Professional Documents
Culture Documents
Dragflow was founded in the late 1980's as a manufacturer of high quality submersible dredging pumps for
the European market. With early successes we expanded the product line to a full range of electric and
hydraulic pumps and small turn key dredges.
Through our commitment to quality products, dependable service and continuous improvement dragflow has
become established worldwide as the pump of choice for severe service conditions where other pumps fail.
Dragflow North America offers the toughest Slurry Agitator Submersible Pumps and Dredges in the Industry
for handling rocks, gravel, sand, minerals, bentonite, bitunen and others, with the shortest delivery times to
the US market.
5. THRUST BEARINGS
All Dragflow models have been designed with dual thrust bearings
to reduce vibration and counter thrust loads in both directions.
3. OVERSIZED MOTORS
All Dragflow electric motors are oversized and are
designed for slurries up to 1.6 SG. An Hydraulic drive
version is also available providing higher output. Dragflow
hydraulic augers EXHY can be attached directly to the
pump creating a self contained excavating system for
hard compacted sand where a mechanical excavator
would otherwise be required.
4. ROBUST CONSTRUCTION
Long life and reliability are guaranteed by robust heavyduty construction. Extra strong wear components provide
extended life between spare part changes. El-150 weights
3,500 Kg. which is significantly heavier than comparable
150 HP sand pumps. All parts that are exposed or
subjected to abrasive wear are manufactured in GS 500 or
Hi Chrome alloys.
7. STRUCTURAL CHARACTERISTICS
Adjustable Hi-Chrome suction side Wear Plate maintains
maximum performance for extended periods by a simple
adjustment of the gap between the wear plate and the impeller.
Service Bolt: These bolts allow easy pump disassembly, a built in
service tool. Replaceable wear parts: casings, impellers, wear
plates all can be replaced independently
Reversible agitator: doubles the life of the agitator
Lube Oil Inspection Ports: A wide-angle port outside the pump
ensures easy inspection of shaft seal oil levels as well as providing
easy access for oil replacement.
Dragflow North America offers the toughest Submersible Slurry Agitator Pumps and Dredges in
the Industry for handling rocks, gravel, sand, minerals, bentonite and others, with the shortest
delivery times to the US market. Manufactured in Italy, Dragflow pumps delivers massive solids
production at very low operational costs.
Electric and hydraulic pumps, cutters, excavators, and multiple accessories are integrated in
Powerful Dredges with Operator Cabins on Board or Remote Controlled Dredges of diverse
configurations including the latest Amphibious Multipurpose Dredge. Hydraulic Power Packs,
Umbilical Oil Hoses on Hydraulic Reels, Booster Pump Stations and others, are part of the
diversity of products that complement the highest head submersible slurry pump available in
the industry. These units, capable of working at depths of 300+ feet, in adverse conditions, can
pick up 4.5 inch solids in a 1.6 Specific Gravity Slurry at 70% solids by weight.
Reasons why Dragflow is the best option:
Low Rotation Speed
Seal Configuration
Pressure Compensators
Reversible Agitators
Hydraulic and Electric Versions
High Pressure Water Jets
Cutters, Excavators and Augers
Antiturbidity Bell
Geomembrane Protector
Highest Head Slurry Submersible Pump in the Industry.