Professional Documents
Culture Documents
2.
An administrator for a virtual server named abc17 mounts a new volume named vola at junction named /
accounting/teama and creates two directories at the root of the new volume named 2011 and 2011/june. Healso copies a
file called report.doc into the directory named june. An NFS client
mounts to the root of the namespace. What is the fully qualified path to the report.doc?
A. /abc17/accounting/teama/2011/june/report.doc
B. /accounting/teama/2011/june/report.doc
C. /accounting/vola/teama/2011/june/report.doc
D. /vol/vola/2011/june/report.doc
E. Z:\vola\2011\june\report.doc: /accounting/teama/2011/june/report.doc
3.
4.
5.
6.
7.
The Catalyst 2960 can be used only on the management network for clusters that have _____nodes.
A. 12
B. 16
C. 18
D. 20
E. 24: 24
8.
The Cisco Nexus 5010/5020 interconnect switches require ______ISL connections where the
CN1610 requires ___________ISL connections.
A. 4 ISL connections; 8 ISL connections
B. 8 ISL connections; 8 ISL connections
C. 8 ISL connections; 4 ISL connections
D. 4 ISL connections; 4 ISL connections: 8 ISL connections; 4 ISL connections
9.
10.
A clustered Data ONTAP 8.2 Infinite Volume can share an aggregate with an FlexVol volume.
A. True
B. False: True
11.
Clustered Data ONTAP 8.2 or later Quality of Service (QoS) Policies have which three characteristics? (Choose 3)
A. A LUN's QoS policies can be changed dynamically
B. A QoS policy can be decreased
C. A QoS policy can be increased
D. A Qtree's QoS policies can be changed dynamically
E. A volume can be a member of two QoS policies: A LUN's QoS policies can be changed dynamically, A QoS policy can be
decreased, A QoS policy can be increased
12.
13.
14.
15.
16.
17.
18.
An export policy can determine access to volumes for which of the following protocols?
A. iSCSI and FC volumes
B. CIFS and NFS volumes
C. iSCSI, CIFS, NFS
D. NFS volumes only
E. CIFS volumes only: CIFS and NFS volumes
19.
A FAS6280 running ONTAP 8.0.2 HAS A 32-bit root aggregate. After upgrading to Data ONTAP 8.1, what is the status of
the root aggregate?
A. The root aggregate remains 32-bit
B. The root aggregate converts from 32 to 64-bit in place
C. The root aggregate auto-migrates to a new 64-bit aggregate
D. The upgrade fails with a message to create a new 64-bit aggregate before upgrade: the root aggregate remains 32-bit
20.
21.
22.
23.
For RAID-DP aggregates created with clustered Data ONTAP 8.2 or later, what is the default minimum number of disks?
A. 1
B. 2
C. 3
D. 4
E. 5
F. 6
G. 10: 3
24.
For Vserver-aware NDMP backups, the ______________ must be enabled with cluster-aware backup extensions.
A. vServer management LIF
B. DMA server
C. Data LIF
D. Node management LIF: Data LIF
25.
26.
From the output of the command "network interface show", the logical interface that has a value of "false" under the "Is
Home" column signifies it (choose 2)
A. Is disconnected
B. Has failed over
C. Is administratively disabled
D. Has been migrated
E. Is currently being migrated to home node: Has failed over, has been migrated
27.
28.
How can you prevent a single SnapMirror relationship from utilizing more than the desired bandwidth?
A. Specify a SnapMirror throttle for the destination mode
B. Specify a SnapMirror throttle for the whole cluster
C. Specify a SnapMirror throttle for that relationship
D. Enable SnapMirror network compression: Specify a SnapMirror throttle for that relationship
29.
30.
How do you organize volumes for data clients with an appropriate export policy?
A. Mount the required volumes in a namespace
B. Mount the required namespaces in a volume
C. Mount the required namespaces in an aggregate
D. Mount directories of a volume in a namespace: mount the required volumes in a namespace
31.
How does the NetApp Remote Support Agent (RSA) connect to NetApp support?
A. NetApp Support initiates a secure connection to the RSA.
B. NetApp Support initiates a non-secure connection to the RSA.
C. The RSA initiates a secure connection to NetApp Support.
D. The RSA initiates a non-secure connection to NetApp Support.: The RSA initiates a secure connection to NetApp Support
32.
How many cluster nodes are supported by the CN1610 Interconnect Switch in 8.2?
A. 4
B. 8
C. 12
D. 16
E. 24: 12
33.
How many cluster nodes are supported by the CN1610 Interconnect Switch in clustered ONTAP 8.2?
A. 4
B. 8
C. 12
D. 16
E. 24: 12
34.
35.
How many cluster ports per node are supported in clustered ONTAP 8.2?
A. One
B. Two
C. Three
D. Four: Two
36.
How many cluster switch (es) are required for a NetApp cluster?
A. 1
B. 2
C. 4
D. 6: 2
37.
How many concurrent SSH administrative sessions for a node are supported?
A. 25
B. 64
C. 128
D. 125: 64
38.
How many ISL ports are required between the cluster interconnect switches when using Cisco switches?
A. 2
B. 4
C. 6
D. 8
E. None; No ISLs are required: 4
39.
How many ISL ports are required between the cluster interconnect switches when using CN1610 switches?
A. 2
B. 4
C. 6
D. 8
E. None; No ISLs are required: 4
40.
41.
42.
43.
44.
If a cluster is in quorum, what is the minimum number of participating nodes that must be healthy?
A. Two thirds
B. Simple majority
C. Three quarters
D. Half: Simple Majority
45.
If a customer has a 2-node cluster, which of the following must be enabled for storage failover (SFO) to function
properly?
A. cluster ha modify -configured true
B. cluster modify -node -eligibility true
C. storage failover modify -node enabled true
D. storage failover modify -node -hwassist true: cluster ha modify - configured true
46.
In a 2-node cluster with cluster HA enabled, which node has Epsilon by default?
A. the first node to join the cluster
B. the node that's been running for the longest amount of time
C. the node serving as mgwd ring master
D. the node with the lower system ID
E. neither node: neither node
47.
In clustered Data ONTAP 8.2 or later, what is largest number of nodes that can be supported with any enabled SAN
protocols?
A. 4
B. 6
C. 8
D. 10
E. 12
F. 24: 8
48.
49.
In clustered Data ONTAP 8.2, what is the maximum number of cluster nodes if any SAN protocols are being used?
A. 2 node
B. 4 nodes
C. 6 nodes
D. 8 nodes
E. 10 nodes
F. 24 nodes: 8 nodes
50.
In clustered Data ONTAP 8.2, which of the following commands will restore an entire volume?
A. volume snapshot promote
B. volume snapshot restore
C. volume snapshot resync
D. None of the above, just use the .snapshot or ~snapshot directory to restore the entire volume: volume snapshot restore
51.
52.
In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:
A. Vserver root volume
B. Absolute path of the volume
C. Aggregate name for the volume
D. Junction path for the volume: Junction path for the volume
53.
In clustered Data ONTAP, the NFS mount or the CIFS share path need to contain the following:
A. Vserver root volume
B. Absolute path of the volume
C. Aggregate name for the volume
D. Junction path name for the volume: junction path name for the volume
54.
55.
56.
In clustered Data ONTAP, which prompt verifies that you are in the cluster shell if the cluster is named "netappu"?
A. netappu-01%
B. netappu-01>
C. netappu-01::>
D. netappu::>: netappu::>
57.
58.
59.
60.
In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum cluster size for SAN protocols? (Choose 3)
A. 10 nodes
B. 6 nodes
C. 2 nodes
D. 4 nodes
E. 8 nodes
F. 12 nodes: 6 nodes, 2 nodes, 4 nodes
61.
In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum node size for SAN protocols? (Choose 3)
A. 24 nodes
B. 12 nodes
C. 8 nodes
D. 6 nodes
E. 4 nodes
F. 2 nodes: 6 nodes, 4 nodes, 2 nodes
62.
In Data ONTAP 8.1.1 Cluster-Mode, what is the maximum TCP read size for an NFSv3 client?
A. 1,048,576 bytes
B. 32,768 bytes
C. 65,536 bytes
D. 2,097,152 bytes: 1,048,576 bytes
63.
In transitioning SnapVault relationships from 7-mode to clustered Data ONTAP, which statements are true? (Choose 3)
A. You are required to re-create all Snapvault relationships with new baseline
B. You can plan on fan-in relationships of many source volume to one destination volume
C. You can plan on fan-in relationships at the system level, many volumes to one Vserver
D. You can plan on SnapMirror to SnapVault cascades: You are required to re-create all Snapvault relationships with new baseline,
You can plan on fan-in relationships at the system level, many volumes to one Vserver, You can plan on SnapMirror to SnapVault cascades
64.
In which shell can administrators natively run Data ONTAP 7-mode commands?
A. node shell
B. system shell
C. cluster shell
D. admin shell
E. diag shell: node shell
65.
In which shell can administrators natively run Data ONTAP 7-Mode commands?
A. nodeshell
B. systemshell
C. clustershell
D. adminshell: nodeshell
66.
67.
68.
69.
70.
Netapp Remote Support Agent (RSA) is supported which two FAS module types?
A. BMC
B. ILO
C. RLM
D. RTC
E. SP: RLM, SP
71.
The network interface show command output lists the value of "false" under the "Is Home" column. False signifies the
LIF __________. (Choose 2)
A. is disconnected
B. has failed over
C. is administratively disabled
D. has been migrated
E. is currently being migrated to home node: has failed over, has been migrated
72.
New systems are shipped with the root volume in a 64-bit aggregate starting with which Data ONTAP release?
A. 8.0.0
B. 8.0.1
C. 8.0.2
D. 8.1: 8.1
73.
74.
On the FAS6290 series controllers, what reference tool lists the on-board 10GbE ports used for the cluster network?
A. Tech.netwpp.com
B. Portconfiguration.netapp.com
C. HWU.netapp.com
D. FieldPortal.netapp.com
E. NetApp Cluster Port Usage Guide
F. Synergy: HWU.netapp.com
75.
76.
One node of a 2-node cluster is shut down to replace a NIC. All RDB rings fall out of quorum. To diagnose the problem,
what should the administrator do first?
A. Disconnect and reconnect the InfiniBand cable
B. Issue storage failover show from the clustershell
C. Issue cluster ha show from the clustershell
D. Verify that the cluster switch is functioning properly: Issue cluster ha show from the clustershell
77.
78.
Prior to breaking a SnapMirror DP relationship, which statement is true about mounting the
destination volume?
A. It can be mounted in the namespace of any Vserver in the source- or destination cluster.
B. It cannot be mounted until after the SnapMirror break is performed.
C. It can be mounted in the namespace of the destination Vserver.
D. It can be mounted only in the same namespace as the source volume.: It can be mounted in the namespace of the destination
Vserver.
79.
80.
81.
82.
Select the following statements that are true about unplanned storage failover (SFO). (Choose 2)
A. The "down" system is entirely virtually hosted by the HA partner and appears to be "up".
B. The data LIFs are always migrated to the HA partner
C. The surviving partner assumes ownership of the failed partners aggregates
D. The volume location database (VLDB) is updated with the new location of the aggregates and volumes: The surviving
partner assumes ownership of the failed partners aggregates, and The volume location database (VLDB) is updated with the new location of
the aggregates and volumes
83.
SnapVault backup between two different clustered Data ONTAP 8.2 or later systems requires what type of intercluster
communication?
A. Cluster Vaulting LIFs for intercluster communication
B. Cluster Replication LIFs for intercluster communication
C. Cluster Peering LIFs for intercluster communication
D. Cluster Backup LIFs for intercluster communication: Cluster Peering LIFs for intercluster communication
84.
SnapVault backup of a clustered Data ONTAP 8.2 or later system is done at what data set level?
A. Aggregate
B. Directory
C. FlexVol
D. Qtree: FlexVol
85.
A storage administrator create a Quality of Service ( QoS) policy named pgMB300 which sets a maximum throughput of
300MB/s, and a second Quality of Service policy named pglO200 which sets the maximum throughput to 200 IOPS. The
storage administrator assigns the pgMB300 QoS policy to Vserver vs1. The storage administrator then attempts to
assign the pglO200 QOS policy to vol1 of vs1. What is the outcome?
A. The attempt will succeed. You can assign Qos policy to storage object so long as single object does not have multiple
policy groups assigned to it.
B. The attempt will fail. You cannot have policies with differently maximum throughput units. They all have to be MB/s
or all have to be IOPS.
C. The attempt will succeed. You can nest IOPS policy limit instead a MB/s policy limit.
D. The attempt will fail. You cannot nest policy groups in any manner.: The attempt will fail. You cannot nest policy groups in
any manner.
86.
87.
The system image show command output lists the value of "true or false" under the "Is Current" column. The image
marked "true" indicates the image:
A. Is currently booted
B. Is the latest version
C. Will used after a reboot
D. Has just been downloaded: is currently booted
88.
89.
To operate DATA ONTAP 8.1 Cluster Mode SAN, what must be configured on both the initiator and the target?
A. Logical Unit Access Initialization
B. Physical Unit Access Initialization
C. Symmetric Logical Unit Access
D. Asymmetric Logical Unit Access
E. SAN Access Initialization Protocol: Asymmetric Logical Unit Access
90.
To support multi-tenancy, an administrator must create or enable which type of unique login account?
A. vsadmin, for the cluster
B. admin, for each Vserver
C. admin, for the cluster
D. vsadmin, for each vserver: vsadmin, for each vserver
91.
Using the following path: /users/sales/a1/smith, which are the two possible path types for "a1"?
A. A directory
B. A file
C. A LUN
D. A qtree: a directory, a qtree
92.
The vifMgr is out of quorum on the node that is the master for the vifMgr ring. Which of the following statements are
true? (Choose 2)
A. A new master will be elected for the vifMgr RDB unit
B. Epsilon will not be available in the cluster
C. Clients can access data through the LIFs on this node
D. A new LIF can be created for a data vserver: A new master will be elected for the vifMgr RDB unit, Clients can access data through
the LIFs on this node
93.
The VLDB is out-of-quorum on the node serving as the master of the VLDB ring. Which four statements are true?
A. A new VLDB ring master is elected.
B. Clients can write to volumes on that node.
C. Volumes cannot be moved to or from that node.
D. Clients can read from volumes hosted on that node.
E. New volumes can be created on aggregates hosted on that node.: A new VLDB ring master is elected., Clients can write to
volumes on that node., Volumes cannot be moved to or from that node., Clients can read from volumes hosted on that node.
94.
A volume is created named "new_acct" in a data vserver named vs2. A junction for this volume is created named "acct"
from the root of vs2. This namespace will be mounted on a Linux host. What is the path that the Linux host needs to
mount?
A. /vs2/new_acct
B. /vs2/acct
C. /new_acct
D. /vol/vs2/new_acct
E. /acct: /acct
95.
A volume is created named vs2_vol2 on aggregate netappu-02. It is mounted in the vs2 namespace at /vs2/vol2. Volume
move moves this volume to the netappu-01 aggregate. What is the path to this volume after the move?
A. /netappu-01/vs2/vs2_vol2
B. /vs2/vol2
C. /vol/vs2_vol2
D. /vol/vs2/vs2_vol2: /vs2/vol2
96.
A volume named volume217 resides on an aggregate named node7_aggr12 and is mounted in the namespace at junction
/source/april/test217. A file named revert.cpp is at the root of volume217. A volume move operation relocates volume217
to node3_aggr3. What is the fully qualified path to revert.cpp after the move is complete?
A. /node3_aggr3/source/april/test217/revert.cpp
B. /node3_aggr3/volume217/revert.cpp
C. /source/april/test217/revert.cpp
D. /vol/source/april/test217/revert.cpp
E. /vol/volume217/revert.cpp: /source/april/test217/revert.cpp
97.
A volume named vs2_vol2 is created on the netappu-02 aggregate. The path in the vs2 namespace is /vs2/ vol2. If the
volume is moved to the netappu-01 aggregate, what is the path after the move?
A. /netappu-01/vs2/vs2_vol2
B. /vs2/vol2
C. /vol/vs2_vol2
D. /vol/vs2/vs2_vol2: /vs2/vol2
98.
Volumes can be moved from 32-bit aggregates to which two types of aggregates?
A. 32-bit aggregates
B. 64-bit aggregates
C. Flex aggregates
D. Traditional aggregates: 32-bit aggregates, 64-bit aggregates
99.
100.
What are four storage efficiency features Data ONTAP 8.1 Cluster-Mode provides?
A. transparent files
B. thin provisioning
C. SnapVault
D. FlexClone
E. deduplication
F. compression: thin provisioning, FlexClone, deduplication, compression
101.
What are four storage efficiency features that Data ONTAP 8.1 or latter Cluster-Mode provides ?
A. transparent files
B. thin provisioning
C. SnapVault
D. FlexClone
E. deduplication
F. compression: thin provisioning, FlexClone, deduplication, compression
102.
What are some of the benefits to customers when using clustered Data ONTAP?
A. Scalability
B. Transparency
C. Flexibility
D. Non-disruptive operations: Scalability, Transparency, Flexibility, Non-disruptive operations
103.
104.
105.
What are the LIF roles that can be assigned to ports in clustered ONTAP?
A. Data
B. Cluster management
C. Cluster
D. Node management
E. Intercluster: Data, Cluster management, Cluster, Node management, Intercluster
106.
What are the LIF roles that can be assigned to ports in Data ONTAP Cluster-Mode?
A. Data
B. Cluster management
C. Cluster
D. Node management
E. Intercluster: data, cluster management, cluster, node management, intercluster
107.
What are the roles that can be assigned to physical ports in clustered ONTAP? (Choose 4)
A. Data
B. Cluster management
C. Cluster
D. Node-management
E. Intercluster: Data, Cluster, Node-management, Intercluster
108.
What are the three types of resources supported by Logical interfaces? (Choose 3)
A. VServer-routes
B. port
C. Interface groups
D. failover groups
E. cluster-routes
F. cluster
G. group-routes
H. VLAN: port, interface groups, VLAN
109.
What are the three types of Vservers in clustered Data ONTAP 8.2?
A. System Vserver
B. Node Vserver
C. Admin Vserver
D. Data Vserver
E. Management Vserver
F. Cluster Vserver: Node vservers, Admin vservers, Data vservers
110.
111.
112.
113.
114.
What are two defaults for a new Data ONTAP 8.1 or later system root aggregate?
A. 32-bit
B. 64-bit
C. 0% aggr reserve
D. 5% aggr reserve: 64-bit, 0% aggr reserve
115.
What are two ways a storage administrator can improve the operational availability of NAS application data?
A. By backing up data to a USB disk
B. By configuring ALUA on the host
C. By providing multiple data logical interfaces
D. By utilizing the volume move feature: By providing multiple data logical interfaces, By utilizing the volume move feature
116.
117.
118.
What command starts recording the current CLI session into a file?
A. system cli record
B. system record start
C. system script record
D. system script start: system script start
119.
120.
What communication link is necessary in order to establish cluster peer relations between two clusters?
A. The cluster interface on each node must be able to communicate with the intracluster interface on each node in the
peer cluster.
B. The cluster interface on each node must be able to communicate with the node-mgmt interface on each node in the
peer cluster
C. The intracluster interface on each node must be able to communicate with the intracluster interface on each node in
the peer cluster.
D. The intercluster interface on each node must be able to communicate with the intercluster interface on each node in
the peer cluster.: The intercluster interface on each node must be able to communicate with the intercluster interface on each node in the
peer cluster.
121.
122.
What feature balances load across a cluster while consuming less disk capacity than LS SnapMirror copies?
A. SnapVAult copies
B. FlexCache software
C. FlexClone copies
D. DP SnapMirror copies: FlexCache software
123.
What happens if a Load-Sharing (LS) mirror replies a Vserver root volume to any node in the cluster and you promote
one of the mirror destinations?
A. All clients temporarily gain read/write access to the root volume
B. The original source volume is prevented from becoming stale.
C. All clients must re mount.
D. There is no disruption for any connected clients.: All clients temporarily gain read/write access to the root volume
124.
125.
126.
127.
128.
What is the command to start recording the current CLI session into a file?
A. system cli record
B. system script record
C. system script start
D. system record start: system script start
129.
130.
131.
132.
133.
What is the file extension for NDMP backup CAB (Cluster Aware Backup Extension)
A. CAB
B. BAC
C. CAP
D. NDBC: CAB
134.
What is the first step for setting up a cluster Data ONTAP 8.2?
A. Cluster Setup
B. Join Cluster
C. Install second node
D. Enable HA: Cluster Setup
135.
136.
What is the maximum number of node a SAN cluster in Data ONTAP 8.2 can have?
A. 1
B. 2
C. 6
D. 8
E. 16
F. 24
G. 32: 8
137.
138.
What is the maximum number of nodes a SAN cluster in DOT 8.1 can have?
A. 1
B. 2
C. 6
D. 8
E. 16
F. 24
G. 32: 6
139.
What is the maximum number of nodes in a cluster that the Cisco Nexus 5010 supports?
A. 12
B. 18
C. 20
D. 24: 18
140.
What is the maximum number of nodes supported for a cluster serving only NAS protocols?
A. 1
B. 2
C. 4
D. 8
E. 16
F. 24: 24
141.
What is the maximum number of nodes supported for clustered Data ONTAP 8.2 serving only NAS protocols?
A. 1
B. 2
C. 4
D. 6
E. 16
F. 24: 24
142.
What is the maximum number of nodes supported for clustered ONTAP 8.2 serving both SAN and NAS protocols?
A. 1
B. 2
C. 4
D. 6
E. 8
F. 24: 8
143.
144.
What is the supported speed and frame size on the cluster interconnect?
A. 1 Gb / 1500 mtu
B. 1 Gb / 9000 mtu
C. 10 Gb / 1500 mtu
D. 10 Gb / 9000 mtu
E. No specific requirements: 10 Gb / 9000 mtu
145.
146.
What must be configured in clustered ONTAP 8.2 to support inter-cluster Snapmirror relationships? (Choose 2)
A. Cluster peering relationship
B. Intercluster port role
C. Junction path for the mirrored volume
D. Minimum transfer size
E. Vserver peering relationship: Cluster peering relationship & Vserver peering relationship
147.
What must be configured on the igroup in a multi-pathed SAN environment in clustered Data ONTAP?
A. Asymmetric logical unit access
B. Symmetric logical unit access
C. Dynamic multi-path access
D. LIF multi-path access
E. LUN multi-path access: Asymmetric logical unit access
148.
149.
150.
151.
What should an administrator do first before shutting down two nodes of a 4-node cluster?
A. Migrate node-management LIFs to a node that is staying up
B. Move Vserver root volumes to a node that is staying up
C. Reassign the master of all RDB rings to a node that is staying up
D. Set both nodes that are coming down to "ineligible": Set both nodes that are coming down to "ineligible"
152.
153.
154.
155.
156.
157.
158.
What two actions should an administrator take before shutting down two nodes of a 4-node cluster?
A. reassign the master of all RDB rings to a node that will be staying up
B. migrate node-management LIFs to a node that will be staying up
C. move Vserver root volumes to a node that will be staying up
D. set both nodes that are coming down to "ineligible"
E. ensure that Epsilon is assigned to one of the nodes that will be staying up: set both nodes that are coming down to
"ineligible", ensure that Epsilon is assigned to one of the nodes that will be staying up
159.
What type of configuration is required for SnapVault backup between clusters in two different clustered Data ONTAP or
later systems?
A. Vserver Peer Configuration
B. SnapVault Peer Configuration
C. Backup Peer Configuration
D. Cluster Peer Configuration: cluster peer configuration
160.
161.
162.
163.
164.
165.
When a pNFS 4.1 client is connected to a LIF on node 2 of an 8 node clustered Data ONTAP pNFS 4.1 Vserver, and the
data volume being read is moved to node 1, which statement is true?
A. The client redirects from a LIF on node 2 to a LIF on node 1 if available and continues data access uninterrupted.
B. The client stays connected to a LIF on node 2 and accesses the data on node 1 through the cluster network.
C. DNS records are updated and the client moves access to a LIF on node 1 from DNS referral.
D. When a data volume is moved, only CIFS clients are affected.: The client redirects from a LIF on node 2 to a LIF on node 1 if
available and continues data access uninterrupted.
166.
When a pNFS client is connected on a LIF on node 1 of a 4-node clustered Data ONTAP pNFS 4.1 vServer, and node 2
performs a storage takeover (SFO) of node 1, and LIFs fail over to node 3, which statement is true?
A. This mount goes stale.
B. The client waits for node 1 to come back up.
C. The pNFS redirects access to a LIF on node 2.
D. The client accesses the virtual IP of the cluster which handles access to the data during the failure.: The pNFS redirects
access to a LIF on node 2.
167.
When creating a LIF for NFS or CIFS, what is the default failover policy?
A. Priority
B. Nextavail
C. Round robin
D. Disabled: Nextavail
168.
When storage failover (SFO) occurs and cluster mode SAN protocols are enabled on a data vserver:
A. ALUA determines that the HA partner is an active direct path
B. ALUA determines that the HA partner is an active indirect path
C. ALUA determines the best path for active optimize LUN access even if it requires use of the
cluster interconnect
D. ALUA does not factor into the path selection during Storage Failover (SFO): ALUA determines that the HA partner is an
active direct path
169.
When using Data ONTAP 8.1 Cluster-Mode and later, what is the default for new aggregates?
A. 32-bit aggregates
B. 64-bit aggregates
C. 128-bit aggregates
D. cluster aggregates
E. traditional aggregates
F. Vserver aggregates: 64-bit aggregates
170.
171.
172.
Which are predefined roles for cluster administrators in clustered ONTAP 8.2? (Choose 4)
A. admin
B. read only
C. vsadmin
D. vsadmin-backup
E. vsadmin-readonly
F. backup
G. vsadmin-autosupport
H. none: admin, read only, backup, none
173.
Which are the role types that can be assigned to ports in clustered ONTAP? (Choose 3)
A. Data
B. Cluster-management
C. Cluster
D. Node-management: Data, Cluster, Node-management
174.
175.
176.
177.
178.
179.
Which command can be used to identify the target iqn name in Data ONTAP 8.1 Cluster-Mode and later?
A. cluster iscsi name
B. cluster iscsi nodename
C. cluster iscsi show
D. vserver iscsi nodename
E. vserver iscsi name
F. vserver iscsi show: vserver iscsi show
180.
181.
182.
Which commands can be used to identify the target iqn name in clustered Data ONTAP?
A. cluster iscsi show
B. cluster iscsi nodename
C. vserver iscsi nodename
D. vserver iscsi show
E. vserver iqn show: vserver iscsi show
183.
184.
Which Data ONTAP Cluster-Mode clone technology can clone an individual LUN Inside a volume without cloning the
entire volume?
A. FlexClone
B. LUN Clone
C. Snap Clone
D. Vol Clone
E. Aggr Clone: LUN Clone
185.
Which Data ONTAP Cluster-Mode clone technology will lock a Snapshot copy?
A. LUN Clone
B. Snapshot Clone
C. Volume Clone
D. Aggr Clone: LUN clone
186.
Which description of clustered Data ONTAP 8.2 Infinite Volume (InfiniVol) is true?
A. Infinite Volume Vservers can share aggregates
B. Infinite Volume Vservers use Traditional volumes
C. Infinite Volume Vservers and FlexVol Vservers can co-exist in the same cluster
D. Infinite Volume Vservers and FlexVol Vservers cannot co-exist: Infinite volume vservers and FlexVol vservers can co-exist in
the same cluster
187.
188.
Which feature makes it possible for a storage administrator to add more than storage systems to a cluster?
A. Scale horizontal
B. Scale out
C. Scale up
D. Scale vertical: scale out
189.
Which feature must be enabled on a FC switch when using the FC protocol with clustered Data ONTAP 8.1?
A. FL_Port ID Virtualization
B. N_Port ID Virtualization (NPIV)
C. FC over IP
D. FC over Ethernet
E. None of the above: N_Port ID Virtualization (NPIV)
190.
Which five protocols are supported by Data ONTAP 8.1 Cluster-Mode or later?
A. CIFS
B. FC
C. FCIP
D. FCoE
E. iFCP
F. iSCSI
G. NFS: CIFS, FC, FCoE, iSCSI, NFS
191.
192.
193.
Which four steps must an administrator take before establishing a CIFS share?
A. Create a volume
B. Configure a share policy with the desired values
C. Configure an export policy
D. Configure name mapping
E. Enable Active Directory routing
F. Mount a volume within the Vserver namespace
G. Set a default share policy: create a volume, configure an export policy, configure name mapping, mount a volume within the vserver
namespace
194.
195.
196.
Which logical interface does not have migration nor failover migration capabilities?
A. cluster management
B. node management
C. data
D. target: node management
197.
Which logical interface is created when you create a single-node clustered Data ONTAP system during cluster setup?
A. Two cluster LIFs
B. An intercluster LIF
C. A data LIF
D. A cluster management LIF: a cluster management LIF
198.
Which logical interfaces have failover and online migration capabilities in a different node? (Choose 2)
A. Cluster
B. Cluster management
C. Data (FC, iSCSI)
D. Data (CIFS, NFS)
E. Node-management: cluster management, data (CIFS, NFS)
199.
200.
Which NetApp Virtual Storage Tier component works aggregate-wide on a FAS controller?
A. Flash I/O
B. Flash Cache
C. Flash Accel
D. Flash Disk
E. Flash Pool: Flash Cache
201.
Which NetApp Virtual Storage Tier component works at the host level?
A. Flash Pool
B. Flash IO
C. Flash Disk
D. Flash Accel
E. Flash Cache: Flash Accel
202.
Which of the following are appropriate client specification for an export rule?
A. 0.0.0.0/0
B. 192.168.5.0/24
C. .eng.netapp.com
D. \\vs_root\192.168.153.128: 0.0.0.0/0, 192.168.5.0/24, .eng.netapp.com
203.
204.
205.
Which of the following is true about a data protection (DP) mirror destination volume? (Choose 3)
A. Can be in the same vserver as the source
B. Can be in a different vserver as the source
C. Can be on a different cluster from the source
D. Can be on a Data ONTAP 7-mode system
E. Can be smaller than the source: can be in the same vserver as the source, can be in a different vserver as the source, can be on a
different cluster from the source
206.
207.
Which of the following logical interfaces have failover and migration capabilities between nodes? (Choose 2)
A. Data (FC, iSCSI)
B. Cluster management
C. Data (CIFS, NFS)
D. Node management
E. Cluster interconnect: Cluster management & Data (CIFS, NFS)
208.
Which of the following logical interfaces have failover and migration capabilities?
A. client
B. cluster management
C. data
D. node management
E. controller: cluster management, data
209.
Which of the following privilege levels are found in clustered data ONTAP? (choose 3)
A. admin
B. advanced
C. diagnostic
D. system
E. cluster: admin, advanced, diagnostic
210.
Which of the following protocols can be used to obtain the clustered ONTAP 8.2 software image?
A. NFS
B. FTP
C. TFTP
D. HTTPS
E. HTTP
F. CIFS: FTP, TFTP, HTTP
211.
Which of the following shells are part of a Data ONTAP cluster? (Choose 3)
A. Management
B. Admin
C. System
D. Node
E. Cluster
F. Advanced: System, Node, Cluster
212.
Which of the following statements are true about data protection mirrors? (Choose 2)
A. A data protection source volume supports up to 4 destination mirrored volumes
B. A data protection source volume supports up to 1 destination volume per node
C. A volume must be created before it can be used as a mirror destination
D. Creating a mirror relationship also creates the destination volume: A data protection source volume supports up to 4
destination mirrored volumes, A volume must be created before it can be used as a mirror destination
213.
Which of the following statements are true about SAN LIFs? (Choose 2)
A. SAN LIFs are either up or down
B. NAS and SAN protocols can share the same LIF
C. SAN LIFS can migrate or failover
D. SAN LIFs can be associated with more than one data vserver
E. NAS and SAN LIFs can share the same data port: SAN LIFs are either up or down and NAS and SAN LIFs can share the same
data port
214.
Which of the following statements are true in a SnapMirror Load-Sharing (LS) mirror relationship? (Choose 2)
A. Client requests to write data are allowed if the user is admin
B. Client requests to write data are denied unless accessing the .admin share
C. Client requests to read data are only allowed if the mirror is up-to-date
D. Client requests to read data are redirected to the LS mirror destination volumes: Client requests to write data are denied
unless accessing the .admin share, Client requests to read data are redirected to the LS mirror destination volumes
215.
216.
217.
218.
Which of the following statements is true about giveback with storage failover?
A. The surviving partner returns ownership of all the aggregates all at the same time to its partner node
B. The surviving partner returns ownership of the all the aggregates and the data LIFS to its partner
C. The surviving partner returns ownership of the root aggregate first followed by the other aggregates to its partner
node
D. I/O only resumes when all aggregates are returned to the partner node: The surviving partner returns ownership of the root
aggregate first followed by the other aggregates to its partner node
219.
Which of the following statements is true about the cluster session manager? (choose 3)
A. Handles networking, NFS, and CIFS
B. Provides a communication mechanism between any network module or SCSI module and any data module
C. Provides a reliable transport for SpinNP traffic
D. Is used regardless of whether the network module or SCSI module and data module are on the same node or different
nodes: Provides a communication mechanism between any network module or SCSI module and any data module, Provides a reliable
transport for SpinNP traffic, and Is used regardless of whether the network module or SCSI module and data module are on the same node or
different nodes
220.
Which of the following steps must be completed before a CIFS share can be active?
A. Configure name mapping
B. License both NFS and CIFS
C. Create a data LIF for the CIFS server on every node
D. Reboot the node containing the CIFS Vserver root volume: configure name mapping
221.
Which of the following types of LIFs can be assigned a user-defined failover group? (Choose 3)
A. Cluster LIF
B. Node-management LIF
C. Cluster management LIF
D. NAS Data LIF (NFS,CIFS)
E. SAN Data LIF (iSCSI, FC): Node-management LIF, Cluster management LIF, NAS Data LIF (NFS, CIFS)
222.
Which of the following Vserver types are created automatically by the cluster setup process?
A. Management
B. Admin
C. Cluster
D. Node
E. Data
F. Diagnostic: Admin, Node
223.
224.
Which parameter must the cluster administrator properly define when configuring an iSCSI logical interface in Data
ONTAP 8.1 Cluster-Mode and later?
A. data-access
B. data-address
C. data-protocol
D. data-routing
E. No parameter needs to be defined as no additional parameter is required.: data-routing
225.
226.
Which process is used for client access for NFS and CIFS in Cluster-Mode?
A. accessd
B. accd
C. securityd
D. secd
E. mgwd
F. sysd
G. cached: secd
227.
228.
229.
Which protocols are supported with clustered ONTAP 8.2 Vservers with Infinite Volumes?
A. NFSv3 only
B. NFSv3, NFSv4 and NFSv4.1
C. CIFS, NFSv4 and NFSv4.1
D. SMB 1.x, NFSv3, NFSv4.1 and pNFS: SMB 1.x, NFSv3, NFSv4.1 and pNFS
230.
Which protocols does clustered Data ONTAP HA support with Infinite Volumes?
A. NFSv3, NFSv4.1, and SMB1.0
B. NFSv2 and SMB1.0 only
C. NFS v1, NFSv2, and NFSv3 only
D. NFSv2, NFSv3, and NFSv4.0 only
E. NFSv3 only
F. All supported NAS and SAN protocols on Data ONTAP: NFSv3, NFSv4.1, and SMB1.0
231.
232.
233.
234.
235.
236.
237.
Which statement is true about a Data Protection (DP) - type SnapMirror destination volume?
A. It can be in a Data ONTAP GX Cluster
B. It must be on the same disk type as the source volume
C. It can be smaller than the source volume
D. It can be on a different disk type than the source volume: It can be on a different disk type than the source volume
238.
239.
240.
241.
Which statement is true about clustered Data ONTAP 8.2 node based licensing?
A. When replacing a controller for a RMA the key is automatically updated to the serial number of new controller.
B. When replacing a controller for a RMA, a new key is needed but the existing key will work for 90 days.
C. A new clustered Data ONTAP 8.2 installation can use both 8.1 keys and 7-Mode keys.
D. Replacing a NVRAM card in a controller will NOT require new license keys for that mode.: When replacing a controller for
a RMA, a new key is needed but the existing key will work for 90 days.
242.
243.
Which statement is true about establishing a SnapMirror relationship in clustered data ONTAP?
A. It sets up the relationship, but does not start the initial transfer
B. It sets up the relationship on the source node only
C. It sets up the relationship and starts the initial data transfer
D. It sets up the relationship and creates the destination volume: It sets up the relationship, but does not start the initial transfer
244.
245.
Which statement is true about expanding an aggregate from 32-bit to 64-bit in place?
A. All aggregates are automatically converted from 32-bit to 64-bit with the Data ONTAP 8.1 upgrade.
B. The expansion is triggered by an aggr convert command.
C. The expansion is triggered by adding disks to exceed 16 TB.
D. The 32-bit aggregates are degraded and must be Volume SnapMirrored to a new 64-bit aggregates with Data ONTAP
8.1 upgrade.: The expansion is triggered by adding disks to exceed 16 TB
246.
247.
248.
Which statement is true regarding a single node cluster with Data ONTAP 8.2 or later?
A. A single node cluster is supported and can grow beyond one node.
B. A single node cluster is NOT supported
C. A single node cluster is supported but cannot grow beyond one node
D. A single node cluster is supported with 10GbE cross connects between an onboard NIC and PCIe expansion NIC.: A
single node cluster is supported but cannot grow beyond one node
249.
Which statement is true when a two node switchless cluster is grown to a four-node cluster?
A. The new HA-pair connected to two new cluster switches and the existing two-node cluster will connect one path at a
time to the new cluster switches.
B. There is a short outage while the new HA pair and existing two node cluster add additional NVRAM cards for cluster
connections.
C. The new HA pair is direct-attached to the existing two-node cluster-free 10 GbE ports without adding switches.
D. The new HA pair is connected to four new cluster switches and the existing two-node cluster will connect one path at a
time to the new cluster switches.: The new HA-pair connected to two new cluster switches and the existing two-node cluster will
connect one path at a time to the new cluster switches.
250.
251.
Which statements are true regarding backup vaults in clustered ONTAP 8.2? (Choose 2)
A. Data can only be restored to a qtree.
B. Backup vaults are at either a volume or qtree level.
C. Data can be restored to either the source volume or a new volume on the same or different clusters
D. Backup vaults are at the volume level only.
E. Compatible with 7-mode SnapVault.: Data can be restored to either the source volume or a new volume on the same or different
clusters, and backup vaults are at the volume level only
252.
253.
Which storage efficiency features are available in clustered Data ONTAP 8.2? (Choose 4)
A. Thin provisioning
B. FlexClone
C. Deduplication
D. SnapVault
E. Compression
F. SyncMirror: thin provisioning, flexclone, deduplication, compression
254.
255.
Which term is used to highlight that a storage administrator can add more than 2 storage systems to a cluster?
A. Scale up
B. Scale horizontal
C. Scale vertical
D. Scale out: scale out
256.
Which three are components of the NetApp Virtual Storage Tier (VST)?
A. Flash Accel
B. Flash Cache
C. Flash Disk
D. Flash IO
E. Flash Pool: Flash Accel, Flash Cache, Flash Pool
257.
258.
Which three network switches are supported in Data ONTAP 8.1.1 Cluster Mode?
A. Nexus 5010
B. Nexus 5020
C. CN1601
D. CN1610: Nexus 5010, Nexus 5020, CN1610
259.
Which three NFS versions does Data ONTAP 8.1 Cluster-Mode support?
A. NFSv.0
B. NFSv.1
C. NFSv.1.1
D. NFSv3.0
E. NFSv4.1
F. NFSv5.0: NFSv3.0, NFSv4.1, NFSv5.0
260.
Which three of these features were introduced in clustered Data ONTAP 8.2
A. SnapVault software for clusters
B. three-node clusters
C. eight-node scalable SAN clusters
D. Switchless-two-node clusters: SnapVault software for clusters, eight-node scalable SAN clusters, Switchless-two-node clusters
261.
Which three SMB versions do Data ONTAP Cluster Mode 8.1 and later support?
A. SMB 4.0
B. SMB 3.0
C. SMB 2.1
D. SMB 2.0
E. SMB 1.0: SMB 2.1, SMB 2.o, SMB 1.0
262.
263.
264.
Which two actions protect an Infinite volume from the loss of a namespace constituent? (Choose 2)
A. Minor the namespace constituent by using an intracluster data protection mirror
B. Mirror the namespace constituent by using an Intercluster data protection mirror
C. Mirror the namespace constituent by using a load-sharing mirror
D. Mirror the namespace constituent by using a FlexCache mirror: Mirror the namespace constituent by using an Intercluster
data protection mirror, Mirror the namespace constituent by using a load-sharing mirror
265.
Which two clustered Data ONTAP clone technologies will lock volume snapshot?
A. Vol Clone
B. LUN Clone
C. AggrClone
D. FlexClone
E. SnapClone: LUN clone, FlexClone
266.
Which two clustered interconnect switches are supported in clustered Data ONTAP 8.2?
A. Nexus 5596
B. MDS9124
C. CN5010
D. CN1610: Nexus 5596, CN1610
267.
Which two configurations are supported in clustered Data ONTAP 8.2 and later?
A. An 8-node cluster serving FCoE, ISCSI, CIFS, and NFS
B. A single-node cluster serving FC, FCoE, ISCSI and SMB 3.0
C. A 4-node cluster serving iSCSI from an Infinite Volume
D. A 16-node cluster serving FC and FCoE: An 8-node cluster serving FCoE, ISCSI, CIFS, and NFS, A single-node cluster serving FC,
FCoE, ISCSI and SMB 3.0
268.
Which two Data ONTAP Cluster-Mode clone technologies will lock a Snapshot copy? (Choose 2)
A. FlexClone
B. LUN Clone
C. Snap Clone
D. Vol Clone
E. Aggr Clone: FlexClone, LUN Clone
269.
Which two devices support the NetApp Remote Support Agent (RSA)?
A. SP
B. RTC
C. RLM
D. ILO
E. BMC: SP, RLM
270.
271.
Which two LIFs are able to failover or migrate to other nodes in the cluster?
A. cluster LIF
B. data LIF of protocol CIFS
C. data LIF of protocol FCoE
D. data LIF of protocol iSCSI
E. data LIF of protocol NFS
F. intercluster LIF
G. node management LIF: data LIF of protocol CIFS, data LIF of protocol NFS
272.
Which two methods can be used to upgrade clustered Data ONTAP 8.2 or later?
A. USB upgrades
B. Split upgrades
C. Skip generation upgrades
D. Rolling upgrades
E. Batch upgrades: Rolling upgrades, Batch upgrades
273.
274.
Which two Netapp tools perform pre-checks to determine whether a NAS environment meets the requirements for
transition from 7-mode to clustered Data ONTAP?
A. 7-mode Transition Tool
B. Clustered ONTAP transition Tool
C. Migration Checklist
D. Transition Advisor
E. Transition Deck: 7-mode transition tool, transition advisor
275.
Which two now feature are available in Data ONTAP 8.1.1 C-Mode?
A. Flash pool
B. SSD Support
C. Infinite volume
D. Infiniband: flash pool, infinite volume
276.
277.
278.
Which two statements are true with clustered Data ONTAP support of IPv6?
A. You can define multicast address
B. You can define a link-local address
C. You can define a look-back address
D. You must use a network mask of 64
E. You can define an address with 64-bit hexadecimal ID in prefix: id format: You must use a network mask of 64, You can
define an address with 64-bit hexadecimal ID in prefix: id format
279.
Which two statements are true with clustered Data ONTAP support of IPv6? (Choose 2)
A. IPv4 and IPv6 configurations are supported on the cluster management LIF
B. IPv4 and IPv6 configurations are supported on the same data LIF
C. IPv6 allows a data LIF to span more than one Vserver
D. IPv4 and IPv6 configurations are supported on the cluster interconnect: IPv4 and IPv6 configurations are supported on the
cluster management LIF, IPv4 and IPv6 configurations are supported on the same data LIF
280.
281.
Which two Vservers are created automatically by the cluster setup process?
A. Admin
B. Data
C. Management
D. Node
E. Protocol: admin, node
282.
283.
284.
Which user space utility is used to manage NFS and CIFS access?
A. secd
B. spmd
C. RDB
D. Notifyd: secd
285.
Which user space utility is used to manage other applications in the user space?
A. secd
B. RDB
C. Notifyd
D. spmd: spmd
286.
287.
Which versions of NFS are supported with clustered ONTAP 8.2 Vservers with FlexVol volumes?
A. NFSv3 only
B. NFSv2, NFSv3 and NFSv4
C. NFSv3, NFSv4 and NFSv4.1
D. NFSv2, NFSv3, NFSv4, NFSv4.1 and pNFS
E. NFSv3, NFSv4, NFSv4.1 and pNFS: NFSv3, NFSv4, NFSv4.1 and pNFS
288.
Which Vserver types are created automatically by the cluster setup process? (Choose 2)
A. Management
B. Admin
C. Protocol
D. Node
E. Data: Admin, Node
289.
With clustered data ONTAP 8.2 and later, which statement is true about deduplication and Flex Vol sizes?
A. Deduplication is supported up to half the maximum volume size for the platform
B. Deduplication is limited to 16 TB
C. Deduplication is limited to 32 TB
D. Deduplication is supported up to the maximum volume size for the platform.: deduplication is supported up to the
maximum volume size for the platform
290.
With clustered Data ONTAP 8.2 or later, an administrator may use NDMP commands at which two levels?
A. Node
B. Cluster
C. Intercluster
D. Vserver: Node, vserver
291.
With clustered Data ONTAP 8.2 or later, and administrator may use NDMP command at which two levels?
A. Node
B. Cluster
C. Intercluster
D. VServer: Node, vserver
292.
With clustered Data ONTAP 8.2 or later, which are valid values for Fractional reserve?
A. You cannot change the fractional reserve setting In clustered Data ONTAP 8.2 and later
B. 0, 25, 50, 75, or 100
C. 0, 50, or 100
D. 0 or 100
E. 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, or 100: 0 or 100
293.
With clustered Data ONTAP 8.2 or later, which SAN component will no longer be supported?
A. Windows Server 2012
B. vSphere 5.1
C. Veritas DMP
D. Red Hat Enterprise Linux 6.2
E. AIX 7.1: Veritas DMP
294.
With clustered Data ONTAP 8.2, what two non-disruptive upgrade techniques are supported on cluster of 8 nodes or
more?
A. batch
B. parallel
C. rolling
D. synchronous: batch, rolling
295.
With Data ONTAP 8.1, which statement is true about deduplication and volume sizes?
A. Deduplication is limited to 16TB.
B. Deduplication is limited to 32TB.
C. Deduplication is supported up to half the maximum volume size for the platform.
D. Deduplication is supported up to the maximum volume size for the platform.: Deduplication is supported up to the
maximum volume size for the platform.
296.
297.
Within clustered Data ONTAP 8.2 or later, which two functionalities are supported with an external asynchronous
FPolicy server?
A. Audit logging
B. Compression and decompression services
C. Encryption and decryption services
D. File Access
E. Hierarchical storage management: audit logging, file access
298.
Within clustered Data ONTAP 8.2 or later, which two types of FPolicy integrations are supported?
A. Text-based FPolicy
B. SAN-based FPolicy
C. Native Blocking
D. External FPolicy serve: SAN-based FPolicy, External FPolicy serve
299.
Within the navigation pane, what are the three stacks in system Manager's tree menu?
A. Network
B. Cluster
C. Node
D. System
E. vServer: cluster, node, vserver
300.
You create a Vserver for iSCSI LUNS. When you issue the Vserver iscsi show command it reports: "This table is
currently empty". What do you need to do to see the IQN for the vserver?
A. Create an iSCSI LIF for the vserver
B. Create a LUN in a vserver volume
C. Enable the iSCSI protocol on the vserver
D. Generate an iqn for the Vserver with the make nodename command
E. License iSCSI on the vserver: Enable the iSCSI protocol on the vserver