Professional Documents
Culture Documents
This workbook is for the analysis of 2D Trusses limited to 3 nodes and 2 elements connected in
The geometry, boundary conditions and applied loads need to be specified, EA is 1000 for all el
Sheet S1 is for the inputs for problem definition and also the corresponding outputs.
Sheet S2 is for the element matrices and the overall stiffeness matrix
NOTES
All inputs are to be provided in the Pink cells ONLY i.e.
Supports are represented by springs specified by their stiffenesses Kx and Ky, a stiffe
onding outputs.
1; 0
NOTE :: All inputs are to be provided in the pink colored cells ONLY.
0 0
2 2
0 2
L1 2.8284271247
L2 2
FYJ S1 0.7071067812
-100.00 S2 0
0.00 C1 0.7071067812
C2 1
FYJ 2 2
0.00 0.2000 0.7657
0.00 -1.306019E-19 -1.306019E-19
1.0261203875 0.9
1.306019E-19 1
Deformed configuration
scale factor
0.1
2
0.7657
Element # 1 Nodes NI=1 NJ=2
L= 2.83 C= 0.71 S= 0.71
EK = 353.55 0.00 -353.55 0.00 T = 0.71 -0.71 0.00
0.00 0.00 0.00 0.00 0.71 0.71 0.00
-353.55 0.00 353.55 0.00 0.00 0.00 0.71
0.00 0.00 0.00 0.00 0.00 0.00 0.71
Element # 2 Nodes NI=2 NJ=3
L= 2.00 C= 1.00 S= 0.00
EK = 500.00 0.00 -500.00 0.00 T = 1.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00 1.00 0.00
-500.00 0.00 500.00 0.00 0.00 0.00 1.00
0.00 0.00 0.00 0.00 0.00 0.00 0.00
u1 v1 u2 v2 u3 v3 Forces Disp.
GK = 1E+020 176.78 -176.7767 -176.7767 0 0 0.00 0.0000
176.78 1E+020 -176.7767 -176.7767 0 0 0.00 0.0000
-176.7767 -176.7767 676.7767 176.78 -500 0 0.00 0.2000
-176.7767 -176.7767 176.78 176.7767 0 0 -100.00 -0.7657
0 0 -500 0 1E+020 0.00 0.00 0.0000
0 0 0 0 0.00 1E+020 0.00 0.0000
0.00 EKG = 176.78 176.78 -176.78 -176.78 100 141.4214
0.00 176.78 176.78 -176.78 -176.78 100 1.42E-14
-0.71 -176.78 -176.78 176.78 176.78 -100 -141.4214
0.71 -176.78 -176.78 176.78 176.78 -100 -1.42E-14