Professional Documents
Culture Documents
0
HKBN_SETUP_ROUTER_TOTOLINK_160415
1
HKBN_SETUP_ROUTER_TOTOLINK_160415
1
A.
USB LED
LAN LED
WAN LED
5G LED
2.4G LED
CPU LED
Power LED
WPS Button
WAN Port
LAN Port
2
HKBN_SETUP_ROUTER_TOTOLINK_160415
1
B.
To ensure that you have a stable and speedy network, please refer to the following as a
recommended minimum system requirement:
Central Processing Unit (CPU)
System Memory
Hard disk
Network Adaptor
3
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
Make sure you have a LAN cable connected from the HKBN wall plate/ONT to the WAN port
of your TOTOLINK (A2004NS) wireless router. Using a second LAN cable, connect it from
the router LAN port to the computer LAN port. Once finished, switch on the power supply for
the router and turn on the computer.
Open your Internet browser, and input [http://192.168.1.1] using the address-bar and press
[Enter].
Choose [Internet Wizard] to start the setup.
4
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
5
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
Choose [No MAC clone] and tick the box of [Allow a private internt IP address], click [Next].
6
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
Click [Next].
7
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
TOTOLINK (A2004NS) supports both 2.4GHz and 5GHz wireless connections. Create a
Wireless Network Name [SSID] for 2.4GHz network, click [Check SSID] to confirm the SSID
is available, then click [Next].
8
HKBN_SETUP_ROUTER_TOTOLINK_160415
Click [Search best channel], when the search result show up, pick one of the [Best channel]
or [Available] channel, click [Next].
9
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
10
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
Create a wireless password under [Network Key] and re-enter the password under [Confirm
the Network key], click [Next].
Confirm all settings are correct, click [Apply and Set 5GHz Wireless Network].
11
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
Create a Wireless Network Name [SSID] for 5GHz network, click [Check SSID] to confirm the
SSID is available, then click [Next].
12
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
Click [Search best channel], when the search result show up, pick one of the [Best channel]
or [Available] channel, click [Next].
13
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
14
HKBN_SETUP_ROUTER_TOTOLINK_160415
Connecting to TOTOLINK
Router
Create a wireless password under [Network Key] and re-enter the password under [Confirm
the Network key], click [Next].
15
HKBN_SETUP_ROUTER_TOTOLINK_160415
After logging into the router through your browser, click [Setup Tool].
16
HKBN_SETUP_ROUTER_TOTOLINK_160415
17
HKBN_SETUP_ROUTER_TOTOLINK_160415
Choose [DHCP User], tick the box of [Allow private IP] and [Restart DHCP client if the physical
WAN link is reconnected.], then click [Apply].
18
HKBN_SETUP_ROUTER_TOTOLINK_160415
Click [Internet Status] under [Network] tab of [Advanced Setup]. Confirm the [Connection
Type] has changed to [DHCP User (Dynamic IP)], click [Save] at right top corner.
19
HKBN_SETUP_ROUTER_TOTOLINK_160415
If the device is not accessible from the router setting page, you can reset to the factory default
setting by pressing the reset button:
1. Confirm your TOTOLINK router is switched on.
2. Press and hold the [Reset] button with a sharp object for 10 seconds until all LEDs change
to quick-flash, then release the button and wait for the router to reboot to its factory default
settings
3. Default Setting
Username / Password IP Address
admin / admin
192.168.1.1
The Reset Button is located at the right side of the power supply.
Reset Button
20
HKBN_SETUP_ROUTER_TOTOLINK_160415