Professional Documents
Culture Documents
As the industry leader for more than five decades, Bacou-Dalloz ™ provides a
comprehensive line of Miller ® brand fall protection products and related services.
Quality Manufacturing
• Our facility in Franklin, PA has been designated the fall protection
Center of Operational Excellence in the Americas, complementing
our global manufacturing network in Hof, Germany, Vierzon, France
and Melbourne, Australia
• The Franklin facility is ISO 9001:2000 certified — proving international
recognition of our overall design and manufacturing processes.
Product Innovation
New product innovations and industry firsts:
A
11 HP (High Performance) Harnesses
12 Non-Stretch Harnesses;
High-Visibility Vests; Harness Accessories Anchorage/
13 Relief Step Safety Device; Rescue Ladder Anchorage Connector
Utility Products Anchorage: Commonly referred to
14 DuraFlex Utility Harnesses; as a tie-off point (Ex: I-beam)
StopFall System; Safety Straps
Anchorage Connector: Used to join
15 Linemen’s Belts; Rescue Ladder;
the connecting device to the
SideWinder Retractable Lanyard anchorage (Ex: cross-arm strap)
B
Connecting Devices
16 Manyard II & Manyard HP Lanyards
17 Manyard & StretchStop/SofStop Lanyards Body
18 HP Lanyards with SofStops; Wear
Lanyards with SofStops
19 BackBiter Tie-Back Lanyards; Retractable Body Wear:
Web Lanyards; O-Ring Extension Option The personal protective
20 Scorpion Personal Fall Limiters equipment worn by
the worker (Ex: full-body
21 Black Rhino Self-Retracting Lifelines
harness)
22 MiniLite Fall Limiters; Cab Mount Brackets
23 Falcon Self-Retracting Lifelines
24 MightyLite Self-Retracting Lifelines
25 Welding Products
26 Positioning & Restraint Lanyards;
Positioning Assemblies
C
27 Rope Grabs; Vertical Lifelines
Anchorage Connectors
28 Grip Anchorage Connectors
29 Temporary Anchorage Connectors Connecting
30 Permanent Anchorage Connectors Device
31 Edge Fall Protection System;
Shadow Beam Anchors Connecting Device:
The critical link which
Roofing Products
joins the body wear
32 Roof Systems to the anchorage/
Temporary Lifelines anchorage connector
34 SkyWalker Temporary Horizontal Lifelines (Ex: shock-absorbing
35 SkyWalker Wire Rope Lifeline Kits; lanyard (shown), or
Temporary Horizontal Lifeline Systems retractable lifeline)
Permanent Lifelines
36 Söll Xenon System; Söll GlideLoc Systems
37 TranScendor System; Söll PivotLoc System
Confined Space Individually these
38 MightEvac Self-Retracting Lifelines; components will not
ManHandler Hoist/Winch provide protection from a
New! DuraHoist Confined Space Systems fall. However, when used
39 Tripod; Davit Mounting System; Quad Pod properly and in conjunction
Rescue/Descent Systems with each other, they form
40 Universal Rescue System; a Personal Fall Arrest System
Descent Device; SafEscape System that becomes vitally important
41 Miller/Troll Training for safety on the jobsite.
42 Regulations & Standards
43 Fall Clearance Requirements; Miller Technical Support
Tool Lanyards
800/873-5242 3
www.millerfallprotection.com
Personal Fall Arrest System Selections
Iron Anchorage:
Painting Anchorage:
Shadow Beam Anchor (8816-14)
Working • Adjustable beam anchor
See pg. 31 Cross-Arm Anchorage Connector Strap
(8183/6FTGN)
• Fits flange sizes 3" to 14" See pg. 29
• 6 ft. web strap
• Lightweight, high-strength
aluminum construction Body Wear:
11
Body Wear: HP Harness (650T/UGN) See pg.
11 • Non-stretch webbing
HP Harness (650T61/UGN) See pg. • Friction buckle shoulder straps;
• Non-stretch webbing mating buckle leg straps
• Friction buckle shoulder straps;
tongue buckle leg straps Connecting Device:
• Attached back pad w/side D-rings Black Rhino™ Self-Retracting Lifeline
for positioning; adjustable shoulder (CFL-4/9FT)
See pg. 21
pads; removable waist belt • 9 ft. stainless steel wire rope
Connecting Device: lifeline arrests free falls
• Quick-activating, high-strength
Lanyard w/Double Shock-Absorber stainless steel braking system
Pack (940WLS/6FTGN) See pg. 31 • Repairable; no annual factory
• 6 ft. web lanyard w/double recertification required
SofStop shock-absorber pack
for 12 ft. free fall
Positioning Device:
See pg. 26
Chain Assembly (6756RS)
• 13-link chain positioning assembly
Miller Shadow ® • Swivel attachment; length adjuster
Beam Anchor
HP ™ Harness
Anchorage: Anchorage:
Drilling Rig Concrete Grip Anchorage Connector (496) See pg. 28
Cross-Arm Anchorage Connector Strap
(8183/6FTGN)
See pg. 29
Forming • Portable/reusable concrete anchorage
• 6 ft. web strap connector
Body Wear: • Designed for single user
Oil Rig "Belly Buster" Harness/Saddle Body Wear:
Seat Combination (000217) DuraFlex Stretchable Harness
• Non-stretch webbing harness (NON-STOCK: E650-61/UGN)
• Tongue buckle leg straps; permanently- • Stretchable webbing
attached waist belt w/2 built-in, • Friction buckle shoulder straps; tongue
triple-action, auto-lock carabiners for buckle leg straps
rope positioning attachment • Attached 6-inch back pad w/side D-rings
• Built-in saddle seat for raising/lowering for positioning; adjustable shoulder pads;
Connecting Device: removable waist belt
MightyLite Self-Retracting Lifeline Connecting Device:
(RL175SS/175FT) See pg. 24 Black Rhino Self-Retracting Lifeline (CFL-4/9FT)
• 175 ft., 3/16" stainless steel • 9 ft. stainless steel wire rope
See pg. 21
wire rope lifeline arrests free falls
• Corrosion-resistant stainless • Quick-activating, high-strength stainless
steel & aluminum components steel braking system
• Sealed braking system; built-in, • Repairable; no annual factory recertification
heavy-duty handle
Positioning Device:
pg. 26
Positioning Assembly (6756RS) See
• 13-link chain positioning assembly
• Swivel attachment; length adjuster
4
Anchorage: Food Anchorage:
Industrial Cross-Arm Anchorage Connector Strap Cross-Arm Anchorage Connector Strap
(8183/6FTGN)
Processing (8183/6FTGN)
See pg. 29 See pg. 29
• 6 ft. web strap • 6 ft. web strap
Body Wear: Body Wear:
DuraFlex® Stretchable Harness DuraFlex Python® Ultra Harness
(E650-4/UGN) See pg. 9 (P950QC/UGN) See pg. 7
• Stretchable webbing • Cushioned and stretchable
• Tongue buckle leg straps webbing
Connecting Device: • Quick-connect buckles on the
chest & leg straps
Scorpion Personal Fall Limiter
See pg. 20
• Comfort-touch back D-ring pad
(PFL-4/9FT)
• 9 ft. retractable web lanyard Connecting Device:
arrests free falls Black Rhino Self-Retracting Lifeline
• Dual operation versatility: attach to (CFL-4/9FT) See pg. 21
harness as personal fall limiter or • 9 ft. stainless steel wire rope
use as traditional retractable lifeline lifeline arrests free falls
• Quick-activating, high-strength • Quick-activating, high-strength
stainless steel braking system stainless steel braking system
• Repairable; no annual factory
recertification required
Miller MiniLite ®
Cab Mount Bracket
DuraFlex ® Harness
Sliding Back D-Ring Pull-Free Lanyard Rings Front D-Ring Side D-Rings Shoulder D-Rings
Sliding back D-ring with Allows user to attach lanyard Used for a variety of Most commonly used for Primarily used for lifting and
injection-molded, flexible when not in use. Minimizes climbing, confined space work positioning. lowering individuals, such
Santoprene® D-ring pad. hazards associated with the and rescue applications. as in confined space and
Comfort-touch back lanyard hanging freely. rescue applications.
D-ring pad (inset) provides
added comfort.
Friction Buckle Mating Buckle Tongue Buckle Quick-Connect Buckle Relief Step™ Safety
To adjust the friction buckle, To connect the mating The tongue buckle works Quick-Connect Buckles for Device
simply pass the webbing buckle, push the center bar similar to a belt buckle. chest and leg straps interlock Small and lightweight; the
over the knurled bar and buckle completely through Insert the loose strap of similar to a seat belt for easy Relief Step Safety Device
back down between the the square link and allow it webbing through the donning and feature a dual- attaches to any brand
knurled bar and frame. Pull to fall into place. Pull web tongue buckle placing the tab release mechanism to full-body harness.
web end to tighten. end to tighten. buckle tongue through the prevent accidental opening.
appropriate grommet hole.
Push remaining webbing
through the keeper.
Optional Padding
Model No. Standard Features Special Features*
RIA-P1 Shoulder/Leg Pads (2 pack)
RDF-QC/U Quick-Connect Buckle Legs
• Quick-Connect RIA-P2 Seat Pad
RDF-TB/U Chest Buckles Tongue Buckle Legs
RDF-QC-B/U • Cam Buckles Removable Belt, Quick-Connect Buckle Legs Connection Points
• ErgoArmor
RDF-TB-B/U Removable Belt, Tongue Buckle Legs RIA-C1 Sliding Belt Accessory Connectors (3 pack)
Back Shield
RDF-QC-DP/U • Stand-Up D-Ring Side D-Rings & Pad, Quick-Connect Buckle Legs RIA-C2 Universal Accessory & Belt Attachment Clip (2 pack)
• Self-Contained
RDF-TB-DP/U Side D-Rings & Pad, Tongue Buckle Legs Belts (Fits sizes 32" to 54")
Label Pack
RDF-QC-BDP/U • Web Finials Removable Belt, Side D-Rings & Pad, Quick-Connect Buckle Legs RIA-B1 Belt with PivotLink Attachments, 5 Accessory Connectors
RDF-TB-BDP/U Removable Belt, Side D-Rings & Pad, Tongue Buckle Legs RIA-B2 Belt w/pad and PivotLink Attachments, 5 Accessory Connectors
This equipment should only be used in conjunction with the manufacturer’s instructions. Failure to follow instructions could result in serious injury or fatality.
Ultimate Comfort,
Fit and Safety
A new premier line of Miller ® brand harnesses. Easy-to-wear, the new Miller Ultra RA D TTO
ATTEED
O
R
s.
harnesses provide greater comfort and increased mobility, while improving safety 40(1(108811.4.4lkkbgg))
IT Y Y
and reducing worker fatigue. ACCIT
APPA
CCA
Sleek Quick-Connect Comfort-Touch
Buckles for chest and Back D-Ring Pad
leg straps, interlock is designed with a
similar to a seat belt, specially-woven,
for easy donning and breathable fabric
feature a dual-tab that provides greater
release mechanism comfort; orients
to prevent accidental harness for quick
opening. tangle-free donning.
The DuraFlex Python Ultra Harness The new line of Ultra Harnesses is
features cushioned tubular webbing in designed with patented DuraFlex
the shoulder straps to minimize possible stretchable webbing that provides
discomfort around the neck and shoulders greater comfort, increases productivity
when required to wear a tool belt. and improves safety.
Patented
High-strength, stretchable Bright, highly-visible
abrasion-resistant elastomer design
webbing for comfort
Tough
Contoured Durable, interwoven
edge improves high-density, webbing
comfort water-repellent foam
fety
tep™ Sa
Relief S lps Prevent
He
Device ion Trauma!
Suspens details)
rd
ge 13 fo
(See pa
#P950QC-77/UGN #E650QC-7/UGN
Green Blue Green Blue
Webbing Webbing Webbing Webbing
for greater for greater
chemical resistance chemical resistance
D TTO
ATTEED
O
The DuraFlex Python Harness features RA
R
s.
wraparound comfort and is uniquely 40(1(108811.4.4lkkbgg))
IT Y Y
ACCIT
APPA
CCA
constructed with three types of
performance webbing.
3
greater flexibility, mobility and less fatigue.
Non-stretch webbing leg straps
Comfort
Non-stretch nylon webbing is lightweight and durable.
fety
tep™ Sa
Relief S lps Prevent • High-strength, abrasion-resistant, cushioned
H e
Device ion Trauma! tubular webbing
Suspens 13 for details)
1
ge • Webbing has a contoured edge for improved comfort,
(See pa
and encases durable, high-density, water-repellent foam Green Blue
Cushioned • The Python harness is tangle-free, holds its shape for Webbing Webbing
for greater
Tubular easier donning chemical resistance
Webbing
• Back strap prevents user from falling out of the harness
• Injection-molded Santoprene® D-ring back pad is soft HARNESS SIZING CHART
and flexible enhancing comfort
DuraFlex • Available in green webbing or blue webbing for
Stretchable
greater chemical resistance
Webbing
• Pull-free lanyard rings allow user to attach lanyard
Lightweight
Non-stretch
when not in use
Webbing
#P950-7/UGN
8
®
Fe el th e
Miller DuraFlex Harnesses feature specially-formulated
elastomer webbing that stretches to provide:
Patented
stretchable
elastomer for comfort
D if feren c e! H
tep™ Sa
e
fety
Relief S lps Prevent
Device ion Trauma!
Suspens 13 for details)
Greater Comfort RA D TTO
ATTEED
O
(See pa
e
ge
R
s.
DuraFlex Harnesses conform to the
shape of the worker, stretching with
40(1(108811.4.4lkkbgg))
IT Y Y
ACCIT
APPA
CCA
every movement, so there is no bunching,
binding or kinking. • Synthetic elastomer webbing
stretches with the worker for maximum comfort
Improved Safety • Bright, stylish designs are readily visible from a distance
• Solid-colored leg straps help the wearer orient the
With comfort unsurpassed, DuraFlex harness for ease of donning
Harnesses offer wider end-user acceptance.
And, a comfortable harness is worn • Back strap prevents user from falling out of the harness
properly, enhancing compliance and safety • Pull-free lanyard rings allow user to attach lanyard
on the jobsite. when not in use
• Available in green webbing or
Increased Productivity blue webbing for greater
chemical resistance
Because DuraFlex Harnesses are
stretchable, the worker has greater mobility #E650-4/UGN
with less fatigue.
Shoulder Leg Chest Sub-
Back Front Side Strap Strap Strap Pelvic
Model Sizes D-Ring D-Ring D-Rings Buckles Buckles Buckle Strap Special Features
DuraFlex Series 650
E650/UGN U Yes Option No Friction Mating Mating Yes Pull-free lanyard rings / Belt loops
E650-4/UGN U Yes Option No Friction Tongue Mating Yes Pull-free lanyard rings / Belt loops
E650-7/UGN U Yes Option Yes Friction Mating Mating Yes Pull-free lanyard rings / Belt loops
E650-58/UGN U Yes Option Yes Friction Tongue Mating Yes Pull-free lanyard rings / Belt loops
DuraFlex Construction Harness
E650-77/UGN U Yes Option Yes Friction Tongue Mating Yes Permanently-attached back pad
#TF4000/U
Model Description
2NA Body belt with tongue buckle, includes side D-rings and 3" (76mm) back pad
3NA Body belt with tongue buckle, includes single D-ring and 3" (76mm) back pad
123N Lined body belt with tongue buckle, includes single D-ring
124N Lined body belt with tongue buckle, includes side D-rings
Body Belt Sizing
When ordering, indicate size by using the following suffixes:
For Small: 32" - 40" (813 - 1016mm), add “/SBK” (Ex.: 2NA/SBK)
Medium: 36" - 44" (914 - 1117mm), add “/MBK”
Large: 42" - 48" (1067 - 1219mm), add “/LBK”
X-Large: 44" - 52" (1117 - 1320mm), add “/XLBK”
XX-Large: add “/XXLBK”
Note: XX-Small and X-Small sizes available upon request.
10
™
• Bright colors make the HP harnesses readily visible and easy to inspect
• Available in green webbing or blue webbing for greater chemical resistance #650T4/UGK
fety
tep™ Sa
Relief S lps Prevent
He
Device ion Trauma!
Suspens 13 for details)
e
ge
(See pa
#650T/UGK #850T/UGK
#552T/UGK
The Miller High Viz Vest is designed for use with, or without, a Miller full-body
harness. Available in lime yellow, the vest meets the Department of Transportation
(DOT) requirements and the ANSI Class 3 High-Visibility Standard.
• Removable harness design provides flexibility for a variety of applications
• Vest and harness sold separately reducing costs when either component
is damaged or needs replacement
Model Description
HIVIZVEST Specify size: /M; /L; /XL; /XXL
#HIVIZVEST
Helps Prevent
Suspension Trauma !
The Miller Relief Step Safety Device alleviates the effects of orthostatic intolerance,
also known as suspension trauma. If a fall occurs, a person becomes suspended in a
harness and remains both vertical and sedentary for a period
of time, causing blood to “pool” in the veins of the legs.
Subsequently, blood is restricted to the brain and other major
organs that may initially result in unconsciousness. If not
rescued promptly, serious injury or death may occur. The
Miller Relief Step is designed to provide a short-term solution
for alleviating suspension trauma.
• OSHA states that potentially fatal suspension trauma can occur
within minutes while waiting for rescue after a fall
• Average fall rescue time is 15 minutes
• When used, the Relief Step Safety Device provides support and enhances blood circulation
until rescue – permitting the ability to move and flex leg muscles
• Small and lightweight; the Relief Step Safety Device attaches to any brand full-body harness
• Utilizing two (2) Relief Steps (one for each leg/foot) assures greater comfort until rescue
is completed
Model Description
9099X/12 Consists of a box of 12 Relief Step Safety Devices
9099/36BULK 36 Relief Step Safety Devices in bulk quantity
Pull tab to deploy Insert foot into loop Ability to stand Two Relief Steps
step and adjust allowing improved provide added support,
circulation balance and comfort
The Miller Aerial Lift Rescue Ladder is a portable 15-foot (4.6m) nylon web ladder
designed and intended to assist with self-rescue for applications such
as aerial lifts, bucket trucks and elevated work surfaces.
In the event of a fall, the user releases the ladder by pulling on the
drawstring and then climbs back to the work surface.
Miller Utility Harnesses minimize the amount of hardware above the waist to
reduce electrical conductivity. In addition, the harnesses are independently
thermal-arc tested to ensure superior performance.
ll The Miller StopFall System provides a user-friendly and reliable work positioning and fall arrest
StopFa system for climbing wooden poles. The StopFall System is specifically designed with a 75-inch
V id eo (1905mm) pole strap (maximum length) and features a 21-inch (533mm) security strap with unique
le
Availab
gaffs that “bite” into wooden poles. Meets CSA Standard Z259.14-99 for Type A and Type AB.
Model 7600A StopFall System fits wood pole size 25" - 50" (635mm - 1270mm) circumference with
friction buckle adjustment.
Model 7600B StopFall System fits wood pole size 25" - 50" (635mm - 1270mm) circumference with
tongue buckle adjustment.
Specially-designed security strap
The polyester pole strap comprises:
• An integral steel reinforcement band, which prevents • Corrosion-resistant, stainless steel hardware
“hour-glassing” and maintains shape • Spring-loaded gaffs that provide instant grip
Linemen’s Belt on wooden poles
#93N • A rugged neoprene wear pad for increased service life
• Double-locking snap hooks and length adjuster assembly • Nylon rollers permit free movement of the
gaffs and minimize abrasion on the strap
• Two-piece spring assembly to prevent a continual
Utility Harness electric path • A disconnect and length adjuster with a
#E752/UGN “parking” feature for when the security strap
• Stainless steel dome stops to prevent the security strap
is not in use
from inadvertently sliding off the end of the wear pad
Miller brand safety straps are #6NFLS/6FTYL NF Series Safety Strap YR Series Safety Strap
equipped with locking snap hooks A 1-3/4 inch (44mm) wide, 100% nylon Strong safety strap, made of a
and are constructed with a red safety strap offers a friction buckle six-ply nylon, remains flexible in all
inner core/wear indicator. to adjust the length of the strap types of weather conditions. Tongue
Should the red core become quickly and easily. buckle adjuster included for quick,
exposed, the strap must be Model 6NFLS/6FTYL - 6 ft. (1.8m) length safe adjustment.
removed from service. #6YRLS/6FTBR Model 7NFLS/7FTYL - 7 ft. (2.1m) length Model 6YRLS/6FTBR - 6 ft. (1.8m) length
Model 7YRLS/7FTBR - 7 ft. (2.1m) length
14
Miller Linemen’s Belts combine superior design
characteristics and handmade craftsmanship to
create products of the highest quality every time.
#8449
All Miller Linemen’s Belts feature:
#75N
• Side positioning D-rings • Support belt rings
• Leather tool loops • Tape thong
• Accessory snap • Accessory ring
Fixed Belts
Fixed belts do not allow for lateral movement of the
D-rings or waist strap with tool loops.
#93N
Semi-Floating Belts
#60NL
On semi-floating belts, the waist strap with tool loops is
#94N
completely separate from the D-saddle, allowing for lateral
movement of the waist strap prior to use. Any load or pull
does not bind tools to tool loops.
Full-Floating Belts
Full-floating belts allow for lateral movement of the D-saddle
with D-rings during use. As a lineman changes position on a
pole, the D-rings easily adjust to the movement. As a result,
the pole strap rubs against the pole less frequently and receives
less wear. Any load or pull does not bind tools to the tool loops. #95N
#88N
a rd
Harness
Contracts 6 ft. [1.8m] to 4 ft. [1.2m], Manyard II Lanyards greatly
reduce the chances of tripping, snagging or dragging.
T r ippin g H a z #E650/UGN
#231M/6FTGN
231M/6FTGN Webbing Two Locking snap hook Locking rebar hooks Warning flag / Red core wear indicator 6' (1.8m)
232M/6FTGN Webbing Two Locking snap hook Locking snap hooks Warning flag / Red core wear indicator 6' (1.8m)
233M/6FTGN Webbing One Choke-off loop Locking snap hook Warning flag / Red core wear indicator 6' (1.8m) Blue
Webbing
*Available in lengths from 4 ft. (1.2m) to 10 ft. (3m). For greater chemical-resistant blue webbing, substitute “BL” for “GN” in the suffix of the corresponding lanyard model number (Ex: 216M/6FTBL). for greater
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening; Locking Rebar Hook – 2-1/2 inch (63mm) gate opening. chemical resistance
16
Manyard ® Shock-Absorbing Lanyards
#216WLS/6FTYL
With 20 years of design refinement, the “original”
Manyard Shock-Absorbing Lanyards are
unsurpassed in the market for safety,
comfort and mobility.
• Specially-woven, shock-absorbing inner core
smoothly expands up to 42 inches (1.1m) to
#216WLS/6FTYL
Reduces Fall
reduce fall arrest forces
• Heavy-duty tubular outer jacket serves Arrest Forces DuraFlex®
Harness
#E650-77/UGN
as a back-up lanyard
• Unique warning flag provides visual proof
that a lanyard has been involved in a fall
and must be removed from service
#232WLS/6FTYL
#913SS/6FTGN
#901RLS-2/6FTWH
#928LS/18INYL #901RLS-2/
#907NLS/6FTYL 6FTWH
Miller BackBiter offers the ultimate in tie-back safety! The webbing and snap
hooks of regular lanyards are not designed to withstand the rigors of tying back.
The innovative Miller BackBiter Tie-Back Lanyard with a 5K Snap Hook was
designed from top to bottom for tie-back use.
• All-in-one lanyard with SofStop Shock Absorber and
cross-arm anchorage connector
Tie- B ac k
Safely!
• First snap hook with a 5,000 lb. (22kn) gate load
capacity from any angle
• Heavy-duty polyester webbing and
Cordura® nylon webbing with five times
more abrasion resistance
#913B/6FTGN
• Available in green webbing or
blue webbing for greater
chemical resistance
Featuring the
Miller 5K ®
SNAP HOOK
The FIRST snap hook with a 5,000 lb.
gate load capacity from any angle
#913B/6FTGN
know
Always istance
u r fa ll d
yo er
ct prop
and sele t to meet
m e n
equip clearance.
the fall
tailils)
eta s)
forr dde
agee 4433 fo
#8798B/6FTGN (Seeee ppag
(S
connectors available
Model ■ Scorpion Unit Connector Options ■ Scorpion Lanyard End Connector Options
• 400 lbs. (181.4kg) capacity models
available upon request PFL-1/9FT Scorpion without unit connector Locking snap hook
• No annual factory recertification PFL-2/9FT Scorpion w/steel twist-lock carabiner Locking snap hook
required PFL-3/9FT Scorpion w/stainless steel swivel shackle Locking snap hook
• Visual load indicator – indicates PFL-4/9FT Scorpion w/carabiner and swivel shackle Locking snap hook
the unit must be removed PFL-5/9FT Scorpion w/D-ring swivel hook Locking snap hook
from service
PFL-6/9FT Scorpion w/rebar hook and swivel shackle Locking snap hook
PFL-7/9FT Scorpion w/locking snap hook and swivel shackle Locking snap hook
PFL-8/9FT Scorpion w/captive eye carabiner Locking snap hook
PFL-9/9FT Scorpion w/carabiner and swivel shackle Locking rebar hook
PFL-10/9FT Scorpion w/D-ring swivel hook Locking rebar hook
PFL-11/9FT Scorpion w/locking snap hook and swivel shackle Locking rebar hook
PFL-12/9FT Scorpion w/carabiner and swivel shackle Locking, rebar swivel hook
PFL-13/9FT Scorpion w/D-ring swivel hook Locking, rebar swivel hook
Python Harness
#P950/UGN PFL-14/9FT Scorpion w/locking snap hook and swivel shackle Locking, rebar swivel hook
PFL-15/9FT Scorpion without unit connector Locking, swivel snap hook
PFL-16/9FT Scorpion w/steel twist-lock carabiner Locking, swivel snap hook
PFL-17/9FT Scorpion without unit connector Web loop for carabiner
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening; Locking Rebar Hook – 2-1/2 inch (63mm) gate opening.
■ Without ■ Steel ■ Stainless ■ Carabiner ■ D-ring ■ Rebar hook ■ Locking snap ■ Captive eye
connector twist-lock steel swivel and swivel swivel hook and swivel hook and carabiner
carabiner shackle shackle shackle swivel shackle
Shock-Absorbing
Lanyard End Connector
Lanyard
Black Rhino SRL
Unit Connector
Standard
Model Unit Connector Option Lanyard End Connector Options Length
CFL-1/9FT None (need carabiner, not included) Locking, swivel snap hook with load indicator 9' (2.7m)
CFL-2/9FT Steel twist-lock carabiner Locking, swivel snap hook with load indicator 9' (2.7m)
CFL-3/9FT Stainless steel swivel (need carabiner, not included) Locking, swivel snap hook with load indicator 9' (2.7m)
CFL-4/9FT Stainless steel swivel and steel twist-lock carabiner Locking, swivel snap hook with load indicator 9' (2.7m)
CFL-5/9FT Stainless steel swivel and rebar locking snap hook Locking, swivel snap hook with load indicator 9' (2.7m)
CFL-6/9FT Stainless steel swivel and steel twist-lock carabiner Locking rebar snap hook 9' (2.7m)
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening; Locking Rebar Hook – 2-1/2 inch (63mm) gate opening.
Arrests
• No annual factory recertification required
• High-impact protective outer cover; visual load indicator
Free Falls
• Available with a variety of integral anchorage connectors
• Rated to 400 lbs. (181.4kg) capacity when using a SofStop
shock absorber (928LS/18INYL)
DuraFlex® Harness
#E650/UGN
FL11-3/11FT MiniLite with carabiner and swivel shackle FL11-10/11FT MiniLite with swivel shackle (FL11-2) and no snap
hook on the web lanyard end
FL11-4/11FT MiniLite with attached 3' (1m) cross-arm strap*
FL11-11/11FT MiniLite (FL11-6) with rebar hook on web lanyard end
FL11-5/11FT MiniLite with locking rebar hook
FL11-12/11FT MiniLite with attached captive-eye carabiner
FL11-6/11FT MiniLite with rebar hook swivel shackle
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening;
*Additional lengths available. Locking Rebar Hook – 2-1/2 inch (63mm) gate opening.
22
Miller Falcon™ Self-Retracting Lifelines
Nearly indestructible, the high impact-resistant nylon housing withstands the harsh
SELF-RETRACTING LIFELINE
rigors of the toughest applications. The lightest, most rugged line of composite
retractables are designed with smooth, round edges to increase durability.
Pound for pound the strongest, most durable retractable. Lifeline available
in 20- (6m) , 30- (10m), 50- (15m) and 65-ft. (20m) lengths.
• Corrosion-resistant stainless steel and aluminum internal components extend service
life and reduce replacement costs
• Lightest composite unit on the market – easy to handle and transport to/from jobsites
• Unique side payout design reduces wear on the entry guide bushing and cable
for smooth operation with less drag
• Smooth, quiet operation; engineered spring retraction tension designed
not to pull or drag on a worker to improve productivity and reduce fatigue
• Built-in, ergonomically-designed molded handle on the 50- (15m) and
65-ft. (20m) units provide support and leverage when attaching to
anchorage connector. Easier to install.
• Dual swivels (unit top and snap hook) included on all
models to minimize lifeline from twisting during use
• New and improved load indicator on the snap #MP50G/50FT
hook identifies when the unit needs to be
removed from service
• No annual factory recertification
required* – lowers cost of ownership #MP65G/65FT
and increases productivity
#MP20G/20FT
*Except in Canada where the Canadian
Standards Association requires annual
factory recertification.
ua r an tee ! ™
G sed und
er
(When u conditions.)
DuraFlex® Harness working
#E650-77/UGN typical
MP20SS/20FT Miller Falcon 20' (6m) stainless steel wire rope (3/16" [5mm]) 8.9 lbs. (4.0kg) 10" x 8.4" x 4"
with tagline and carabiner (255mm x 213mm x 101mm)
MP30G/30FT Miller Falcon 30' (10m) galvanized wire rope (3/16" [5mm]) 10.7 lbs. (4.8kg) 10" x 8.4" x 4"
with tagline and carabiner (255mm x 213mm x 101mm)
MP30SS/30FT Miller Falcon 30' (10m) stainless steel wire rope (3/16" [5mm]) 10.7 lbs. (4.8kg) 10" x 8.4" x 4"
with tagline and carabiner (255mm x 213mm x 101mm)
MP50G/50FT Miller Falcon 50' (15m) galvanized wire rope (3/16" [5mm]) 14.8 lbs. (6.7kg) 13.5" x 9.7" x 4"
with tagline and carabiner (342mm x 246mm x 101mm)
MP50SS/50FT Miller Falcon 50' (15m) stainless steel rope (3/16" [5mm]) 14.8 lbs. (6.7kg) 13.5" x 9.7" x 4"
with tagline and carabiner (342mm x 246mm x 101mm)
MP65G/65FT Miller Falcon 65' (20m) galvanized wire rope (3/16" [5mm]) 17.1 lbs. (7.7kg) 13.5" x 9.7" x 4"
with tagline and carabiner (342mm x 246mm x 101mm)
MP65SS/65FT Miller Falcon 65' (20m) stainless steel rope (3/16" [5mm]) 17.1 lbs. (6.7kg) 13.5" x 9.7" x 4"
with tagline and carabiner (342mm x 246mm x 101mm)
928LS/18INYL Miller SofStop shock absorber pack with locking snap hook 1.4 lbs. (.6kg) 18"
and D-ring (400 lbs. [181kg] working load when using Falcon SRL) (457mm)
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening; Locking Rebar Hook – 2-1/2 inch (63mm) gate opening.
RL50SS/50FT 3/16" (5mm) stainless steel wire rope 50' (15m) 20 lbs. (9.1kg)
RL65G/65FT 3/16" (5mm) galvanized cable 65' (20m) 23 lbs. (10.4kg)
RL65SS/65FT 3/16" (5mm) stainless steel cable 65' (20m) 23 lbs. (10.4kg)
RL100G/100FT 3/16" (5mm) galvanized cable 100' (30m) 40 lbs. (18.1kg)
RL100SS/100FT 3/16" (5mm) stainless steel wire rope 100' (30m) 40 lbs. (18.1kg)
RL130G/130FT 3/16" (5mm) galvanized wire rope 130' (40m) 50 lbs. (22.7kg)
RL130SS/130FT 3/16" (5mm) stainless steel wire rope 130' (40m) 50 lbs. (22.7kg)
RL175G/175FT 3/16" (5mm) galvanized wire rope 175' (54m) 70 lbs. (31.7kg)
RL175SS/175FT 3/16" (5mm) stainless steel wire rope 175' (54m) 70 lbs. (31.7kg)
*Except in Canada where the Canadian Standards Association requires annual factory recertification.
**Also available without the carabiner and tagline. To order, add a “B” to the corresponding model number (Ex: RL20BP/20FT).
Notes: Also available with a stainless steel swivel top and stainless steel swivel snap hook. To order, add an “S”to corresponding model number (Ex.: RL20SS-S/20FT).
Locking Snap Hook – 3/4-inch (19mm) gate opening; Locking Rebar Hook – 2-1/2 inch (63mm) gate opening.
24
Fall protection products designed to meet the challenges of welding environments. Available in Lightweight/Comfort and
Heavy-Duty Harness models, Miller welding products also include a variety of connecting devices and anchorage connectors.
Lightweight/Comfort Welder Harness
• A complete line of lightweight, comfort welder harnesses features blue,
flame-retardant Nomex ® webbing to protect against weld splatter
• The special inner Kevlar ® core adds strength and high-temperature resistance
• Contrasting webbing colors make inspection easier #650K/UBL
• Rated to 400 lbs. (181.4kg) capacity when using a SofStop shock absorber (940K/6FTBL)
8815-12 Lightweight, fixed Shadow Beam Anchor – stainless steel and high-strength aluminum 4" to 12" (100mm to 305mm)
8815-24 Lightweight, fixed Shadow Beam Anchor – stainless steel and high-strength aluminum 12" to 24" (305mm to 610mm)
8816-14 Lightweight, adjustable ShadowLite Beam Anchor – high-strength aluminum 3" to 14" (96mm to 355mm)
8814-24 Adjustable Shadow Beam Anchor – stainless steel and high-strength aluminum 12" to 24" (30mm to 610mm)
Anchorage Connector
#8816-14
8185K/6FTBL 6' (1.8m) Nomex/Kevlar webbing cross-arm
strap with D-ring and loop; available in lengths
from 4' (1.2m) to 10' (3m)
Accessories
8477HG1/BL Durable MillerHyde bag w/heavy-duty zipper
closure and strong wrap-around carrying strap #8477HG1/BL
Nomex® and Kevlar® are registered trademarks of E.I. DuPont.
Miller Technical Support
800/873-5242
www.millerfallprotection.com 25
Rope, wire rope and web lanyards are recommended for “work positioning” and “restraint” only.
Wire rope
#201RLS-2/6FTWH
lanyards are
heat resistant
and highly
abrasion Standard nylon
Rope lanyards are resistant. web lanyards are
available in standard economical, abrasion #213WLS/6FTYL
nylon or polyester (for greater resistant and easy to clean.
chemical resistance) to meet Also available in polyester webbing
user needs. #207LS/6FTG for greater chemical resistance.
Harness Anchorage Special Standard
Model Material Connection Connection Features Length*
198RLS-2/6FTWH** Nylon rope Choke-off loop Locking snap hook – 6' (1.8m)
201RLS-2/6FTWH** Nylon rope Locking snap hook Locking snap hook – 6' (1.8m)
202RRS-2/6FTWH** Nylon rope Locking snap hook Locking rebar hook – 6' (1.8m)
203RLS-2/6FTWH** Nylon rope Locking snap hook Locking snap hook Adjustable 6' (1.8m)
204RLS-2/6FTWH** Nylon rope Locking snap hook Thimble for attaching a carabiner – 6' (1.8m)
207LS/6FTG Wire rope Locking snap hook Locking snap hook – 6' (1.8m)
207NLS/6FTV Vinyl-coated wire rope Locking snap hook Locking snap hook – 6' (1.8m)
210WLS/6FTYL*** Nylon webbing Locking snap hook Locking snap hook Adjustable 6' (1.8m)
212WLS/6FTYL*** Nylon webbing Locking snap hook Web loop – 6' (1.8m)
213WLS/6FTYL*** Nylon webbing Locking snap hook Locking snap hook – 6' (1.8m)
226WRS/6FTYL*** Nylon webbing Locking snap hook Locking rebar hook – 6' (1.8m)
*Additional lengths are available.
**To order polyester rope, add “-5” to the corresponding model number. (Ex.: 201RLS-2 becomes 201RLS-5).
***To order polyester webbing, add a “D” after the “W” in the corresponding model number. (Ex.: 210WLS becomes 210WDLS).
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening; Locking Rebar Hook – 2-1/2 inch (63mm) gate opening.
New ed
Im pr ov
De sig n!
#6756RS #6757WRS #6756RS4
Model Description
6756RS 13-link rebar chain assembly with two locking snap hooks and
one locking rebar hook; swivel attachment and length adjuster
6756RS4 4-link rebar chain assembly with two locking snap hooks and
one locking rebar hook; swivel attachment
6757WRS* 1" (25mm) nylon web positioning assembly with
two locking snap hooks and one locking rebar hook DuraFlex®
Harness
*Must specify webbing length of 27 inches (685mm) or 35 inches (889mm). #E650/UGN
Note: Locking Snap Hook – 3/4-inch (19mm) gate opening; Locking Rebar Hook – 2-1/2 inch (63mm) gate opening.
26
Miller rope grabs move easily up and down vertical lifelines to provide continuous
fall protection. Trailing models offer complete hands-free operation for increased
productivity. In the event of a fall, Miller rope grabs lock quickly.
• Compact design; corrosion-resistant stainless steel construction
• Lightweight and easy to use
#8174
#8175SLS/3FTYL
#8173 #8175
Miller rope grabs are designed for use with 5/8-inch (16mm) synthetic rope lifeline with a minimum tensile strength
of 5,000 lbs. (22kN), secured to an anchorage independent of the worker’s platform. Standard lifeline lengths are
25 feet (7.6m), 50 feet (15m), 75 feet (23m), and 100 feet (30m); additional lengths are available.
Wire rope grabs are designed for use with 5/16-inch (8mm) galvanized or stainless steel wire rope lifelines.
Model* Description
194R-2 Nylon rope lifeline with carabiner and thimble; 5/8" (16mm) diameter
194R-5 Polyester rope lifeline for greater chemical resistance with carabiner and thimble; 5/8" (16mm) diameter
195R-2 Nylon rope lifeline with thimbles; 5/8" (16mm) diameter
195R-5 Polyester rope lifeline for greater chemical resistance with thimbles; 5/8" (16mm) diameter
300L Polyester/polypropylene blend rope lifeline with locking snap hook and loop; 5/8" (16mm) diameter
*Must specify length when ordering.
28
Temporary Anchorage Connectors
Carabiners
400 lbs. (181.4kg) maximum capacity.
Steel twist-lock Lightweight, aluminum Triple-action twist-lock Large, steel twist-lock Large, aluminum
carabiner; 1-inch twist-lock carabiner; carabiner. Lightweight carabiner; 2-inch (50mm) twist-lock carabiner;
(25mm) gate opening. 1-inch (25mm) gate aluminum; 1-inch (25mm) gate opening. 2-1/4 inch (57mm)
Model 17D-1 opening. gate opening. Model 18D-1 gate opening.
Model 17D-2 Model 17D-3 Model 18D-2
Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchorage. Careful consideration should be
given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower
obstacles and support 5,000 lbs. (22kN) per worker. 400 lbs. (181.4kg) maximum capacity.
30
™
The first and only cost-effective, portable, engineered anchorage solution designed to protect
workers engaged in leading edge deck construction. The Miller Edge reduces the need for a
safety monitor or a temporary cable lifeline system on leading edge deck construction.
• Freestanding, mobile overhead anchor point
• Solid Althane™ wheel casters Applications
• Two integral eye bolt attachment points
• Concrete deck construction
accommodate self-retracting lifelines
• Bridge decks
• Predetermined integral lifting points
• Window washing
• Heavy-duty steel construction
with protective enamel paint • Vault entry
• Easy access handles on front and rear • Rescue situations
• Redundant braking system #9081
Model Description
9081 Standard Miller Edge with 7-1/2' (2.3m) anchorage height
9081/6.5FT Miller Edge with 6-1/2' (2m) anchorage height
9081/9.5FT Miller Edge with 9-1/2' (2.9m) anchorage height; includes
300 lbs. (136kg) additional counterweight required
9081/VBK-9.5 9-1/2' (2.9m) height conversion kit; includes 9081/VB-9.5
and 9081WT/300LB; converts a Standard Edge System
(9081) into a 9-1/2' (2.9m) high anchorage system
9081/VB-9.5 Vertical boom for 9-1/2' (2.9m) high Edge System;
boom measures 108" (274cm)
9081/VB-6.5 Vertical boom for 6-1/2' (2m) high Edge System; #9082
boom measures 72" (183cm) (See page 24 for
9081WT/300LB Set of 300 lb. (136kg) counterweights required for additional information.)
9-1/2' (2.9m) high Edge System
Model Description
9081MRMB MightEvac Bracket for Edge System; holds 1 or
2 units (MightEvac units, brackets and pulleys 9082 Swivel Bracket (retrofit) for 20' (6m) and 30' (10m) MightyLite SRL units (optional)
sold separately) 9083 Swivel Bracket (retrofit) for 50' (15m) and 65' (20m) MightyLite SRL units (optional)
Welder Harness
Miller Shadow Beam Anchors connect horizontally to a wide range of I and H beam flanges from #650K/UBL
3 inches (76mm) to 24 inches (610mm) wide and up to 2-1/2 inches (63mm) thick. Once attached, the units
(Models 8811, 8814, and 8816) slide along the beam with the worker to provide increased safety, mobility
and productivity. The fixed unit (Model 8815) is designed to be tightened horizontally or vertically, firmly
gripping the beam or column to provide a temporary or permanent anchorage attachment.
TTO
O
RAATTEED
D
R
s.
Model Description Fits Flange Sizes 40(1(108811.4.4lkkbgg))
IT Y Y
8811 Shadow Beam Anchor only – 5" to 12" CCA ACCIT
APPA
100% steel construction (127mm to 305mm)
940WLS/6FTGN 6' (1.8m) shock-absorbing web lanyard* with Double SofStop pack, two
locking snap hooks (designed for 12 ft. [3.7m] fall – use with beam anchors)
*For greater chemical-resistant blue webbing, substitute “BL” for “GN” in the suffix of the corresponding lanyard model
number (Ex: 940WLS/6FTBL).
Miller Technical Support
800/873-5242 31
www.millerfallprotection.com
ReadyRoofer ® Fall Protection System
Lightweight, Full-Body Harness Shock-Absorbing Lanyard
• Fully-adjustable, non-stretch harness • 3 ft. (.9m) polyester web lanyard with
integral shock absorber and two
Versatile, Reusable Roof Anchor locking snap hooks
w/Attachment D-Ring
High-Strength Rope Lifeline
• Easily installs on steep-pitched or flat-surface roofs #BRFK50/50FT
• 5/8-inch (16mm) diameter
• Reusable roof anchor
polyester/polypropylene rope with
loop and locking snap hook Model Description
Compact Trailing Rope Grab
• 9,300 lb. tensile strength, treated to BRFK25/25FT Kit w/25' (7.6m) rope lifeline
• Durable, corrosion-resistant, stainless steel construction
combat ultraviolet rays BRFK50/50FT Kit w/50' (15m) rope lifeline
• Attaches anywhere on the lifeline
Water-Proof Container BRFK75/75FT Kit w/75' (23m) rope lifeline
• Lightweight, easy-to-use design with
BRFK100/100FT Kit w/100' (30m) rope lifeline
hands-free operation • Ideal for equipment storage
RoofStrider Systems
RoofStrider II Kit
• MightyLite self-retracting lifeline w/360°
#RM50P/50FT rotating bracket
• Roof mounting assembly w/clamping feet
for use on standing seam metal roofs
#SRM30G/30FT
RoofStrider Kit RoofStrider II Systems (includes SofStop shock absorber Model 928LS/18INYL)
• MightyLite self-retracting lifeline w/360° rotating bracket SRM30G/30FT Complete system w/30' (10m) MightyLite SRL w/galvanized wire rope
• Roof mounting assembly for variable pitch wood roofs SRM50P/50FT Complete system w/50' (15m) MightyLite SRL w/webbing
(roof peaks or flat sides), most ridge vents, studs, joists, etc.
SRM50G/50FT Complete system w/50' (15m) MightyLite SRL w/galvanized wire rope
• Hardware included for mounting on wood roofs and metal decking SRM65G/65FT Complete system w/65' (20m) MightyLite SRL w/galvanized wire rope
RoofStrider Systems (includes DuraFlex stretchable harness Model E850/UGN, RoofStrider II Parts and Accessories
instructional video & carrying bag) SRM Roof mounting assembly w/clamping feet
RM50P/50FT Complete system w/50' (15m) MightyLite SRL w/webbing SRMF-1 Clamping feet w/hardware for standing seam metal roofs
RM50G/50FT Complete system w/50' (15m) MightyLite SRL w/galvanized wire rope SRMF-2 Feet and hardware for wood or metal decking
RA35-1 17D-1
RA10-1 RA15-1 RA20-1 RA30-1 • Reusable; • Steel, auto-locking
• 12 single use • 10 reusable • 2 reusable • Reusable; steep-pitched or flat roof flat surfaces carabiner
with nails anchors anchors with
screws
• D-rings, screws
32
Miller Permanent Roof Anchors
Permanent roof anchorages designed for residential and commercial construction.
Model Description
RA10-25/25FT Kit w/single-use roof anchors and 25' (7.6m) rope lifeline
RA10-50/50FT Kit w/single-use roof anchors and 50' (15m) rope lifeline
RA20-25/25FT Kit w/reusable roof anchors (RA10-1) and 25' (7.6m) rope lifeline
RA20-50/50FT Kit w/reusable roof anchors (RA20-1) and 50' (15m) rope lifeline
I-Beam Installation
• Intermediate stanchions
permit worker to pass
without disconnecting from
the lifeline — 100% tie-off
• Lightweight anchorages
(stanchions), (approx. 40 lbs. [18kg] Manyard® II
each) for easy one-person installation Shock-Absorbing
and handling — no tools required for Lanyard
#216M/6FTGN
stanchion installation
• Unique engineering design for I-beam
installation allows worker to immediately
attach to the lifeline eliminating fall hazards
Concrete Installation
• Same features as
I-beam installation
• Attaches to rebar
• Attaches to single-flared
coil inserts (Dayton/Richmond
B-18-3/4" x 6")
Model Model
(For beam flanges (For beam flanges
4" [101mm] to 18" [457mm] wide 6" [152mm] to 24" [610mm] wide
up to 1.5" [38mm] thick) up to 2.5" [64mm] thick) Length Description
DFA18/30FT DFA24/30FT 30'(9m) Single-span SkyWalker System; accommodates two workers
DFA18/60FT DFA24/60FT 60'(18.3m) Single-span SkyWalker System; accommodates two workers
DFB18/100FT DFB24/100FT 100'(30.5m) Multiple-span SkyWalker System; with one intermediate support
anchorage; accommodates four workers
DFB18/200FT DFB24/200FT 200'(61m) Multiple-span SkyWalker System; with three intermediate support
anchorages; accommodates five workers
DFB18/300FT DFB24/300FT 300'(91m) Multiple-span SkyWalker System; with five intermediate support
anchorages; accommodates five workers
Additional SkyWalker System Attachments Required for Concrete Applications
Model Description
DFPCA Two tie-back anchor brackets and shock absorber (one DFPCA kit required per system)
DFPCB One bracket adapter required for each anchorage (number of DFPCB bracket adapters required based on total number of
anchorages in system, including end and intermediate anchorages)
Note: SkyWalker System replacement components may be ordered separately. Contact Miller Customer Service at 800/873-5242.
34
Miller SkyWalker ™ Wire Rope Lifeline Kits
Typical Installations of SkyWalker™ Lifeline Kits
A Miller SkyWalker Wire Rope Lifeline may be used in conjunction
with approved Miller brand anchorage connectors to provide a
temporary horizontal lifeline system that is quick and easy to install.
Using D-Bolt Anchors
SkyWalker Kits:
• Miller D-Bolt Anchors may be installed to approved structures to provide a
temporary or permanent anchorage
Using Miller Grip™ Anchors
• Miller Grip Anchors may be used in concrete substrate or mining friction
bolts to provide secure points of attachment
• Miller Cross-Arm Straps conveniently wrap around I-beams and other
structures to form secure points of attachment Using Cross-Arm Straps
Non-Stretch
#RHL30/30FT
Harness
Miller Temporary Horizontal Lifeline Systems #650/UYL
Model Description
RHL30/30FT Temporary horizontal lifeline system with span of 30' (9m)
RHL60/60FT Temporary horizontal lifeline system with span of 60' (18m)
9031 Lifeline tensioner
9032 Anchoring lanyard
199RLS-5/30FTWH 30' (9m) polyester rope lifeline
199RLS-5/60FTWH 60' (18m) polyester rope lifeline
#9031
Model Description
TRS/30FT 30' (9m) TranScendor vertical climbing system
Cable sleeve
TRS/40FT 40' (12m) TranScendor vertical climbing system
TRS/50FT 50' (15m) TranScendor vertical climbing system
TRS/70FT 70' (21m) TranScendor vertical climbing system
TRS/100FT 100' (30.5m) TranScendor vertical climbing system
TRS/150FT 150' (46m) TranScendor vertical climbing system
TRS/200FT 200' (61m) TranScendor vertical climbing system Galvanized
TRS/300FT 300' (91m) TranScendor vertical climbing system cable lifeline
Model Description
23281 PivotLoc w/coupling part for steel ladder 9.186' (2.8m)
23193 PivotLoc w/coupling part for aluminum ladder 9.186' (2.8m)
Note: PivotLoc can be used in conjunction with Söll Y-Spar and Twin Ladder Systems.
• Effortless lifting and lowering with 5:1 gear ratio • Built-in mounting bracket
• 350 lb. (1.6kN) working capacity
Model Description
8442/65FT* ManHandler hoist w/65' (20m) of galvanized wire rope
8442/100FT* ManHandler hoist w/100' (30m) of galvanized wire rope
8440/60FT* Material winch w/60' (18m) of galvanized wire rope
8441/88FT* Material winch w/88' (27m) of galvanized wire rope
*Also available with stainless steel wire rope by adding “SS” after model number (Ex: 8442SS/65FT).
38
Miller Revolution ®
Harnesses & Accessories
™
Optional Padding
Model No. Standard Features Special Features* • Lightweight, high-strength aluminum construction for
RIA-P1 Shoulder/Leg Pads (2 pack) easy handling and long service life
RDF-QC/U Quick-Connect Buckle Legs
• Quick-Connect RIA-P2 Seat Pad • Modular design adapts to many applications, lowering
RDF-TB/U Chest Buckles Tongue Buckle Legs
Connection Points cost of ownership and providing effective safety
RDF-QC-B/U • Cam Buckles Removable Belt, Quick-Connect Buckle Legs
solutions
• ErgoArmor
RDF-TB-B/U Removable Belt, Tongue Buckle Legs RIA-C1 Sliding Belt Accessory Connectors (3 pack)
Back Shield • A variety of portable and fixed bases are available for
RDF-QC-DP/U • Stand-Up D-Ring Side D-Rings & Pad, Quick-Connect Buckle Legs RIA-C2 Universal Accessory & Belt Attachment Clip (2 pack) many confined space applications
• Self-Contained
RDF-TB-DP/U Side D-Rings & Pad, Tongue Buckle Legs Belts (Fits sizes 32" to 54")
Label Pack
RDF-QC-BDP/U • Web Finials Removable Belt, Side D-Rings & Pad, Quick-Connect Buckle Legs RIA-B1 Belt with PivotLink Attachments, 5 Accessory Connectors
RDF-TB-BDP/U Removable Belt, Side D-Rings & Pad, Tongue Buckle Legs RIA-B2 Belt w/pad and PivotLink Attachments, 5 Accessory Connectors
This equipment should only be used in conjunction with the manufacturer’s instructions. Failure to follow instructions could result in serious injury or fatality. For complete details, contact your nearest Miller Distributor
or call Miller Customer Service at 800/873-5242.
Miller Tripod Miller Quad Pod
The Miller Tripod is the anchorage connector for typical For applications where a
#8464
confined space and rescue systems. traditional tripod cannot be used,
the Quad Pod provides an
• Available in 7 ft. (2m) and
excellent alternative.
9 ft. (2.7m) models
• Versatile, two-piece unit consists
• Lightweight, high-strength
of a boom and base
aluminum construction
• Base features folding legs and a
• Withstands up to 5,000 lbs.
wheel for easy transport
(22kN) of vertical pull
• Boom rotates 360 degrees for
• Adjustable legs with integral
maximum maneuverability and Optional Base:
push pins, ideal for uneven #8464-3L, 24" (610mm)
features a mounting plate to
surfaces High Permanent Base
accommodate entry and
• Independent leg locking feature retrieval units
hold legs securely in place
Also available with permanent bases for
• Safety chain and tripod feet with mounting to truck beds or at confined Optional Base:
rubber skid pads and serrated #8464-3, 3" (76mm)
space entrances while transporting High Permanent Base
edge prevent slippage in the boom between locations.
icy conditions
• Available with reflective tape
Model Description
8464 Quad Pod System (Includes base with folding legs and boom)
Model Description
8464-1 Standard Quad Pod Base with folding legs
51 7' (2m) high-strength aluminum Tripod
8464-2 Quad Pod Boom
51X 9' (2.7m) high-strength aluminum Tripod
8464-3 3" (76mm) high permanent Quad Pod Base
8464-3L 24" (610mm) high permanent Quad Pod Base
Model Description
8847-9* Complete Davit System
8847-8 Permanent Davit System Mounting Base
*Consists of davit arm (8847-2), base (8847-1), self-retracting lifeline bracket (8847-3),
and pulley head assembly (8847-4).
Series 70 System
• Aluminum head assembly with roller pulley and anti-reversing lock
• Kernmantle rope with a tensile strength of 5600 lbs. (25kN) and high-temperature
resistance to 360°F (182°C) A secondary fall arrest
system is recommended.
• Rope control handle with friction locking device and with permanently attached Manyard
shock-absorbing lanyard
• Two carabiners Optional:
Bos’n Chair
• Convenient carrying bag #6004NS
Model Description
70-100/100FT* Series 70 System w/25' (7.6m) working length
70-200/200FT* Series 70 System w/50' (15m) working length
70-400/400FT* Series 70 System w/100' (30m) working length
70-500/500FT* Series 70 System w/125' (38m) working length
70-C Rope control handle w/attached Manyard shock-absorbing lanyard
*Rope length is divided by four to determine maximum working length.
The device must be ordered with Miller brand descent rope. Optional:
Bos’n Chair #6004NS
Model Description
AG10KT Complete Miller SafEscape System includes SafEscape rescue unit, 3/8" (9.5mm) polyester
rope, rescue harness, cross-arm strap, anchorage connector/carabiner, retrieval yoke and
convenient carrying bag
AG-10 Miller SafEscape automatic descender with rescue rope only (specify rope length)
000109/URK Miller rescue harness
40
Training is an integral part of a Fall Protection Program. To maintain a safe and
productive work environment, it is essential that employees working at heights:
• Recognize fall hazards
• Evaluate the risk posed by each hazard
• Control the hazard through preventative or protective measures
Miller/Troll® Training
• Field-experienced professional instructors
• Training programs that provide the awareness, knowledge and skills necessary
to ensure safety on the jobsite
• Customized on-site fall prevention and protection training available
• A series of pre-scheduled Open Enrollment Training courses conducted annually in
select cities throughout North America, with primary focus on the two-day Competent
Person Training program created for facility and site supervisors who must serve as
the Competent Person required by OSHA 1926.32(f), 1926.500 and 1910 standards
The fall protection industry has been bombarded with regulations and standards. Understanding these requirements is key to ensuring a safe work environment.
The Occupational Safety and Health Act (OSHA) under Title 29 of the Code of Federal Regulations (29 CFR) assures and enforces safe and healthful working
conditions for general industry and construction in the United States. Under the Act, employers have the duty of providing their workers with a place of employment
free from recognized safety and health hazards. It’s the law.
The American National Standards Institute (ANSI) and the Canadian Standards Association (CSA) are voluntary organizations made up of manufacturers and
consumers that establish product performance standards for fall protection safety. Meeting the standards indicates that products pass accepted testing procedures.
The standards are not enforceable as law, however many OSHA regulations are adopted from ANSI standards.
Employers should obtain copies of the regulations that apply to their work operations by writing to:
Occupational Safety and Health Administration (OSHA) Canadian Standards Association (CSA) European Document Research (EC)
200 Constitution Avenue, N.W., Washington, DC 20210 178 Rexdale Boulevard www.europeandocuments.com
www.osha.gov Etobicoke, Ontario, Canada M9W 1R3
416/747-4231
American National Standards Institute, Inc. (ANSI)
11 West 42nd Street, New York, NY 10036 British Standards Online (BS EN)
212/642-4900 www.bsonline.techindex.co.uk
Subpart R is for issues specific to special industries. European Community (CE Standards)
Telecommunications 1910.268 Directive for Personal Protective Equipment 89/686/EEC
Electric Power Generation, Transmission 1910.269
and Distribution Australia / New Zealand Standards
Additional Industry-Specific OSHA Regulations Industrial Fall Arrest Systems and Devices AS/NZS 1891.1-1995/Amdt 4-1999
Marine Terminals 1917 Safety Belts and Harnesses
Longshoring 1918
42
?
Illustration: 6 ft. (1.8m) Shock-Absorbing Lanyard with D-Bolt Anchorage Connector
SELECT THE
PROPER FALL
PROTECTION
EQUIPMENT
Shock-Absorbing Lanyard
or Self-Retracting Lifeline?
Always know your fall distance and
select proper equipment to meet the
fall clearance. OVER
UNDER 18 1/2 f t.
use a Shock-Absorbing
18 1/2 f t. * Lanyard or
always use a Self-Retracting Lifeline
Self-Retracting Lifeline
* For fall clearance under 14-1/2 ft. contact Miller Technical Serice 800/873-5242
#9051/BK
WristBandit Tool Holder #9077 Bandit Tool Lanyard #9076 WristBandit Tool Holder
Conveniently attaches to user’s wrist with Velcro®.
Tools are attached by cinching the lanyard cord
around tool.
Model Description
9076/BK WristBandit Tool Holder attaches to the user’s wrist
9077 Bandit Tool Lanyard attaches to the user’s belt
9077X/12 Consists of a box of 12 Bandit Tool Lanyards
Miller Technical Support
800/873-5242 43
www.millerfallprotection.com
MILLER® FALL PROTECTION PRODUCTS
TOTAL SATISFACTION ASSURANCE
We have been providing quality Miller brand fall protection equipment to millions of workers worldwide since 1945.
LMFPC/1007/20M/PMI