Professional Documents
Culture Documents
Orientation board
I.
Pedestal
INTRODUCTION
A. Composed
The electronic needle selecting machine is composed of
up and down needle selecting piece, piezoelectric ceramics,
978-0-7695-3729-0/09 $25.00 2009 IEEE
DOI 10.1109/SSME.2009.58
104
Piezoelectric ceramics
Piezoelectric
ceramics body
l ti
Electrode board
L1
L2
Power line
(a) Principle of piezoelectric ceramics
Orientation end
Orientation point
Swing ends
Heel
Original cam
Jacquard piece
Needle selecting
gear
105
Upper
Loop accumutional
Needle selecting
gear
IV.
CONCLUSIONS
A. Loop Formation
When the upper and down needle selecting pieces do not
swing in Figure 5, the heel of jack moves up to the max
point( the point 1 of Figure 6) along the slant of jack cam.
The moving graph of needle is shown as A, B, C, D, E and F
in Figure 6. The needle moves up to the height of loop
formation at jack cam synchronously. Therefore, loop
formation is finished.
B. Float Adjustment Loop
The upper needle selecting pieces do not swing. But the
down needle selecting pieces swing in Figure 5. The heel of
jack in Figure 4 moves up to the point 3 of Figure 6. It drops
out from jack cam. The moving graph of needle is shown as
A and B in Figure 6. The needle does not move up. Then the
[3]
[4]
[5]
[6]
106