Professional Documents
Culture Documents
Photo-Diagram
by Raphael Mausolf
paper size: at least 30cm paper type: thin, not too soft time to fold: 1-1,5h
step 17 : Fold the layers to the left and squash the top.
step 21 : Petal-fold.
step 25 : Pull out the hidden part and look at the top part now.
step 55 : Pull down the top extending the existing crease, the model wont lie flat from now on.
step 64 : Pull out the corner again and look from the front.
step 65 : Valley-fold aligning the edges, look from the top now.
step 69 : Reverse-fold to form the lower beak, the model wont lie flat at the part where the fold reaches the legs.
step 71 : Crimp beak to align with the edge and open sink the tip.
Step 73 : Fold the corner inside to hide it and lock the beak.
Step 74 : Shape the head to be round and voluminous. (the best way to do this is putting a crumpled tissue inside it)
step 75 : You may have to use MC to make the halfs of the lower beak hold together. Look at the legs now.
step 76 : Fold the first and the fourth toe to the left.
step 81 : Repeat steps 76 to 80 on the other leg. Look at the tail now.
finished model