toeplate Reversible toeplate Tipped teeth & Tipped teeth & Tipped teeth Tipped teeth Reversible toeplate Reversible toeplate Tipped teeth & Tipped teeth &
toeplate segments toeplate segments toeplate segments toeplate segments
Bucket capacity (SAE heaped) m3 (yd3) 3.1 (4.1) 3.3 (4.3) 3.1 (4.1) 3.3 (4.3) 3.5 (4.6) 3.3 (4.3) 3.5 (4.6) 3.1 (4.1) 3.3 (4.3) 3.3 (4.3) 3.5 (4.6) 3.3 (4.3) 3.5 (4.6)
Bucket capacity (struck) m3 (yd3) 2.791 (3.651) 2.991 (3.912) 2.791 (3.651) 2.933 (3.836) 3.137 (4.103) 2.933 (3.836) 3.137 (4.103) 2.497 (3.266) 2.687 (3.515) 2.648 (3.464) 2.844 (3.720) 2.648 (3.464) 2.844 (3.720)
Bucket width mm (ft-in) 2837 (9-4) 2837 (9-4) 2811 (9-3) 2800 (9-2) 2800 (9-2) 2800 (9-2) 2800 (9-2) 2837 (9-4) 2837 (9-4) 2837 (9-4) 2837 (9-4) 2837 (9-4) 2837 (9-4)
Bucket weight with wearparts kg (lb) 1602 (3532) 1645 (3627) 1612 (3554) 1722 (3797) 1765 (3892) 1722 (3797) 1765 (3892) 1380 (3043) 1416 (3122) 1495 (3296) 1531 (3376) 1495 (3296) 1531 (3376)
Maximum material density kg/m3 (lb/yd3) 2064 (3411) 1925 (3257) 2061 (3436) 1920 (3249) 1797 (3014) 1920 (3249) 1797 (3014) 1874 (3125) 1748 (2957) 1743 (2950) 1631 (2737) 1743 (2950) 1631 (2737)
Tipping load straight kg (lb) 15340 (33826) 15235 (33594) 15318 (33776) 15211 (33541) 15106 (33308) 15211 (33541) 15106 (33308) 13975 (30815) 13880 (33557) 13857 (30556) 13762 (30346) 13857 (30556) 13762 (30346)
Tipping load full turn kg (lb) 12797 (28218) 12703 (28011) 12776 (28172) 12672 (27943) 12577 (27732) 12672 (27943) 12577 (27732) 11620 (25621) 11534 (25433) 11506 (25371) 11419 (25179) 11506 (25371) 11419 (25179)
Payload at 50% FTTL kg (lb) 6399 (14109) 6352 (14005) 6388 (14086) 6336 (13971) 6288 (13866) 6336 (13971) 6288 (13886) 5810 (12811) 5767 (12716) 5753 (12686) 5710 (12590) 5753 (12686) 5710 (12590)
Maximum break out force kN (lbf) 172 (38666) 165 (37092) 172 (38666) 161 (36193) 154 (34619) 161 (36193) 154 (34619) 153 (34394) 147 (33046) 143 (32146) 137 (30798) 143 (32146) 137 (30798)
M Dump angle maximum degrees 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
N Roll back angle at full height degrees 67° 67° 67° 67° 67° 67° 67° 67° 67° 67° 67° 67° 67°
O Roll back at carry degrees 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
P Roll back at ground level degrees 39° 39° 39° 39° 39° 39° 39° 39° 39° 39° 39° 39° 39°
Q Load over height mm (ft-in) 3822 (12-6) 3822 (12-6) 3856 (12-3) 3831 (12-6) 3831 (12-6) 3822 (12-6) 3822 (12-6) 3822 (12-6) 3702 (12-2) 3831 (12-6) 3711 (12-2) 3822 (12-6) 3702 (12-2)
R Dump height (45° dump) mm (ft-in) 2760 (9-0) 2718 (8-11) 2784 (9-1) 2887 (9-6) 2845 (9-4) 2760 (9-0) 2718 (8-11) 2640 (8-8) 2578 (8-6) 2767 (9-1) 2725 (8-11) 2640 (8-8) 2578 (8-6)
S Dig depth mm (ft-in) 56 (0-2) 56 (0-2) 56 (0-2) 91 (0-4) 91 (0-4) 91 (0-4) 91 (0-4) 56 (0-2) 56 (0-2) 91 (0-4) 91 (0-4) 91 (0-4) 91 (0-4)
T Reach at dump height mm (ft-in) 1187 (3-10) 1141 (3-9) 1213 (4-0) 1085 (3-7) 1039 (3-5) 1187 (3-10) 1141 (3-9) 1307 (4-3) 1261 (4-2) 1205 (3-11) 1159 (3-10) 1307 (4-3) 1261 (4-2)
Reach maximum (45° dump) mm (ft-in) 2146 (7-0) 2188 (7-2) 2170 (7-1) 2032 (6-8) 2074 (6-10) 2146 (7-0) 2188 (7-2) 2266 (7-5) 2308 (7-7) 2152 (7-1) 2194 (7-2) 2266 (7-5) 2308 (7-7)
A Product
Operating weight (includes 80kg operator and full fuel tank) kg (lb) 18823 (41497) 18872 (41605) 18833 (41519) 18943 (41762) 18992 (41870) 18943 (41762) 18992 (41870) 19147 (42211) 19196 (42320) 19267 (42476) 19316 (42584) 19267 (42476) 19316 (42584) of Hard Work
JCB WHEELED LOADING SHOVEL | 456 ZX
LOADER DIMENSIONS – High lift arm CHANGES TO OPERATING PERFORMANCE AND DIMENSIONS – High lift arm
Bucket mounting Direct Direct Direct Direct Direct Direct Direct Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch Quickhitch
Bucket type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose
Bucket equipment Tipped teeth Tipped teeth Tipped teeth Reversible toeplate Reversible toeplate Tipped teeth & Tipped teeth & Tipped teeth Tipped teeth Reversible toeplate Reversible toeplate Tipped teeth & Tipped teeth &
toeplate segments toeplate segments toeplate segments toeplate segments
Bucket capacity (SAE heaped) m3 (yd3) 2.8 (3.7) 3.1 (4.1) 3.3 (4.3) 3.3 (4.3) 3.5 (4.6) 3.3 (4.3) 3.5 (4.6) 3.1 (4.1) 3.3 (4.3) 3.3 (4.3) 3.5 (4.6) 3.3 (4.3) 3.5 (4.6)
Bucket capacity (struck) m3 (yd3) 2.497 (3.266) 2.791 (3.651) 2.991 (3.912) 2.933 (3.836) 3.137 (4.103) 2.933 (3.836) 3.137 (4.103) 2.497 (3.266) 2.687 (3.515) 2.648 (3.464) 2.844 (3.720) 2.648 (3.464) 2.844 (3.720)
Bucket width mm (ft-in) 2837 (9-4) 2837 (9-4) 2837 (9-4) 2800 (9-2) 2800 (9-2) 2800 (9-2) 2800 (9-2) 2837 (9-4) 2837 (9-4) 2837 (9-4) 2837 (9-4) 2837 (9-4) 2837 (9-4)
Bucket weight with wearparts kg (lb) 1529 (3371) 1602 (3532) 1645 (3627) 1722 (3797) 1765 (3892) 1722 (3797) 1765 (3892) 1380 (3043) 1416 (3122) 1495 (3296) 1531 (3376) 1495 (3296) 1531 (3376)
Maximum material density kg/m3 (lb/yd3) 1713 (2858) 1540 (2567) 1436 (2430) 1432 (2424) 1340 (2249) 1432 (2424) 1340 (2249) 1410 (2351) 1315 (2226) 1312 (2220) 1228 (2060) 1312 (2220) 1228 (2060)
Tipping load straight kg (lb) 11593 (25563) 11536 (25437) 11456 (25262) 11438 (25222) 11360 (25049) 11438 (25222) 11360 (25049) 10613 (23401) 10540 (23239) 10524 (23204) 10452 (23045) 10524 (23204) 10452 (23045)
Tipping load full turn kg (lb) 9593 (21152) 9546 (21049) 9476 (20896) 9453 (20844) 9382 (20687) 9453 (20844) 9382 (20687) 8744 (19280) 8680 (19140) 8659 (19094) 8594 (18951) 8659 (19094) 8594 (18951)
Payload at 50% FTTL kg (lb) 4797 (10576) 4773 (10525) 4738 (10448) 4727 (10422) 4691 (10343) 4727 (10422) 4691 (10343) 4372 (9640) 4340 (9570) 4330 (9547) 4297 (9475) 4330 (9547) 4297 (9475)
Maximum break out force kN (lbf) 164 (36867) 151 (33945) 145 (32596) 142 (31922) 136 (30573) 142 (31922) 136 (30573) 134 (30123) 129 (28999) 126 (28325) 121 (27201) 126 (28325) 121 (27201)
M Dump angle maximum degrees 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
N Roll back angle at full height degrees 53° 53° 53° 53° 53° 53° 53° 53° 53° 53° 53° 53° 53°
O Roll back at carry degrees 52° 52° 52° 52° 52° 52° 52° 52° 52° 52° 52° 52° 52°
P Roll back at ground level degrees 44° 44° 44° 44° 44° 44° 44° 44° 44° 44° 44° 44° 44°
Q Load over height mm (ft-in) 4393 (14-5) 4393 (14-5) 4393 (14-5) 4402 (14-5) 4402 (14-5) 4393 (14-5) 4393 (14-5) 4393 (14-5) 4273 (14-0) 4402 (14-5) 4282 (14-1) 4393 (14-5) 4273 (14-0)
R Dump height (45° dump) mm (ft-in) 3395 (11-2) 3331 (10-11) 3289 (10-9) 3458 (11-4) 3416 (11-2) 3331 (10-11) 3289 (10-9) 3211 (10-6) 3149 (10-4) 3338 (10-11) 3296 (10-10) 3211 (10-6) 3149 (10-4)
S Dig depth mm (ft-in) 56 (0-2) 56 (0-2) 56 (0-2) 91 (0-4) 91 (0-4) 91 (0-4) 91 (0-4) 56 (0-2) 56 (0-2) 91 (0-4) 91 (0-4) 91 (0-4) 91 (0-4)
T Reach at dump height mm (ft-in) 1105 (3-8) 1265 (4-2) 1219 (4-0) 1162 (3-10) 1117 (3-8) 1265 (4-2) 1219 (4-0) 1385 (4-7) 1339 (4-5) 1283 (4-3) 1237 (4-1) 1385 (4-7) 1339 (4-5)
Reach maximum (45° dump) mm (ft-in) 2559 (8-5) 2623 (8-7) 2665 (8-9) 2509 (8-3) 2551 (8-4) 2623 (8-7) 2665 (8-9) 2743 (9-0) 2785 (9-2) 2629 (8-8) 2617 (8-9) 2743 (9-0) 2785 (9-2)
A Product
Operating weight (includes 80kg operator and full fuel tank) kg (lb) 19161 (42242) 19234 (42403) 19283 (42511) 19354 (42668) 19403 (42776) 19354 (42668) 19403 (42776) 19557 (43118) 19607 (43226) 19678 (43382) 19727 (43490) 19678 (43382) 19727 (43490) of Hard Work
JCB WHEELED LOADING SHOVEL | 456 ZX
LOADER AXLES
Heavy duty three ram geometry provides high breakout forces with excellent loading characteristics. The pin, bush and sealing Type Epicyclic hub reduction
design on all pivot points provide extended maintenance intervals. Make & model Graziano PR24 front / PR15 rear
Overall axle ratio 23.538 : 1
Rear axle oscillation 25°
ENGINE
6-cylinder wastegated turbo-charged, liquid cooled, direct injection diesel. Air-to-air charge-air cooling ensure low emissions and
“clean-burn” combustion chamber provides minimum fuel consumption. A remote sump oil drain facility simplifies servicing. STEERING
Type 4 stroke direct injection
Priority steer hydraulic system with emergency steering. Piston pump meters flow through steer valve to provide smooth low effort
Model 6CT 8.3C response. Steering angle ± 40°. Steer rams fitted with end rod damping to provide cushioned steering at full articulation. Adjustable
Capacity litres (in3) 8.3 (504.5) steering column.
Bore mm (in) 114 (4.49)
Stroke mm (in) 135 (5.32)
Aspiration Turbo charged
Cylinders 6 BRAKES
Max gross power to SAE J1995/ISO 14396 kW (hp) @ 2000rpm 161 (216)
Rated gross power to SAE J1995/ISO 14396 kW (hp) @ 2200rpm 153 (205) Hydraulic power braking on all wheels, operating pressure 80 bar (1160psi). Dual circuit with accumulator back-up provide
Nett power to SAE J1349/EEC 80/1269 kW (hp) @ 2200rpm 147 (197) maximum safety under all conditions. In board mounted, oil immersed, multi-plate disk brakes with organic brake linings are
environmentally acceptable. Parking brake, electro-hydraulic disc type operating on transmission output shaft.
Max torque Nm (lbf.ft) @ 1400rpm 994 (733)
Emissions:-
Relevant standards EUNR MM Stage 2 USA CFR Part 89
(Complies with EU/EPA “Off Highway” Construction Equipment Regulation Stage 2).
TRANSMISSION
4 wheel drive, automatic smooth shift transmission electrically operated selector and gear change incorporating a speed inhibitor
and modulation for smooth, responsive on-the-move direction and ratio changes. Single stage integral torque converter
4 forward and 3 reverse gears.
A Product
of Hard Work
JCB WHEELED LOADING SHOVEL | 456 ZX
A variety of tyre options are available including: 24 volt negative ground system, 70 Amp alternator with 2 x 126 Amp hour low maintenance batteries. Isolator located in rear
23.5 x 25 x 20 ply (L2). 23.5R25 RL-2+ (L2). 23.5 x 25 x 20 ply (L3). 23.5R25 XTLA (L2). 23.5R25 GP2B (L2). of machine. Ignition key start/stop and pre-heat cold start. Primary fuse box. Other electrical equipment includes quartz halogen,
23.5R25 VUT (L2). 650/65 R25 XLD (L3). 23.5R25 XHA (L3). 23.5R25 VMT (L3). 23.5R25 XRD1A (L4). twin filament working lights, front/rear wash/wipe, heated rear screen, full road going lights, clock, gauge and warning light
23.5R25 XMINED2 (L5). 750/65 R25 XLD (L3). monitoring. Connectors to IP67 standard.
Variable displacement piston pump feed a “load sensing” system providing a fuel efficient and responsive distribution of power as
required. Main services are servo actuated from a single lever (joystick) loader control. Auxiliary circuit controlled via additional lever
or joystick mounted electrical buttons. Accumulator back-up is available to control loader in the event of loss of pump pressure.
CAB
Pump type Twin variable displacement piston pump
Pump 1 max. flow l/min (UK gal/min) 163 (36) Resiliently mounted ROPS/FOPS structure (tested in accordance with EN13510 : 2000/EN13627 : 2000 (Level 2). De - luxe
Pump 1 max. pressure bar (lb/in2) 250 (3625) operator environment combines ergonomically located controls with a high level of appointment and low internal noise levels.
Pump 2 max. flow l/min (UK gal/min) 163 (36) Entry/exit is via large rear hinged door and anti - slip steps. Excellent forward visibility is provided by a 3 section curved, laminated
windscreen and full glazing below waistline. Extensive instrumentation includes electronic monitoring panel and display (EMS).
Pump 2 max. pressure bar (lb/in2) 160 (2320)
Heating / ventilation provides balanced and filtered air distribution throughout the cab via a powerful 8 kW capacity heater.
Hydraulic cycle times at full engine revs seconds
The unitary construction allows easy sealing and prevents ingress of dust. A transmission lock on the selector prevents inadvertent
Arms raise (full bucket) 5.8 engagement and the loader controls can be isolated for safe road travel.
Bucket dump (full bucket) 1.2 Exterior power level : 72 Lp (A)
Arms lower (empty bucket) 4.1 109 Lw (A)
Total cycle 11.1
A Product
of Hard Work
JCB WHEELED LOADING SHOVEL | 456 ZX
An extensive range of attachments are available to fit directly or via the JCB quickhitch mounting. Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, single lever or multi lever servo control,
high breakout forces with excellent loading characteristics.
Engine: Air cleaner 2 stage dry type – cyclonic with primary and safety elements, sedimenter, twin bowl fuel filters, alternator and
air conditioning compressor drive belt guards, isolated cooling package with hydraulically driven cooling fan.
Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolator
switch, direction changes and kickdown on gear selector and loader control lever.
Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear.
SERVICE FILL CAPACITIES Brakes: Multi-plate wet disc brakes, organic linings, dual circuit hydraulic power. Parking disc brake on transmission output shaft.
Hydraulics: Twin piston pumps with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support,
litres (UK gal) 3rd spool auxiliary hydraulic circuit as option.
Hydraulic system 215 (47.3) Steering: Adjustable steering column, “soft feel” steering wheel 5 turns lock to lock, resilient stops on max lock.
Fuel tank 320 (70.4) Cab: ROPS/FOPS safety structure, cigar lighter, ashtray, interior reading light, centre mounted master warning light. Electronic
monitoring panel with LCD message display. Two speed intermittent front windscreen wipe/wash and self park, single speed rear
Engine oil sump 18.9 (4.2)
windscreen wipe/wash and self park. 3 speed heater/demisting with replaceable air filter, LH and RH opening windows, sun visor,
Transmission oil system 34 (7.5) internal rear view mirror, external mirrors, adjustable suspension seat with belt and headrest, operator storage facilities, laminated
Axle oil (front) 69 (15.2) windscreen, heated rear screen, loader control isolator, horn, adjustable armrest.
Axle oil (rear) 51 (11.2) Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, battery
Engine coolant system 40 (8.8) isolator, radio wiring and speakers, 70 amp alternator, rotating beacon.
Bodywork: Front and rear fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery hitch,
lifting lugs.
OPTIONAL EQUIPMENT
Air conditioning, limited slip differentials front/rear axles, oil bath air cleaner, Turbo 2 and dust buster pre-cleaner, visibowl
pre-cleaner, tooth guard, replaceable bucket wearparts, sealed alternator, 100 amp alternator, epoxy coated radiator/coolers,
automatically reversing cooling fan, stainless steel brake pipes, smooth ride system (SRS), hydraulic quickhitch, full rear fenders,
reversing camera (colour), additional front and rear worklights, auto greasing system, auxiliary proportional control buttons on
joystick, spark arrestor, 24V to 12V in cab converter, cab screen guards, additional front and rear work lights, heated air suspension
seat, heated mirrors, extra counterweight, light guards, front and rear blinds, engine block heater, biodegradable hydraulic oil,
cab filtration options, fire extinguisher, number plate light kit.
Machine as above including: fully belly guard kit, turbo 2 precleaner, automatically reversing fan, carbon cab air intake filter,
front and rear light guards, white noise reverse alarm, auxiliary work lights, widecore radiator, full Wastemaster branding.
A Product
of Hard Work
JCB WHEELED LOADING SHOVEL | 456 ZX
By making constant and massive investments in the latest production technology, the JCB factories
have become some of the most advanced in the world.
By leading the field in innovative research and design, extensive testing and stringent quality control,
JCB machines have become renowned all over the world for performance, value and reliability.
And with a global sales and service network of more than 650 dealers and agents, we aim to deliver
the best customer support in the industry.
Through setting the standards by which others are judged, JCB has become one of the world’s
most impressive success stories.