Professional Documents
Culture Documents
APPLICATION CHART
Use this chart to PowerGuard Your Project.
Brick Cantera Clay Concrete Flagstone Granite Grout Interlocking Pavers Limestone Marble Pavers Quarzite Saltillo Slate
Stamped Concrete
Water & Stain Resistant Water-Based & Breathable Interior & Exterior
X
X
IMPREGNATING SEALER
PENETRATING SEALER HIGH GLOSS SEALER & JOINT STABILIZER SEMI GLOSS SEALER & JOINT STABILIZER COLOR ENHANCER & SEALER
SEALING TIPS
Before sealing; always test on an uninstalled piece. Neutralize any acid with water and baking soda. Make sure surface is clean and completely dry. Ideal temperatures for sealing are 65F - 80F. Do not seal in direct sunlight when temperature is above 90F, as flashing may occur, or if rain is expected within next 72 hours. Each product is a stand alone product. Start and finish your project with the same sealer.
#PGYP
DISTRIBUTED BY:
WaterBasedSealer.com
IMPREGNATING SEALER
The ultimate invisible protection for all Marble, Granite, Travertine, Polished Stones, Limestone, Flagstone, Concrete, Stamped Concrete, Clay, and most porous surfaces. 898 provides the highest degree of stain resistance while maintaining the Unsealed Look. 898 is a water based emulsion that incorporates chemicals usually found in solvent base products. Once the water evaporates, the solvent based properties remain. For powerful results, allow 24 hours.
Non Yellowing Wet Look Does Not Crack or Peel Excellent Hot Tire Performance Excellent Chemical Resistance High Melt Point Adds Integrity to Grout
Clarity of Color Depth of Color Long Lasting Natural Wet Look without the Gloss Non Slip Finish Great Coverage
888 offers great early water and stain resistance. That means it will become impervious to reemulsification in a shorter time than other products in the market. Additionally, 888 is a joint stabilizer, making it ideal for interlocking pavers. Stabilize sand while sealing pavers in one step, saving time and money.
PENETRATING SEALER
For pavers, bricks, slate, concrete, stamped concrete, clay, saltillo, stone, stucco, masonry, and grout. 858 provides extreme water protection while maintaining the Unsealed Look. As a user friendly product, 858s anti-chalking formula keeps the surface looking prestine. Do not use 858 on marble or granite, it may etch the surface. Allow 24 hours for dramatic results.
818 provides plastic film forming protection with a low sheen finish. PowerGuard 818 outperforms other products in clarity of gloss, protection, and hardness.