Professional Documents
Culture Documents
Features
Suitable for remote applications. Low cost due to wafer level trimming. Calibrated directly in Celsius (Centigrade) . 0.5 accuracy guaranteeable (at +25 C). Rated for full -55 to +150 C range. Low self heating, 0.08 C in still air. Module triple output mode, digital output is simple, analog output more accurate, serial output with exact readings. Low impendence output, 0.1W for 1mA load.
Applications
Fahrenheit Thermometer. Remote applications.
www.researchdesignlab.com
2|P ag e
DIGITAL TEMPERATURE SENSOR
Specification
Parameter Operating voltage Temperature Operating current Value +5v -55 to +150C Less than 60A
Pin details
Pin 1 2 3 4 5 6 Name out +5v gnd rx tx gnd Details Active high output Power supply Power supply gnd receiver transmitter Power supply gnd
Working
The sensor has a sensitivity of 10mV / oC. The output of LM35 is amplified using a LM324 single power supply (+5V) op-amp. The op-amp is designed to have a gain of 5. The circuitry measures temperatures with a resolution of
www.researchdesignlab.com
3|P ag e
DIGITAL TEMPERATURE SENSOR
up to 0.5 degree Celsius. The output voltage is converted to temperature by a simple conversion factor. The general equation used to convert output voltage to temperature is: Temperature ( oC) = (Vout * 100) / 5 C So if Vout is 5V, then, Temperature = 100 C The output voltage varies linearly with temperature.
Sample Application
To view sample code and schematic click the below link: http://researchdesignlab.com/index.php/sensors/temperature-sensor.html
Board Dimensions
40.64mm
25.4mm
www.researchdesignlab.com
4|P ag e
DIGITAL TEMPERATURE SENSOR
To view the complete datasheet of LM35 IC click the below link: http://forum.researchdesignlab.com/datasheet/lm35
www.researchdesignlab.com