Professional Documents
Culture Documents
An understanding of the earths interior is essential to follow the nature of changes going on
over the earths surface which are related to the deep laid internal forces operating from within
the earth. This understating of the earths interior is based mainly on indirect sources, because so
far it has not been possible to have access to the inner levels of the earths structure.
Direct Sources
1. DEEP DRILLING IN SEARCH OF OIL.
2. VOLCANIC ERUPTIONS - The recurrent volcanic eruptions throwing out extremely
hot, molten material from the earths interior and the existence of hot springs,
geysers etc. point to an interior which is very hot. They serve as windows giving
information about the outer 200 kms of the earths interior.
Indirect Sources
1. EVIDENCE FROM THE METEORITES - The meteorites are solid bodies freely traveling in
space which accidentally come under the sphere of influences of the earths gravity
and as a result fall on earth (or collide with it). Their outer layer is burnt during their
fall due to extreme friction and the inner core is exposed. Earths average density of
5.5 grams per cubic centimeter (g/cm3) is similar to the average density of meteorites,
which supports the idea that planet Earth is itself composed of meteoritic material.
Furthermore, the heavy material composition of their cores confirms the similar
composition of the inner core of the earth, as both evolved from the same star
system in the remote past.
2. STUDY OF SEISMIC WAVES One way scientists learn about Earth's interior is by looking
at seismic waves. Seismic waves travel outward in all directions from where the ground
breaks at an earthquake. By studying their path movement x-ray like pictures of the
earths interior can be obtained.
3. HIGH PRESSURE-TEMPERATURE LABORATORY EXPERIMENTS The interior of the earth
can be determined by analyzing seismic wave propagation utilizing their large density
differences. However, this analysis requires information about the structures and
properties of Earth's layers, and consequently, the rocks (minerals) that constitute the
layers must be investigated. Currently the drilling depth is limited to only ~10 km, which
is extremely small compared to Earth's radius of ~6,400 km. Therefore, high-pressure,
high-temperature experiments that artificially reproduce the conditions of Earth's
interior are very useful in these investigations. In high-pressure, high-temperature
experiments, experimental samples are encapsulated in high-pressure cells covered by
heaters and a pressurizing medium.
The first two wave types, P and S , are called body waves because they travel or propagate through the
body of Earth. The surface waves travel along Earth's surface and their amplitude decreases with depth
into Earth. The body waves give us information about the earths interior.
Compressional or P-Waves
P-waves are the first waves to arrive because they travel the fastest. They typically travel at speeds
between ~1 and ~14 km/sec. The slower values corresponds to a P-wave traveling in water, the higher
number represents the P-wave speed near the base of Earth's mantle. P-waves are sound waves whose
velocity depends on the elastic properties and density of a material.
S-Waves
Secondary , or S waves, travel slower than P waves and are also called "shear" waves because they don't
change the volume of the material through which they propagate, they shear it. S-waves are transverse
waves because they vibrate the ground in a the direction "transverse", or perpendicular, to the direction
that the wave is traveling.
The S-wave speed, call it b, depends on the shear modulus and the density. Typical S-wave propagation
speeds are on the order of 1 to 8 km/sec. The lower value corresponds to the wave speed in loose,
unconsolidated sediment, the higher value is near the base of Earth's mantle. An important
distinguishing characteristic of an S-wave is its inability to propagate through a fluid or a gas because a
fluids and gasses cannot transmit a shear stress and S-waves are waves that shear the material.
Seismic Wave Propagation
The fact that the waves travel at speeds which depend on the material properties (elastic moduli and
density) allows us to use seismic wave observations to investigate the interior structure of the planet.
We can look at the travel times, or the travel times and the amplitudes of waves to infer the existence of
features within the planet, and this is a active area of seismological research. To understand how we
"see" into Earth using vibrations, we must study how waves interact with the rocks that make up
Earth.Several types of interaction between waves and the subsurface geology (i.e. the rocks) are
commonly observable on seismograms
Refraction
Reflection
When waves reach a boundary between different rock types, part of the energy is
transmitted across the boundary. The transmitted wave travels in a different direction which
depends on the ratio of velocities of the two rock types. Part of the energy is also reflected
backwards into the region with Rock Type 1, but I haven't shown that on this diagram.
Refraction has an important affect on waves that travel through Earth. In general, the seismic velocity in
Earth increases with depth (there are some important exceptions to this trend) and refraction of waves
causes the path followed by body waves to curve upward.
The overall increase in seismic wave speed with depth into Earth
produces an upward curvature to rays that pass through the mantle. A
notable exception is caused by the decrease in velocity from the
mantle to the core. This speed decrease bends waves backwards and
creates a "P-wave Shadow Zone" between about 100 and 140 distance
(1 = 111.19 km).
The second wave interaction with variations in rock type is reflection. A seismic reflection occurs when a
wave impinges on a change in rock type (which usually is accompanied by a change in seismic wave
speed). Part of the energy carried by the incident wave is transmitted through the material (that's the
refracted wave described above) and part is reflected back into the medium that contained the incident
wave.
The amplitude of the reflection depends strongly on the angle that the incidence wave makes with the
boundary and the contrast in material properties across the boundary. For some angles all the energy
can be returned into the medium containing the incident wave.
The actual interaction between a seismic wave and a contrast in rock properties is more complicated
because an incident P wave generates transmitted and reflected P- and S-waves and so five waves are
involved. Likewise, when an S-wave interacts with a boundary in rock properties, it too generates
reflected and refracted P- and S-waves.
Core
CORE lies between 2900 km to 6400 km below the earths surface and accounts for 83 per cent
of the earths volume. The central core has the heaviest mineral of highest density. It is
composed of nickel and iron (ferrous)and is, therefore, called nife, while a zone of mixed
heavy metals + silicates separated the core from outer layers. (see class notes for further elaboration)