Professional Documents
Culture Documents
Scotch-Grip
Scotch-Grip
Scotch-Grip
Rubber and
Gasket Adhesive 1300 is used
to bond and seal the doughnut
ring seal in the outer tub of a
washing machine.
3M
Scotch-Grip
Scotch-Grip
Scotch-Grip
Plastic Adhesives
In bonding plastic feathers and nocks onto
arrow shafts, 3M
Scotch-Grip
Plastic
Adhesive 4475 dries quickly to a firm bond.
1099 Excellent fuel and oil resistance. May be heat cured for
higher ultimate performance. Very low VOCs.
Light tan Up to 40 minutes 388 250 (121) cured
160 (71) uncured
Product Description Color (dry) Bonding range Overlap shear (psi)* Heat resistance F (C)
4475 Fast tacking. Dries quickly to firm bond. Water and
plasticizer resistance.
Clear Up to 10 minutes 655** 200 (93)
4693 Contact bond properties. Excellent adhesion to
polypropylene, polyethylene.
Clear Up to 60 minutes 97 160 (71)
1099L Excellent fuel and oil resistance. May be heat cured for
higher ultimate performance. Very low VOCs.
Light tan Up to 20 minutes 388 250 (121) cured
160 (71) uncured
4693H Contact bond properties. Excellent adhesion to
polypropylene, polyethylene.
Clear Up to 60 minutes 97 160 (71)
Typical Product Characteristics
ABS
Acetal
Acrylic
Epoxy
Cellulose acetate
Nylon
Phenolic
Polycarbonate
Polyester (glass reinforced)
Polyester film
Polyethylene (untreated, linear)
Polypropylene (untreated)
Styrene
Styrene (high impact)
Vinyl (rigid)
Vinyl (flexible, unsupported)
Vinyl (supported)
Adhesive
1099/L 4475 4693/H
NOTE: The technical information and data above should be considered representative or typical only, and should not be used for specification purposes.
* Birch to birch @ 0.5 inches/minute aged for 1 day at room temperature and 7 days at 120F (49C) prior to testing.
** Substrate failure.
Plastic Adhesive Guide
Bonding wood floor
samples to a plastic
display board.
Bonding plastic
vegetables and
other decorations
to wooden
baskets.
Pinball machine repair and refurbishing:
3M
Scotch-Grip
Plastic Adhesive 4693H
bonds and seals decorative translucent
plastic inserts into the playing surface
from the underside.
5 6
7
8
9
Printed in U.S.A.
2007 3M
78-9236-7173-5
3M and Scotch-Grip are
trademarks of 3M Company.
Industrial Adhesives and Tapes Division
3M Center Bldg. 21-1W-10
900 Bush Ave.
St. Paul, MN 55144
1-800-362-3550
www.3M.com/adhesives
PRODUCT USE: All statements, technical information and recommendations contained in this document are based upon tests or experience
that 3M believes are reliable. However, many factors beyond 3Ms control can affect the use and performance of a 3M product in a
particular application, including the conditions under which the product is used and the time and environmental conditions in which the
product is expected to perform. Since these factors are uniquely within the users knowledge and control, it is essential that the user
evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the users method of application.
WARRANTY AND LIMITED REMEDY: 3M warrants that each 3M product meets the applicable specifications at the time 3M ships
the product. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A
COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a
particular purpose and suitable for users application. If the 3M product is defective, your exclusive remedy and 3Ms and sellers sole
obligation will be, at 3Ms option, to repair or replace the product or refund the purchase price. LIMITATION OF LIABILITY: Except
where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect,
special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.