Professional Documents
Culture Documents
Model:HW-E70TVE SERIES
FRONT LOAD
WASHING MACHINE
Service Manual
Suited model:
HW-E1470TVE HW-E1270TVE HW-E1070TVE HW-E870TVE HW-E1470TVE ME HW-E1270TVE ME HW-E1070TVE ME HW-E870TVE ME
Model:HW-E70TVE SERIES
1Contents---------------------------------------------------------------------------------------1 2Features --------------------------------------------------------------------------------------2 3Sale points------------------------------------------------------------------------------------2 4Specification ---------------------------------------------------------------------------------3 5Safety------------------------------------------------------------------------------------------5 6Installation ------------------------------------------------------------------------------------8 7Net dimension -------------------------------------------------------------------------------11 8Names of the parts-------------------------------------------------------------------------12 9Operational Functions---------------------------------------------------------------------13 10Trouble shooting--------------------------------------------------------------------------16 11Wiring circuit -------------------------------------------------------------------------------26
Model:HW-E70TVE SERIES
FEATURES
300mm diameter porthole, door may be open at a 180 degrees.
Facilitate view of wash process, facilitate unloading and easy to use with large port.
Sale points
One sentence for simplicity The capacity of this washing machine is 7kg,so you can wash more clothes than others Three sentences for convenience: I. Choose from 11 programs, convenient uses to provide you much benefit II. Front-Load structured to ensure placing clothes much more facility III. Humanistic design for control panel to help expedient operation Five sentences for tech-support: I. No need to be worried because of the function of intelligent-memory II. Satisfied to encourage childrens curiosity because of the child-lock III. Perish your trouble because of the alarm to the fault IV. Make you happy because of quick-wash in 29 mins V. Reassure for you because of the 24hours pre-wash which may offer you washing anywhere and anytime.
Model:HW-E70TVE SERIES
SPECIFICATION
1. Proposal Front loaders washing machines Product identification Description of appliance Type of appliance (FS = standing, BI = built-in) Supplier own brand Supplier bar code Mares computer code Commercial Brand / Model Commercial bar code Key-Features Energy efficiency class Washing performance class Spin efficiency class Programs Capacity Spin speed (max. / optional) Noise level(spin) Energy consumption per wash circle * Water consumption* Residual dampness (spin result) Spin speed selector switch (steps) Spin speed variator (stepless) Adjustable thermostat (water temp. adjust from - to) Drum capacity dry laundry / water Auto water level adjust (depending on volume of filled in laundry) Washing time (max.) Washing temperatures (program-controlled) Certification's (CE / ISO 9001 / ISO 9002) Approvals (VDE/GS / TV/GS / IMQ) * EN 60456 (60C cycle, full load without pre-wash) = COLD Basics data Unit dimensions (H x W x D) Net weight Voltage/frequency Input power / main fuse (intensity) Work top / removable Control M = electromechanical, E = electronic, F = fuzzy Inner cylinder S = stainless steel / Z = zinc coated Outer cylinder P = Plastic / S = stainless steel Door: aesthetic (R = round, Y = big eye, Q = square) Diameter Outer door frame S= stainless steel / M = metal / P = plastic Inner door G= glass / P= plastic Detergent compartments Removable compartment for liquid detergent Delay timer (from - to) Self cleaning suds pump Water inlet hose cold water / hot water Water drain hose / -support Adjustable feet Safety systems Auto door lock Motor overheating protection No heating without water Auto water cool-down (before drain 90C boiled water) ACQUA Stop kit
2006
New Sensor
HW-E70TVE SERIES
EAN A A B n 11 kg 7 1200-400/1400-400 rpm 1000-400/800-400 dB(A) 71 kWh 1.10 l 53 % 50% rpm rpm C 90/60/50/40/30 kg / l 7/53 AWL min 178 C 30 - 90 CE / ISO 9001 TV cm kg V/Hz W/A 84.0 x 59,5 x 590 73 220-240V~50Hz 2000/10 -/ E S P Y 30 P G 3 0.5-24 // 4
2.
3.
cm n h
4.
Model:HW-E70TVE SERIES
n n n 1 1 1 ///-/ /-/ rpm -
Child protection Programs 1) Strong action /cotton cycles 2) Normal action / synthetics 3) Delicate action / wool cycles Pre-wash / wash Quick wash / super quick wash Rinse / soften Delicate / hand wash Wool / cashmere Soak / spin Drain Easy ironing Optional function keys (additional program settings) ON/OFF button Half load Fussy Spin exclusion Spin reduction High water level No Soak Rinse stop Delicate Cold wash Sport wash ECO
Stand for having the function
Model:HW-E70TVE SERIES
Model:HW-E70TVE SERIES
Model:HW-E70TVE SERIES
Model:HW-E70TVE SERIES
Model:HW-E70TVE SERIES
Model:HW-E70TVE SERIES
10
Model:HW-E70TVE SERIES
Net dimension
595
590
840
11
Model:HW-E70TVE SERIES
Top panel
Display
Selection knob
door
Door handle
12
Model:HW-E70TVE SERIES
13
Model:HW-E70TVE SERIES
14
Model:HW-E70TVE SERIES
15
Model:HW-E70TVE SERIES
HW-E70TVE SERIES
Error message:Door is not properly shut 20s after program is started. Troubleshooting:
Pushing the door to Check Whether Door is properly shut or not
Y Cut off the power and then turn on again. Check the voltage between brown wire and red wire of door lock, is it between AC 220-240V? N Connect the wire properly Y
Door
lock
is
broken
and
need
Check if the wire connecting door lock and computer board is loose
N Check the voltage between grey wire and white wire of computer board, is it between AC 220-240V?
Error message:Drainage error, water not emptied within 4 min. Troubleshooting: Cut off power and water
Check if water is emptied Y
level pressure switch wire connection, measure the resistance of 1 and 3 pin, is it infinite? If not, it is water level pressure switch failure and replace it. If it is, then repair and check computer board and wire as followed.
N Check if drain pump acts by touching pump position N Check if drain pump or drain pipe is jammed, and open the filter and clean
16
Model:HW-E70TVE SERIES
The wire between computer board and drain pump is not connected properly. Replace the wire.
(Fig1)
Error message:Temperature sensor is not properly connected or damaged (display at the end of a program). Troubleshooting:
Cut off power and measure the resistance N of temperature sensor by multimeter, is it between 5-14k? Y NTC exist open circuit .Replace it
Check the blue wire and black wire of NTC, are they connected well? N Y
Disconnect the white wire and black wire from computer board, and measure if the resistance between blue wire and black wire of PCB is it infinite? N
Replace wire Y
17
Model:HW-E70TVE SERIES
Error message :The heater may be broken Troubleshooting: Cut off power ,check the resistance Of two pins of heater element by multimenter is it between 30-35 ? Y Heater element must be broken please replace it
Turn on power ,and set wash mode,then start ,check the export voltage of heater element between 12-6 and J9-9 ,is it between AC 220-240V?
Error message:The required water level is not reached within 8 min. Troubleshooting:
Check if water is leaking from washer bottom. inlet pipe. drain pipe or other pipe connection N Check if tap is closed or water pressure is too low (usual between0.03 -1 MPa) N Clean inlet valve Check if inlet valve is jammed Y Open the tap or wait for normal water pressure to use Y Readjust or replace the broken parts
18
Model:HW-E70TVE SERIES
Observe if the height of
Turn on power, and set pre-wash mode, then start. Check the import voltage of electromagnetic valve by multimeter , is it between AC 220-240V between the white wire and red wire that they are not connected?Voltage is220-240V between white wire and white wire,between red wire and red wire
The wire connected PCB and inlet valve is not Check if export voltage from computer board to electromagnetic valve, is it between AC 220-240V that voltage between grown wire and white wire of PCB ? N Y properly. Please reconnect it or replace it.
(Fig 2)
Replace computer board
19
Model:HW-E70TVE SERIES
Error message:Motor speed error .it may be not properly connected or damaged. Troubleshooting :
Connect them well and test. N connected well
Y
Connect them properly and test. Check if the wire of motor is connected well with computer board. N
Y
Pull out the motor insert string, and check the resistance of motor speed measurer and the Replace the motor. winding of the motor, is it as N followed?From up to down,The order is M1.M2.M3.M4.M5.M6.M7.M8.M9.M10 : the resistance between M5and M10 is 1.67~1.85. the resistance between
M8and M9 is 1.69~1.87.
Check the import voltage between M1 wind and M2 wind, is it between AC 220-240V? N
20
Model:HW-E70TVE SERIES
Pull out the wire connection of motor and computer board.Then check if circuit is open by multimeter N
Repair wires
Turn on power and set spin mode,then start.Check the import voltage Y
21
Model:HW-E70TVE SERIES
Pull out water switch inserts and turn on power, then set wash mode. While water is entering at the position of 1/4 glass window, check the resistance between and , is it 0? Check the resistance between and , is it infinite? N
Without power ,connect inlet pipe to inlet Y vavle,then open the tap and observe if water is entering in dispenser N
Replace Without starting but electrifying, measure the import voltage of inlet valve, is it between AC 220-240V? Y computer board
HW-E70TVE SERIES
Failure:Display nothing Troubleshooting:
Repair power supply Measure the power supply ,is it exists 220V-240V AC voltage Y Press the power switch Is power switch on? Y Press power switch and check the voltage between two pins of power switch. Is there 220-240V AC voltage between blue wire and brown wire? Y Make sure power supply cable assembly is N N connected well and then replace power switch. N N
22
Model:HW-E70TVE SERIES
Cut off power and check if plugs are connected well by pulling the plug of computer board. Y Check if power plug exists 220V-240V AC voltage at the import pin N
Replace PCB
Check if water is leaking from washer connection, especially between inlet pipe and tap. to make sure of no bends. N Clean filter Y Reconnect inlet pipe.
Choose pre-wash program and start Check if there is 220-240V at import pin of electromagnetic valve
N Reconnect the wire Is there open circuit between Y electromagnetic valve and computer board? N Choose pre-wash program and start then check if there is 220-240V at export pin of electromagnetic valve Replace PCB
See fig 2
Turn filter anticlockwise open and check if filter is jammed N Y Clean and tighten filter clockwise.
23
Model:HW-E70TVE SERIES
Turn on power and choose spin program to start. Measure if import voltage of drain pump is 220-240V
N Cut off and check if the connection between Y drain pump and computer board is open N Replace Replace the wire.
Turn on and choose spin program to start. Measure if export voltage of PCB to drain pump is 220-240V
See fig 1
PCB
Adjust adjustable feet Is washer in balance? Y Is belt loose or worn? N Are the screws of counterweight and motor loose? N Remove belt and turn belt pulley by hand, and then check if there is different N Turn on power and set spin program, then start check if there is different noise from motor Y Dismantle triangle and check the bearing .If it is broken, replace it. Fasten them Y Replace it N
Replace motor
24
Model:HW-E70TVE SERIES
Readjust it.
Is drain pipe broken N Check if there is foreign material nipped between cushion of sight window and sight window N Check if all tubes and tie-in is leaking water, including the connecting of tube and valve, dispenser, tube and dispenser ,outer cylinder-cushion of sight window-hose and outer cylinder, drain pump and gas valve N Is cushion of sight window broken?
Remove clothes Y
Reassemble or repair
Replace window
cushion
of
sight
25
Model:HW-E70TVE SERIES
Wiring circuit
26
Model:HW-E70TVE SERIES
Sincere Forever
Group
Industrial Park, No.1, 266101, Qingdao,
http://www.haier.com
Road China
27