Professional Documents
Culture Documents
Silicones
RTV Silicone
Rubber
Product selector guide
RTV Overview
RRoom
T Temperature
VVulcanizing
CONTENTS
P. 3
P. 4-5
P. 6-7
P. 8
P.9-10
P. 11
P. 12
P. 12
P. 13
P. 14
P. 15
P. 15-16
P. 17
P. 18
P. 19
P. 20
P. 20
P. 21
P. 22-24
P. 25-26
P. 27
P. 28
P. 28
P. 29
P. 30
P. 31
GE Bayer Silicones
UV Cure RTV:
RTV
1Part
Silicone
Varnish
Silicone
Condensation Cure
UV Cure
Millable
Silicone Rubber
2 Part
Silicone Oil
Condensation Cure
Addition (heat) Cure
Silicone RTV
Epoxy
Urethane
Temperature Range
-50 ~ +200 C
-50 ~ +150 C
-30 ~ +120oC
Heat Resistance
Excellent
Poor
Poor
Flame Retardancy*
Excellent
None
None
UV Stability
Excellent
Poor
Poor
Ozone Stability
Excellent
Poor
Poor
Modulus
Low
High
High
Industries / Applications
Electronics
GE Advanced Materials Silicones RTVs are used extensively in the Electronic and Electric industries to ensure
long term, reliable performance of critical components and electronic circuit assemblies. Silicone adhesives,
sealants, conformal coatings, potting gels / rubber, encapsulants, and thermal management materials play
a vital role in many of todays demanding electronic applications.
Typical Applications:
-
Power Module
Converter
Solar Cell
Hybrid IC
Micro-Electronic
Photo Couplers
Home Appliances
RTVs are commonly used in a wide variety of consumer goods and home appliance products. In addition to
strong adhesion performance to many substrates, silicones provide heat resistance, flame retardancy, and
moisture / dirt protection that make silicone an ideal material for a variety of sealing, bonding, and insulation
applications.
Typical Applications:
-
Gas Stoves
Heaters, Ovens
Control Panel Insulation
PCB Fixing & Sealing
GE Bayer Silicones
Automotive
The Automotive Industry plays a critical role in integrating new electronic technologies. As more and more
components migrate to electronic solutions, RTVs play an increasingly vital role in delivering material solutions to
provide design flexibility, protection, and long-term component reliability under harsh operating conditions.
Typical Applications:
-
Headlamp Seals
LED Lamp Potting
Airbag Coating
Engine FIPG Gaskets
Aerospace
Electronic component and frame assembly needs in the Aerospace Industry are served through RTV adhesives,
potting, coating, encapsulation, and sealing materials that withstand stress and termperature extremes.
Typical Applications:
-
Cockpit Instrument
Electronic Power Equipment
Circuit and Terminal Protection
Wire Sealant
Engine Gasketin
Ventilation Ducts
General Maintenance
Selection Guide
Product Index
O NE P A R T
Type
General
Purpose
Flame
Retardant
Heat
Resistant
Product Code
Cure Type
Characteristic
TSE392
TSE3925
TSE397
TSE3971
TSE3972
TSE3975
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
TSE399
TSE3991
TSE3995
TSE3996
RTV142
RTV160
RTV162
RTV5242/5243/5249
IS802/803/806/808
RTV102/103/108/109
RTV112/118
RTV1473
RTV157
RTV159
FRV1106
RTV6424
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Condensation
Condensation
Condensation
Acetoxy Flowable
Condensation
Condensation
Acetoxy Non-Flowable
Condensation
Condensation
Acetoxy Non-Flowable
Addition
Acetoxy Non-Flowable
Application
Adhesive
/ Seal
P.9
P.9
P.9
P.9
P.9
P.10
Coating
P.13
P.13
P.13
P.13
P.10
P.10
P.10
P.10
P.10
P.10
P.10
Addition
Condensation
TSE3941M
TSE3941
Condensation
Condensation
Alkoxy Non-Flowable
Alkoxy Non-Flowable, UL94 V-1
P.9
P.9
P.13
TSE3944
TSE3945
TSE3946
XE11-A5133S
Condensation
Condensation
P.9
P.9
P.9
P.13
Condensation
Condensation
TSE3976-B
RTV106
RTV116
Condensation
Condensation
TSE326
TSE326MEX
TSE3260
TSE3261-G
Addition
Heat
Addition
Addition
Heat
Heat
Addition
Heat
Addition
Addition
Addition
Addition
Addition
Addition
Addition
Addition
Heat
Heat
Flowable
Flowable
Flowable, UL94HB
Flowable
P.15
P.15
P.15
P.15
P.9
P.9
P.10
P.10
Non-Flowable
Gel
Semi-Flowable
Heat Flowable
Heat Semi-Flowable, UL94HB
Heat Flowable
Heat Flowable
Heat Flowable
Heat Semi-Flowable
Heat Semi-Flowable
Heat Semi-Flowable
Heat Semi-Flowable
Alkoxy Non-Flowable, UL94 V-0
Heat
Thermal
Mgmt.
P.13
P.13
P.13
P.13
TSE3051
TSE3212
TSE322
TSE322S
TSE3221S
TSE325
TSE3250
TSE3251
TSE3251-C
TSE3251H
TSE3251H-C
TSE3854D
Addition
Addition
Potting
P.11
P.11
P.11
P.11
P.11
P.15
P.14
P.14
P.14
P.14
P.14
P.14
P.15
P.15
P.15
P.9
P.13
P.10
P.10
P.10
P.11
P.11
P.11
P.11
P.13
P.19
P.19
P.15
P.19
P.19
GE Bayer Silicones
Product Index
O NE P A R T
Type
Thermally
Conductive
Junction
Coating
T WO P A R T
General
Purpose
Product Code
TSE3941
TSE3941M
TSE3946
XE11-A5133S
XE11-B5320
TSE3280-G
TSE3281-G
TSE3282-G
YG6111
YG6240
YG6260
YG6260V
TSK5303
Thermally
Conductive
Junction Coatings
Characteristic
Condensation
Alkoxy
Condensation
Alkoxy
Flowable
Condensation
Alkoxy
Condensation
Alkoxy
Condensation
Coating
Potting
P.13
P.13
P.10
P.11
P.11
P.11
Heat
Addition
Heat
Addition
Heat
TSJ3155
Addition
Heat
Rubber, Semi-Flowable
P.18
TSJ3156
TSJ3185
TSJ3186
TSJ3187
TSE3364
TSE3663
RTV11
RTV511
RTV560
RTV566
RTV567
RTV577
RTV8111
RTV8112
RTV8262
RTV60
RTV88
D1-SEA210
RTV6428
RTV615
RTV655
RTV6166
RTV6196
LVG342
TSE3032
TSE3033
TSE3062
Addition
Heat
Rubber, Semi-Flowable
Addition
Heat
Gel, Semi-Flowable
Addition
Heat
Gel, Semi-Flowable
Addition
Heat
Gel, Semi-Flowable
P.18
P.18
P.19
P.18
Condensation
Condensation
Room
Temperature
Room
Temperature
Flowable
Condensation
Room
Temperature
Flowable
P.17
P.17
P.17
Condensation
Room
Temperature
Flowable
P.17
Condensation
Room
Temperature
Flowable
P.16
Condensation
Room
Temperature
Room
Temperature
Flowable
P.17
P.16
Room
Temperature
Room
Temperature
Flowable
Condensation
Condensation
Room
Temperature
Flowable
Condensation
Condensation
Room
Temperature
Room
Temperature
Flowable
Flowable
Condensation
Room
Temperature
Non-Flowable
Condensation
Room
Temperature
Non-Flowable, UL94HB
Addition
Heat / Room
Temperature
Flowable
Addition
Heat
Flowable
Addition
Heat
Flowable
Addition
Addition
Heat / Room
Temperature
Heat / Room
Temperature
Addition
Heat
Addition
Heat
Flowable, Non-Adhesive
Addition
Heat
Flowable
Addition
Heat
Flowable, Gel,
Addition
Heat
Condensation
Room
Temperature
TSE3070
TSE3320
TSE3380
TSE3331
TSE3331K-EX
TSE3431-H
TSE3080
TSE3081
XE14-B7892
Addition
Heat
Addition
Room
Temperature
Addition
Addition
Heat
Heat
Addition
Heat
Addition
Heat
Addition
Heat
Addition
Heat
Addition
Heat
TSE3331
TSE3331K-EX
TSE 3080
Addition
Heat
Addition
Heat
Addition
Heat
Semi-Flowable,
TSE 3081
TSE3380
TSJ3175
XE14-B5778
Addition
Heat
Semi-Flowable
Addition
Heat
Addition
Heat
Gel, Semi-Flowable
Addition
Heat
Rubber, Semi-Flowable
Condensation
Condensation
Flowable
Application
Adhesive
/ Seal
P.9
P.9
P.9
Addition
XE14-7393
TSE350
Flame
Retardant
Cure Type
P.12
P.12
Flowable
P.17
P.17
Flowable
P.17
P.17
P.16
P.16
P.12
P.16
P.16
P.16
P.16
P.16
Semi-Flowable
Semi-Flowable
P.12
P.14
Flowable
Flowable, Gel, High-Elongation
Semi-Flowable
Thermal
Mgmt.
P.19
P.19
P.19
P.19
P.19
P.19
P.19
P.19
P.20
P.20
P.20
P.20
P.20
P.17
P.17
P.15
P.16
P.17
P.16
P.12
P.12
P.14
P.14
P.14
P.14
P.17
P.17
P.17
P.15
P.15
P.17
P.17
P.17
P.15
P.18
P.19
P.19
P.19
P.19
P.19
P.19
P.15
P.12
P.18
P.18
P.18
Property
General
Purpose
TSE392
Flame
Retardant
Heat
Thermally
Resistant Conductive
TSE3854D
TSE3941
RTV 162
N o n -F l o w ab l e
Standard Grades
General
Purpose
Flame
Retardant
TSE3925
TSE3945
RTV 142
TSE3946
Heat
Resistant
Thermally
Conductive
TSE3946
TSE3941
IS802/803/806/808
RTV106
RTV102/103/108/109
RTV1473
RTV157
RTV159
SemiFlowable
RTV1106
TSE3944
TSE3941M
TSE3975
TSE3971
TSE3972
RTV160
Low
Extra Low
Medium
Viscosity Viscosity
Flowable
High
Viscosity
TSE397
RTV112
RTV116
TSE399
TSE3995
TSE3991
TSE3996
Alkoxy
Acetoxy
RTV silicone adhesives and sealants are widely used in adhesion, coating, and potting applications.
Viscosity and flowablility of the material are key factors in the selection of the right RTV grade for
each application. GE Advanced Materials Silicones offers a wide range of grades in various levels
of flowability.
Non-Flowable
High Viscosity
Flowable
Low Viscosity
Flowable
Extra-Low Viscosity
Flowable
Solvent Type
GE Bayer Silicones
Alkoxy
Cure Type
Product Code
RTV142
RTV160
TSE3854D
TSE392
TSE3925
TSE3941
Feature
General Purpose
General Purpose
Flame Retardant
General Purpose
General Purpose
Low Volatility
Property
Non-Flowable
Low Valatility
Flowable
UL94HB
Non-Flowable
Non-Flowable
Non-Flowable
Non-Flowable
38 {380}
Viscosity (23C)
240
240
15
1.09
1.04
1.32
1.04
1.04
1.65
MPa {kgf/cm2}
Elongation
Adhesive Strength
MPa {kgf/cm2}
Linear Expansion
Thermal Conductivity
min
g/cm3
(shore A)
Tensile Strength
Flame Retardant
1/K
W/(mK) {cal/(cmsC)}
.
34
25
40
26
30
60
3.8 {39}
1.9 {19}
2.7 {28}
1.6 {16}
1.6 {16}
2.9 {30}
400
230
260
430
350
100
2.2 {22}
1.3 {13}
1.3 {13}
1.4 {14}
27x10-5
27X10-5
2.1x10-4
1.6x10-4
0.21
0.21
0.34 {8.0x10 }
0.18 {4.4x10 }
0.18 {4.4x10 }
0.83 {2.0x10-3}
Volume Resistivity
.
ohm cm
4.5x1015
4x1014
2.0x1014
2.0x1015
2.0x1015
4.0x1014
Dielectric Strength
kV/mm
20
20
25
22
22
22
Dielectric Constant
(60Hz)
2.8
2.8
3.1
2.9
2.9
4.0
Dissipation Factor
(60Hz)
0.001
0.001
0.02
0.005
0.005
0.04
UL94 V-0
UL94HB
UL94 V-1
Remarks
-4
-4
-4
Alkoxy
Cure Type
Product Code
TSE3941M
TSE3944
TSE3945
TSE3946
TSE397
TSE3971
TSE3972
Feature
General
Purpose
Flame Retardant
Low Volatility
Flame Retardant
Low Volatility
Flame Retardant
Low Volatility
General Purpose
General Purpose
General Purpose
Property
Flowable
Semi-Flowable
Non-Flowable
Non-Flowable
Flowable
Flowable
Flowable
100 {1000}
50 {500}
Viscosity (23C)
Pas {P}
min
Density (23C)
Hardness
Tensile Strength
Elongation
Adhesive Strength
Linear Expansion
Thermal Conductivity
g/cm3
(shore A)
MPa {kgf/cm }
2
%
MPa {kgf/cm2}
1/K
W/(mK) {cal/(cms C}
Volume Resistivity
ohm cm
Dielectric Strength
50 {500}
50 {500}
10
10
1.64
1.31
1.45
1.70
1.04
1.04
1.04
63
38
51
68
20
3.2 {33}
1.5 {15}
2.9 {30}
3.9 {40}
1.2 {12}
16
1.5 {15}
15
1.3 {13}
70
170
200
100
300
350
350
1.4 {14}
1.0 {10}
1.5 {15}
1.6 {16}
1.0 {10}
1.2 {12}
1.2 {12}
2.1x10-4
2.1x10-4
2.1x10-4
0.83 {2.0x10-3}
0.36 {8.0x10-4}
0.34 {8.0x10-4}
0.83 {2.0x10-3}
0.18 {4.4x10-4}
0.18 {4.4x10-4}
0.18 {4.4x10-4}
4.0x1014
1.0x1015
1.0x1015
4.0x1014
2.0x1015
2.0x1015
2.0x1015
kV/mm
21
22
22
23
22
21
21
Dielectric Constant
(60Hz)
4.0
3.8
4.5
4.0
2.9
2.9
2.9
Dissipation Factor
(60Hz)
0.04
0.02
0.05
0.04
0.005
0.005
0.005
UL94 V-0
UL94 V-0
UL94 V-1
Remarks
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
Product List
Adhesion and Sealing
1 Part Condensation Cure
Alkoxy
Cure Type
Product Code
Feature
Property
Viscosity (23C)
Pas {P}
min
Density (23C)
g/cm3
Hardness
(shore A)
Tensile Strength
MPa {kg/cm2}
Elongation
Adhesive Strength
MPa {kg/cm2}
Linear Expansion
Thermal Conductivity
1/K
.
W/(mK) {cal/(cmsC)}
TSE3975
TSE3976-B
General Purpose
Low Volatility
Heat Resistant
Low Volatility
XE11-B5320
Thermally
Conductive
Low Volatility
Non-Flowable
Acetoxy
RTV162
RTV5242
RTV 5243/RTV 5249
IS802/803/808
IS806
General Purpose
General Purpose
General Purpose
General Purpose
Non-Flowable
UL94HB
Non-Flowable
UL94HB
spreadable paste*
UL94HB
Flowable
Flowable
33 {330}
100 {1000}
Non Flowable*
10
240
45
25
30
1.05
1.08
2.59
1.09*
1.5*
1.04*
1.05*
UL94HB
25
30
80
35
40
23
22
1.2 {12}
1.7 {17}
3.6 {37}
3.8 {39}
2.2 {22}
1.7{17}
220
170
40
400
425
450
425
1.2 {12}
1.8 {18}
1.3 {13}
1.0 {10}
0.5 {5.4}
27x10-5
30x10-5
30x10-5
0.21 {5.0x10 }
0.18 {4.4x10 }
1.3 {3.1x10 }
0.21
2.0x1015
1.0x1015
2.0x1015
3.0x1015
-4
-4
-3
3.0x1015
0.21
0.21
2.5x1014
2.2x1014
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
23
20
17
18
20
20
20
Dielectric Constant
(60Hz)
2.9
3.5
2.6
2.8
2.8
2.9
2.9
Dissipation Factor
(60Hz)
0.005
0.01
0.005
0.001
0.001
0.0026
0.002
*Tested at 25C
Acetoxy
Cure Type
RTV106
RTV102/103
RTV108/109
RTV116
RTV112/118
Feature
Heat Resistant
General Purpose
Heat Resistant
General Purpose
Property
Non-Flowable
Non-Flowable
Flowable
Self-Leveling
Flowable
Red
20 {200}
Product Code
Viscosity (25C)
Tack Free Time
Density (25C)
Hardness
Tensile Strength
Elongation
Adhesive Strength
Linear Expansion
Thermal Conductivity
Soft,
Pas {P} spreadable paste
min
g/cm3
(shore A)
25 {250}
RTV157
High Strenght
RTV159
FRV1106
High Strenght
High Strenght
Non-Flowable
Non-Flowable
Non-Flowable
Paste
Paste
Paste
20
20
30
20
45
45
20
1.07
1.05
1.09
1.05
1.09
1.09
1.45
30
30
20
25
28
28
39
2.6 {26}
2.8{29}
2.5{25}
2.3{23}
6.9{70}
7.2{73}
3.3{34}
400
450
350
325
825
825
200
MPa {kgf/cm2}
1.4
0.7
27x10-5
27x10-5
27x10-5
27x10-5
27X10-5
27x10-5
0.21
0.21
0.21
0.21
0.21
0.21
2.0x1014
6.1014
MPa {kgf/cm }
2
1/K
.
W/(mK)
{cal/(cmsC)}
7.5x10
1.1x10
16
20.7
19.7
2.8
2.8
2.9
2.6
0.001
0.001
0.0009
0.0007
Volume Resistivity
ohm cm
3.0x10
Dielectric Strength
kV/mm
20
20
16
Dielectric Constant
(60Hz)
2.8
2.8
Dissipation Factor
(60Hz)
0.001
0.001
14
3.10
15
14
15
Tested at 1 kHz
10
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
Cure Type
Acetoxy
Heat Cure
Product Code
RTV1473
Feature
Property
Appearance
TSE3212
TSE322
TSE322S
TSE3221S
TSE326
TSE326MEX
TSE3260
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
Heat Resistant
General Purpose
Heat Resistant
Non-Flowable
Oil Resistance
Semi-Flowable
Flowable
Non-Flowable
Flowable
Flowable
Flowable
Light Blue
Translucent
Reddish Brown
Reddish Brown
Reddish Brown
Soft paste
White
Flowable
280 {2800}
180 {1800}
70 {700}
58 {580}
28 {280}
16 {160}
23 {230}
Cure condition
C/Hr
25
150/1
150/1
150/1
150/1
150/1
200/0.5
150/1
Density (23C)
g/cm3
1.06*
1.26
1.27
1.26
1.03
1.45
1.46
1.34
30
52
45
37
28
43
38
35
3.1{31}
3.7 {38}
3.4 {35}
3.6 {37}
2.8 {29}
3.4 {35}
2.9 {30}
1.7 {17}
500
240
230
230
370
170
180
250
1.4 {14}
2.6 {26}
2.5 {25}
2.5 {25}
2.5 {25}
2.0 {20}
1.5
0.5 {5}
1/K
1.9x10-4
1.9x10-4
2.1x10-4
2.1x10-4
1.7x10-4
1.1x10-4
1.9x10-4
W/(mK) {cal/(cmsC)}
0.29 {6.9x10-4}
0.29 {6.9x10-4}
0.29 {6.9x10-4}
0.18 {4.4x10-4}
0.41 {9.7x10-4}
0.41
0.18 {4.4x10-4}
ohm cm
2.0x1015
2.0x1015
1.0x1015
2.0x1015
2.0x1015
1.0x1015
Dielectric Strength
kV/mm
20
20
25
23
22
22
25
Dielectric Constant
(60Hz)
3.2
3.1
3.1
2.8
3.3
3.3
3.1
Dissipation Factor
(60Hz)
0.001
0.006
0.006
0.001
0.02
0.02
UL94V1
Viscosity (23C)
Pas {P}
Hardness
Tensile Strength
(shore A)
MPa {kgf/cm }
Elongation
Adhesive Strength
MPa {kgf/cm 2}
Linear Expansion
Thermal Conductivity
Volume Resistivity
Flame Retardant
6.0x1015
0.01
UL94HB
ULTI 190C
*Tested at 25C
Cure Type
Heat Cure
Product Code
Feature
Property
Appearance
Viscosity (23C)
Tack Free Time
Density (23C)
Hardness
Tensile Strength
Elongation
Adhesive Strength
Linear Expansion
Thermal Conductivity
Pas {P}
min
g/cm3
(shore A)
MPa {kgf/cm 2}
%
MPa {kgf/cm 2}
1/K
W/(mK) {cal/(cmsC)}
TSE3261-G
TSE3280-G
TSE3281-G
TSE3282-G
RTV6424
Heat Resistant
Thermal
Conductive
High Thermal
Conductivity
High Thermal
Conductivity
General Purpose
Flowable
Flowable
Flowable
Flowable
Non-Flowable
Gray
Gray
Gray
Gray
White
80 {800}
60 {600}
60 {600}
20 {200}
Paste*
150/1
150/1
150/1
150/1
150/1
1.48
2.10
2.70
2.70
1.17*
54
62
84
80
30
4.9 {50}
3.2 {33}
4.5 {46}
4.0 {41}
4.6 {47}
160
110
50
50
550
1.8 {18}
2.0 {20}
2.5 {25}
2.5 {25}
2.0
1.7x10
2.2x10-4
1.4x10-4
1.4x10-4
0.41 {9.7x10 }
0.88 {2.1x10 }
1.68 {4.0x10 }
2.0 {4.8x10 }
2.0x1015
2.5x1014
4.8x1014
4.8x1014
-4
-3
-3
-4
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
22
21
15
23
20
Dielectric Constant
(60Hz)
3.3
4.3
5.2
5.5
2.9
Dissipation Factor
(60Hz)
0.02
0.002
0.002
0.001
0.003
1.0x1015
*Tested at 25C
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
11
Product List
Adhesion and Sealing
Adhesion and Sealing
Cure Type
Product Code
Feature
Property
Appearance
Pas{P}
Curing Conditions
Density (23C)
Hardness
Low Volatile
Semi-Flowable
Flowable
Thixo Paste
White
Grey
White
100:100
100:100
10:1
65 {650}
40 {400}
Thixotropic paste
12*
160/0.6
150/1
g/cm3
1.54
2.70
1.19*
70
70
40
5.9 {60}
2.6 {26}
4.5 {46}
100
100
275
MPa {kgf/cm 2}
2.0 {20}
1.6 {16}
1/K
1.7x10-4
1.4x10-4
0.63 {1.5x10-4}
1.68 {4.0x10}
1.5x1015
2.1x106
1.1x1014
MPa {kgf/cm }
Linear Expansion
Thermal Conductivity
General Purpose
Elongation
Adhesive Strength
LVG342
100/1.0
(shore A)
Tensile Strength
TSE3380
High Thermal
Conductivity
C/Hr
(23C) hr
Pot Life
TSE3320
W/(mK) {cal/(cmsC)}
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
23
16
20
Dielectric Constant
(60Hz)
3.3
6.7
Dissipation Factor
(60Hz)
0.0007
0.002
Frenquency Tested
*Tested at 25C
Cure Type
Room Temperature
Product Code
TSE3663
TSE3664
D1-SEA210
Low viscosity/
Self Bonding
Flame Retardant
Self Bonding
Property
Flowable
Non-Flowable
Appearance
Off-White
Grey
Dark Grey
100:2
100:7.5
100:8
4.0 {40}
3.0 {30}
Thixotropic paste
Feature
Pas{P}
min.
(23C) hr
C/Hr
Curing Conditions
Density (23C)
g/cm
Hardness
Tensile Strength
Elongation
Linear Expansion
Thermal Conductivity
(shore A)
.
MPa {kgf/cm 2}
%
1/K
35
0.5
0.1
0.6*
23/72
23/72
RT/24
1.19
1.41
35
65
37
1.4 {14}
4.0{40}
2.1{21}
130
255
1.9x10-4
0.42 }1.0x10-3}
0.29
Volume Resistivity
ohm cm
1.0x1015
5x1015
Dielectric Strength
kV/mm
20
26
Dielectric Constant
(60Hz)
3.1
3.1
Dissipation Factor
(60Hz)
0.025
0.01
W/(mK) {cal/(cmsC)}
*Tested at 25C
12
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
Coating Silicones
Coating Silicones
Alkoxy
Cure Type
Product Code
TSE3941M
General
Purpose
Feature
Property
Viscosity (23C)
Pas {P}
min
Density (23C)
g/cm
Hardness
(shore A)
Tensile Strength
MPa {kgf/cm2}
Elongation
Adhesive Strength
MPa {kgf/cm2}
Linear Expansion
Thermal Conductivity
1/K
.
W/(mK) {cal/(cmC)}
TSE3944
TSE397
TSE3971
TSE3972
TSE3975
TSE3976-B
Flame Retardant
Low Volatility
Fast Cure
Fast Cure
Low Volatility
Heat Resistant
Low Volatility
Flowable
Paste
Semi-Flowable
Semi-Flowable
Flowable
Flowable
Flowable
50 {500}
50 {500}
100 {1000}
50 {500}
33 {330}
100 {1000}
10
10
10
1.64
1.31
1.04
1.04
1.04
1.05
1.08
63
38
20
16
15
25
30
3.2 {33}
1.5 {15}
1.2 {12}
1.5 {15}
1.3 {13}
1.2 {12}
1.7 {17}
70
170
360
350
350
220
170
1.4 {14}
1.0 {10}
1.0 {10}
1.2 {11}
1.2 {10}
1.2 {12}
1.8 {18}
2.1x10 -4
0.83 {2.0x10 }
-3
4.0x10
14
0.36 {8.0x10 }
-4
1.0x10
15
2.1x10 -4
2.1x10 -4
0.18 {4.4x10 }
-4
2.0x10
15
0.18 {4.4x10 }
-4
2.0x10
15
0.18 {4.4x10 }
-4
2.0x10
15
0.21 {5.0x10 }
2.0x10
15
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
21
22
22
21
Dielectric Constant
(60Hz)
4.0
3.8
2.9
2.9
2.9
2.9
Dissipation Factor
(60Hz)
0.04
0.02
0.005
0.005
0.005
0.005
Flame Retardant
Coating Silicones
UL94 V-0
21
TSE399
Feature
Fast Cure
Property
Flowable
Viscosity (23C)
2.5 {25}
Pas {P}
min
Density (23C)
g/cm3
Tensile Strength
Adhesive Strength
TSE3996
XE11-A5133S
Fast Cure
Low Volatility
Fast Cure
Low Volatility
Flame Retardant
Low Volatility
Flowable
Flowable
Flowable
Flowable
1.5 {15}
2.5 {25}
1.7 {17}
60 {600}
10
10
10
10
10
1.04
1.03
1.04
1.03
1.64
25
19
25
23
63
0.7 {7}
1.3 {13}
1.2 {12}
3.9 {40}
140
150
140
150
100
0.3 {3}
0.2 {2}
0.5 {5}
0.3 {3}
1.3 {13}
MPa {kgf/cm }
2
Linear Expansion
TSE3995
1.3 {13}
MPa {kgf/cm }
Elongation
TSE3991
(shore A)
Hardness
1/K
20
3.5
0.01
UL94HB
0.18 {4.4x10-4}
0.18 {4.4x10-4}
0.18 {4.4x10-4}
0.18 {4.4x10-4}
0.83 {2.0x10-3}
ohm cm
2.0x1015
2.0x1015
2.0x1015
2.0x1015
4.0x1014
Dielectric Strength
kV/mm
20
18
23
Dielectric Constant
(60Hz)
2.9
2.9
2.9
2.9
4.0
Dissipation Factor
(60Hz)
0.005
0.005
0.005
0.005
0.04
Flame Retardant
1.0x1015
Alkoxy
Product Code
Volume Resistivity
23
0.18 {4.4x10-4}
Cure Type
Thermal Conductivity
-4
W/(mK) {cal/(cmsC)}
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
20
20
UL94 V-1
13
Product List
Coating Silicones
Coating Silicones
Heat Cure
Cure Type
Product Code
Feature
Property
Appearance
Viscosity (23C)
Pas {P}
Curing Condition
Density (23C)
g/cm
Hardness
(shore A)
Tensile Strength
MPa {kgf/cm 2}
Elongation
Adhesive Strength
Linear Expansion
Thermal Conductivity
TSE3251
TSE3251-C
General Purpose
General Purpose
Flowable
Semi-Flowable
Semi-Flowable
Transparent
White
Translucent
TSE3221S
TSE325
General Purpose
General Purpose
Low Viscosity
Semi-Flowable
Flowable
Flowable
White
Translucent
White
280 {2800}
58 {580}
4.0 {40}
1.3 {13}
8.5 {85}
7.0 {70}
150/1
150/1
150/1
150/1
150/1
150/1
1.02
0.97
1.02
1.02
1.26
1.03
Low Viscosity
52
28
12
12
16
16
3.7 {38}
2.8 {29}
0.7 {7}
0.7 {7}
0.7 {7}
240
370
200
200
200
MPa {kgf/cm 2}
2.6 {26}
2.5 {25}
0.4 {4}
0.1 {1}
0.4 {4}
0.4 {4}
1/K
1.9x10-4
%
.
TSE3250
TSE3212
W/(mK) {cal/(cmsC)}
2.1x10-4
2.1x10-4
2.5x10-4
0.29 {6.9x10 }
0.18 {4.4x10 }
0.18 {4.3x10 }
0.17 {4.1x10-4}
0.18 {4.3x10-4}
0.18 {4.3x10-4}
2.0x10
6.0x10
2.0x10
2.0x10
2.0x10
2.0x1015
-4
-4
-4
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
20
23
21
21
20
20
Dielectric Constant
(60Hz)
3.2
2.8
2.9
2.8
2.8
2.8
Dissipation Factor
(60Hz)
0.001
0.001
0.001
0.001
0.002
0.001
Coating Silicones
15
15
Product Code
Property
Appearance
Viscosity (23C)
Pas {P}
Pot Life
TSE3033
TSE3331
General Purpose
General Purpose
Self Bonding
Flame Retardant
Semi-Flowable
Semi-Flowable
Flowable
Flowable
Flowable
White
Translucent
Transparent
Gray
Black
13 {130}
13 {130}
13 {130}
(25C) hr
Curing Condition
Density (23C)
g/cm3
(shore A)
Hardness
Tensile Strength
.
120/1
120/1
1.03
1.03
1.01
1.51
1.43
17
17
30
60
1.0 {10}
2.9 {30}
220
1/K
W/(mK) {cal/(cmsC)}
13 {130}4
150/0.5
%
MPa {kgf/cm }
Flame Retardant
150/1
1.0 {10}
13 {130}8
TSE3331K-EX
150/1
MPa {kgf/cm }
Elongation
Thermal Conductivity
TSE3251H-C
TSE3251H
Feature
Linear Expansion
15
Heat Cure
Cure Type
Adhesive Strength
15
15
0.6 {6}
2.1x10-4
0.18 {4.3x10-4}
1.0 {10}
220
0.6 {6}
2.1x10-4
0.18 {4.3x10-4}
130
50
3.0 {30}
50
270
1.3 {13}
3.9 {40}
2.3x10-4
1.7x10-4
0.17 {4.1x10 }
-4
0.63 {1.5x10}
0.53 {1.3x10-3}
ohm cm
2.0x1015
2.0x1015
2.0x1015
2.0x1014
6.0x1015
Dielectric Strength
kV/mm
20
20
21
26
22
Dielectric Constant
(60Hz)
2.8
2.8
2.8
3.4
3.1
Dissipation Factor
(60Hz)
0.001
0.001
0.001
0.017
0.015
Volume Resistivity
14
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
Potting Silicones
Potting Gels
1 Part Gels
2 Part Gels
Cure Type
Addition Cure
Addtion Cure
Product Code
TSE3051
Feature
Appearance
Mixing Ratio ((A)(B))
Viscosity (after mixing)
Pas{P}
min
Curing Conitions
C/Hr
Penetration
Density (23C)
Volume Expansion
Thermal Conductivity
TSE3062
XE14-B7393
TSE3070
TSE3080
TSE3081
Thermal
Conductivity
High Thermal
Conductivity
Heat Cure
General Purpose
Low Volatility
Transparent
Transparent
Transparent
Transparent
Black
Black
100:100
100:100
100:100
100:100
100:100
0.7 {7}
1.0 {10}
6.5 {65}
0.8 {8}
7.0 {70}
20.0 {200}
High Elongation
60
30
0.97
70/0.5
23/24
70/0.5
1/100
1/100
0.1 mm
125/2
55
100
65
g/cm3
85
0.97
0.97
0.98
1.5
2.5
1.0x10-3
1.0x10-3
1.0x10-3
1.0x10-3
0.17
0.17 {4.1x10 }
0.17
0.17 {4.1x10-4}
0.63 {1.5x10-3}
-3
1.26 {3.0x10
}
-
2.0x1015
2.0x1015
1.0x1015
1.0x1015
1.0x1015
1/K
.
W/(mK) {cal/(cmsC)}
-4
1x1015
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
18
18
18
18
22
22
Dielectric Constant
(60Hz)
2.8
2.7
2.7
2.7
3.3
5.0
Dissipation Factor
(60Hz)
0.001
0.001
0.002
0.04
0.003
1 Part Rubber
Potting Rubber
Addition Cure
Cure Type
Product Code
TSE325
Feature
Low Viscosity
Thermal Conductivity
XE11-A5133S
General Purpose
Fast Cure
Fast cure
Low Volatility
Fast cure
Low Volatility
Flame Retardant
Low Volatility
Flowable
Flowable
Flowable
Flowable
Flowable
2.5 {25}
1.5 {15}
2.5 {25}
1.7 {17}
60 {600}
min
150/1
150/1
10
10
10
10
10
1.02
0.97
1.04
1.03
1.04
1.03
1.64
%
MPa {kgf/cm 2}
Linear Expansion
TSE3996
Flowable
MPa {kgf/cm 2}
Elongation
TSE3995
1.3 {13}
g/cm
Adhesive Strength
TSE3991
4.0 {40}
(shore A)
Tensile Strength
TSE399
Flowable
Hardness
TSE3250
Pas {P}
Property
Viscosity (23C)
Alkoxy
1/K
.
W/(mK) {cal/(cmsC)}
12
25
19
25
23
63
0.7 {7}
1.3 {13}
0.7 {7}
1.3 {13}
1.2 {12}
3.9 {40}
200
0.4 {4}
0.1 {1}
2.1x10-4
2.5x10-4
0.18 {4.3x10 }
-4
2.0x10
15
0.17 {4.1x10 } }
2.0x10
150
140
150
100
0.2 {2}
0.5 {5}
0.3 {3}
1.3 {13}
-4
15
140
0.3 {3}
0.18 {4.4x10 }
0.18 {4.4x10
0.18 {4.4x10 }
0.18 {4.4x10
0.83 {2.0x10-3}
2.0x10
2.0x10
2.0x10
2.0x10
4.0x1014
20
-4
15
-4
15
-4
15
-4
15
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
21
21
20
18
23
23
Dielectric Constant
(60Hz)
2.9
2.8
2.9
2.9
2.9
2.9
4.0
(60Hz)
0.001
0.001
0.005
0.005
0.005
0.005
0.04
Dissipation Factor
Remarks
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
UL94 V-1
15
Product List
Potting Silicones
Potting Rubber
2 Part Rubber
Addition Cure
Cure Type
Product Code
RTV6428
RTV615
RTV655
RTV6166
RTV6196
Flame Retardant
General Purpose
Low Temperature
Resistant
General Purpose
Gel
General Purpose
Gel
Property
Flowable
Flowable
Flowable
Flowable
Flowable
Appearance
Dark Grey
Clear
Clear
Clear
Clear
1:1
10:1
10:1
1:1
1:1
1.3 {13}
4 {40}
5.2 {52}
0.75 {7.5}
0.75 {7.5}
Feature
Pas{P}
min.
240
240
120
15
C/Hr
100/1
100/1
100/1
150/0.5
150/0.5
1.02
1.04
0.98
0.98
62
44
45
3.3 {34}
6.5 {66}
6.5 {66}
60
120
120
21.6x10-5
27.0x10-5
33x10-5
27x10-5
27x10-5
W/(mK) {cal/(cmsC)}
0.31
0.2
0.2
Volume Resistivity
ohm cm
5.7x10
1.8x10
1.2x10
Dielectric Strength
kV/mm
20.9
19.7
19.7
20
20
Dielectric Constant
(1kHz)
3.09
2.7
2.7
2.8
2.8
Dissipation Factor
(1kHz)
0.0061
0.0006
0.0004
0.001
0.001
Density (25C)
Hardness
Tensile Strength
Elongation
Adhesive Strength
Linear Expansion
Thermal Conductivity
g/cm3
(shore A)
MPa {kgf/cm }
2
%
MPa {kgf/cm 2}
1/K
14
Product Code
Feature
Property
Appearance
Pot Life
0.19
0.19
1.0x1015
1.0x1015
Condensation Cure
Cure Type
15
2 Part Rubber
Potting Rubber
15
RTV60
RTV88
RTV560
RTV567
High Temperature
High Temperature
Low Temperature
Resistant
Low Outgassing
Flowable
Spreadable paste
Flowable
Flowable
Red
Red
Red
Translucent
100:0.5
100:0.1
30 {300}
3.9 {39}
47 {470}
880 {8800}
min.
1260
(25C) hr
0.75
2.25
RT/24
25/24
RT/168
Pas{P}
Curing Conditions
C/Hr
RT/24
Density (25C)
g/cm3
1.48
1.47
1.42
57
58
55
20
7.0 {71}
6.0 {60}
4.8 {49}
120
120
120
20x10-5
20x10-5
20x10-5
25x10-5
Hardness
Tensile Strength
Elongation
Linear Expansion
Thermal Conductivity
(shore A)
MPa {kgf/cm 2}
%
1/K
0.31
0.31
0.31
0.29
Volume Resistivity
ohm cm
4.4x1014
2.8x1014
2.0x1014
1.1x1015
Dielectric Strength
kV/mm
17.7
17.4
21.2
20.3
Dielectric Constant
(1kHz)
4.0
4.3
3.9
3.3
Dissipation Factor
(1kHz)
0.02
0.03
0.02
0.006
16
W/(mK) {cal/(cmsC)}
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
Potting Silicones
2 Part Rubber
Potting Rubber
Addition Cure
Cure Type
Product Code
Feature
TSE3032
TSE3033
TSE3331
TSE3331K-EX
TSE3431-H
XE14-B7892
TSE3663
TSE3664
General Purpose
Self Bonding
Flame Retardant
Flame Retardant
Flame Retardant
Flame Retardant
Self Bonding
Flame Retardant
Flowable
Flowable
Flowable
Flowable
Flowable
Black
Black
Off-White
Grey
Property
Appearance
Flowable
Flowable
Transparent
Transparent
Gray
Black
100:10
100:100
100:100
100:100
100:10
100:100
100:2
100:7.5
4.0 {40}
1.0 {10}
3.5 {35}
3.0 {30}
4.0 {40}
1.3 {13}
4.0 {40}
3.0 {30}
1.5
0.5
0.1
C/Hr
100/1
150/0.5
120/1
120/1
100/1
60/1
23/72
23/72
g/cm3
1.02
1.01
1.51
1.43
1.52
1.39
1.19
1.41
74
60
35
65
Pas{p}
Pot Life
(23C) hr
Curing Conditions
Density (23C)
Hardness
(shore A)
Tensile Strength
35
30
60
4.5 {46}
1.0 {10}
2.9 {30}
3.0 {30}
4.1 {42}
3.5 {36}
1.4 {14}
4.0{40}
210
130
50
270
60
100
130
3.9 {40}
0.9 {9}
1.7x10-4
1.9x10-4
1.9x10-4
0.63 {1.5x10 }
0.44 {1.1x10-3}
0.29 {6.4x10-4}
0.42 }1.0x10-3}
5.0x1014
2.5x1015
1.0x1015
5x1015
MPa {kgf/cm }
Elongation
Adhesive Strength
MPa {kgf/cm 2}
Linear Expansion
1/K
Thermal Conductivity
Condensation Cure
1.3 {13}
2.3x10-4
2.3x10-4
1.7x10-4
0.17{4.1x10 }
0.17 {4.1x10 }
2.0x1015
2.0x1015
-4
W/(mK) {cal/(cmsC)}
50
0.63 {1.5x10}
-4
0.53 {1.3x10 }
-3
-3
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
21
21
26
22
27
27
20
26
Dielectric Constant
(60Hz)
2.8
2.8
3.4
3.1
3.5
3.1
3.1
3.1
Dissipation Factor
(60Hz)
0.01
0.025
0.01
UL94 V-0
Non-Adhesive
0.001
Remarks
Non-Adhesive
2.0x1014
0.001
0.017
0.015
Adhesive
UL94 V-0
Adhesive
Adhesive
Condensation Cure
Cure Type
Product Code
TSE350
Feature
General Purpose
Property
Density (25C)
Hardness
Tensile Strength
Elongation
Adhesive Strength
Linear Expansion
Thermal Conductivity
RTV511
RTV566
RTV577
Low Outgassing
Low Temperature
Resistant
RTV8112
RTV8262
MIL-S-23586 E
MIL-S-23586 E
MIL-S-23586 E
Flowable
Flowable
Flowable
Paste
Flowable
Flowable
White
White
Red
white
white
white
red
100:0.5
100:0.5
100:0.5
100:0.1
100:0.5
100:2
100:5
100:5
12 {120}
11 {110}
16 {160}
42.7 {427}
700 {7000}
9.9 {99}
11 {110}
47 {470}
1*
1.5
1.5
1.5
0.5
C/Hr
23/72
25/24
25/24
RT/24
25/24
25/24
25/24
25/24
g/cm3
1.18*
1.19
1.21
1.49
1.35
1.18
1.19
1.47
47
41
42
61
48
45
42
52
2.5 {25}
3.6 {36}
2.7 {28}
5.6 {57}
3.1 {32}
2.5 {25}
2.1 {21}
4.1{42}
170
190
170
120
150
160
160
150
MPa {kgf/cm }
1/K
25x10-5
22x10-5
20x10-5
20x10-5
25x10-5
25x10-5
20x10-5
0.31
0.29
0.29
0.31
Pas{p}
(25C) hr
(shore A)
MPa {kgf/cm 2}
%
2
W/(mK) {cal/(cmsC)}
0.29
0.26
0.31
2.0x1014
Volume Resistivity
ohm cm
1.0x1014
Dielectric Strength
kV/mm
22
20.3
20.5
21.2
Dielectric Constant
(60Hz)
3.1
3.3
3.6
3.9
Dissipation Factor
(60Hz)
0.025
0.006
0.005
1kHz
1kHz
Frenquency Tested
RTV8111
Flowable
Curing Conditions
RTV11
Stone White
Appearance
Pot Life
0.01
UL94 V-0
Non-Adhesive
2 Part Rubber
Potting Rubber
6.0x1015
1.0x1015
2.0x1014
5.6x1014
Flowable
4.4x1014
1.0x10
2.7x10
18.5
19.7
18.7
3.9
3.3
4.02
3.98
0.02
0.02
0.0055
0.007
0.017
1kHz
1kHz
1kHz
1kHz
1kHz
15
15
18.5
*Tested at 23C
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
17
Product List
Silicone Junction Coatings
1 Part Materials
Addition Cure
Cure Type
Product Code
TSJ3155
TSJ3156
TSJ3185
TSJ3186
TSJ3187
Feature
Thixotropic
Thixotropic
Gel
Gel
Junction Coating
Property
Semi-Flowable
Semi-Flowable
Semi-Flowable
Semi-Flowable
Gel Semi-Flowable
White
Translucent
Translucent
Translucent
Translucent
Appearance
Viscosity (23C)
Pas {P}
6 {60}
6 {60}
3 {30}
4 {40}
10 {100}
Curing Conditions
C/Hr
150/4
150/4
150/4
150/6
150/4
Density (23C)
g/cm3
1.02
1.01
1.01
1.05
1.00
10
20
Hardness
(shore A)
Cubic Expansion
Thermal Conductivity
1/K
W/(mK) {cal/(cmsC)}
Volume Resistivity
Dielectric Strength
ohm cm
.
2.3x10
1.1x10
-3
1.1x10-3
1.5x1015
0.18
0.18 {4.3x10-4}
0.18 {4.3x10-4}
0.18
1.0x1015
1.0x1015
1.05x1015
40
1.1x10-3
0.18
1.5x1015
kV/mm
20
20
15
15
21
Dielectric Constant
(60Hz)
2.8
2.7
2.7
2.8
2.7
Dissipation Factor
(60Hz)
0.001
0.001
0.001
0.0004
0.0006
Na +K +
Less than 2
Less than 2
2 Part Materials
Addition Cure
Product Code
Feature
Appearance
Pas{P}
Hr
TSJ3175
XE14-B5778
Gel
Semi-Flowable
Black
Transparent
100:100
100:100
10 {100}
14 {140}
12
Curing Conditions
C/Hr
125/2
80/2
Density (23C)
g/cm3
1.00
1.02
16
(shore A)
Hardness
Penetration
1/10mm
Linear Expansion
Thermal Conductivity
1/K
.
W/(mK) {cal/(cmsC)}
70
1.0x10 *
-5
0.18 {4.3x10 }
-4
2.3x10-4
0.18 {4.3x10-4}
2.0x105
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
15
24
Dielectric Constant
(60Hz)
2.8
2.7
Dissipation Factor
Na + K +
(60Hz)
1.0x1015
0.0004
Less than 2
0.001
Less than 2
*cubic expansion
18
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
Cure Type
Alkoxy
Product Code
TSE3941
Feature
Flame Retardant
Property
Non-Flowable
Viscosity (23C)
Pas {P}
min
Density (23C)
g/cm3
Hardness
(shore A)
Tensile Strength
MPa {kgf/cm
Elongation
Adhesive Strength
MPa {kgf/cm2}
Linear Expansion
Thermal Conductivity
Volume Resistivity
1/K
.
W/(mK) {cal/(cmsC)}
ohm cm
TSE3941M
TSE3946
General Purpose
Flame Retardant
Low Volatility
Flowable
50 {500}
60 {600}
10
1.64
1.70
1.64
2.59
60
63
68
63
83
2.9 {30}
3.2 {33}
3.9 {40}
3.9 {40}
4.1 {41}
100
70
100
100
50
1.4 {14}
1.4 {14}
1.6 {16}
1.3 {13}
1.4 {14}
1.6x10 -4
0.83 {2.0x10 -3}
4.0x10 14
4.0x10 14
20
17
4.0
2.6
0.04
0.04
0.005
UL94 V-1
UL94 V-1
21
4.0
Dissipation Factor
(60Hz)
0.04
0.04
-
Heat
Heat
TSE3280-G
TSE3281-G
TSE3282-G
TSE3331
TSE3331K-EX
TSE3380
TSE3080
TSE3081
Thermal
Conductivity
High Thermal
Conductivity
High Thermal
Conductivity
Flame Retardant
Flame Retardant
High Thermal
Conductivity
High Thermal
Conductivity
High Thermal
Conductivity
Flowable
Flowable
Flowable
Flowable
Flowable
Gray
Black
Gray
Black
Black
100:100
100:100
100:100
100:100
100:100
20.0 {200}
Flowable
Gray
Hr
C/Hr
g/cm3
(shore A)
MPa {kgf/cm 2}
%
MPa {kgf/cm 2}
1/K
W/(mK) {cal/(cmsC)}
Flowable
Gray
Pas{p}
2.0x10 15
Cure Type
Appearance
4.0x10 14
4.0
0.83 {2.0x10 }
-3
4.0x10 14
22
UL94 V-1
1.9x10-4
4.0
Property
.
(60Hz)
Feature
Low Volatility
1.65
kV/mm
Product Code
Non-Flowable
Non-Flowable
Dielectric Constant
Remarks
Flame Retardant
Flowable
23
Dielectric Strength
XE11-A5133S XE11-B5320
Flame Retardant
Low Volatility
Gray
-
60 {600}
Flowable
60 {600}
20 {200}
3.5 {35}
3.0 {30}
40 {400}
7.0 {70}
150/1
150/1
150/1
120/1
120/1
150/0.5
1/100
1/100
2.10
2.70
2.70
1.51
1.43
2.70
1.5
2.5
62
84
80
60
50
70
25*
10*
2.9 {30}
3.0 {30}
2.5 {25}
70
270
100
1.3 {13}
3.9 {40}
1.5 {15}
1.7x10
1.4x10
0.63 {1.5x10-3
0.53 {1.3x10-3}
1.68 {4.0x10-3}
0.63 {1.5x10-3}
1.26 {3.0x10-3}
6.0x1015
2.1x1014
1.0x1015
1.0x1015
3.2 {33}
110
4.5 {46}
50
50
2.0 {20}
2.5 {25}
2.2x10
1.4x10
-4
4.0 {41}
-4
2.5 {25}
1.4x10
-4
0.89 {2.1x10-3}
1.68 {4.0x10-3}
2.0 {4.8x10-3}
2.5x1014
4.8x1014
4.8x1014
-4
-4
Volume Resistivity
ohm cm
Dielectric Strength
kV/mm
21
15
23
26
22
15
22
22
Dielectric Constant
(60Hz)
4.3
5.2
5.5
3.4
3.1
5.7
3.3
5.0
Dissipation Factor
(60Hz)
0.002
0.002
0.001
0.017
0.015
0.002
0.04
0.003
UL94 V-0
Adhesive
Frenquency Tested
2.0x1014
*penetration
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
19
Product List
Heat Conductive Silicone Grease
Heat Conductive Silicones
Silicone Grease
Cure Type
Product Code
Feature
Appearance
Density (23C)
Thermal Conductivity
YG6240
YG6260
YG6260V
TSK5303
Low Volatility
Low Bleed
Low Volatility
Good
Paintability
High Thermal
Conductivity
Low Volatility
Heat Resistant
Low Volatility
White
White
White
White
White
g/cm3
2.45
2.46
2.50
2.62
. o.
0.84 {2.0x10 }
0.84 {2.0x10-3}
0.84 {2.0x10 }
2.0x10
2.0x10
Volume Resistivity
YG6111
ohr cm
-3
2.0x10
14
-3
14
2.46
1.00 {2.4x10 }
-3
3.0x10
0.84 {2.0x10-3}
1.5x1014
Dielectric Constant
(60Hz)
5.4
5.0
5.0
5.0
5.0
Dissipation Factor
(60Hz)
0.005
0.006
0.005
0.006
0.005
310
290
300
340
330
Bleed
% (150 C, 24h)
0.5
0.0
0.2
0.1
2.11)
Evaporation
0.4
0.4
0.2
0.1
Penetration
(JISK2220)
0.41)
1) 200C, 24Hr.
1 Part
Condensation
Cure
Grease
20
Product Code
Low Molecular
Siloxane (D3-D10)
wt%
TSE3925
0.028
TSE3944
0.028
TSE3945
0.025
TSE3946
0.025
TSE3975
0.028
TSE3976-B
0.025
TSE3995
0.028
TSE3996
0.028
XE11-A5133S
0.025
XE11-B5320
0.020
Column Temperature:
Injection Temperature:
Gas Chromatography
Capillary Gas Chromagraph
Hewlett-Packard HP 6890
40C - 310C
260C
YG6111
0.010
Injection Amount:
1 micron 1
YG6240
0.003
Extraction Menstruum:
n-hexane
YG6260
0.003
YG6260V
0.010
TSK5303
0.0015
Test Method:
Equipment:
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
UL Status
The following products are recognized by Underwriters Laboratories Inc.
T WO P A R T
O NE P A R T
Type
Product Code
Color
Minimum
Thickness
mm
Temperature oC
Elec.
Mech.
HWI
(PLC)
HAI
(PLC)
HVTR
(PLC)
D495
(PLC)
CTI
(PLC)
IS802
IS803
IS806
IS808
White
Black
Red
Translucent
1.2 only
1.2 only
1.9 only
1.2 only
105
105
105
105
105
105
105
105
4
4
4
HB
HB
HB
HB
0
0
0
0
0
0
5
5
5
0
0
0
RTV160
RTV160
RTV160
RTV160
RTV162
RTV162
RTV162
RTV5242
RTV5242
RTV5243
RTV5243
RTV5249
White
White
White
White
White
White
White
White
White
Black
Black
Gray
0.75
1.5
2.5
3.0
0.91
1.5
3.0
1.5
3.0
1.5
3.0
1.5
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
4
3
3
3
2
3
3
3
3
3
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
-
1
5
5
5
-
0
0
0
0
-
RTV5249
TSE3854D-G
TSE3854D-G
TSE3854D-G
TSE3854D-W
TSE3854D-W
XE11-A5133S
Gray
Gray
Gray
Gray
White
White
White
3.0
0.75
1.50
3.0
1.5
3.0
3.0
105
105
105
105
105
105
105
105
105
105
105
105
105
105
3
0
0
0
0
0
-
HB
94V-0
94V-0
94V-0
94V-0
94v-0
94V-1
0
0
0
0
3
-
0
0
-
5
3
-
0
0
-
TSE3941
TSE3941
TSE3941
TSE3944-G
TSE3944-G
TSE3944-G
TSE3944-W
TSE3944-W
TSE3944-W
TSE3945
TSE3946
TSE3976-B
TSE3976-B
TSE3976-B
D1-SEA210
White
White
White
Gray
Gray
Gray
White
White
White
Gray
White
Black
Black
Black
Gray
0.75
1.5
3.0
0.75
1.5
3.0
0.75
1.5
3.0
3.3
3.0
0.64
1.5
3.0
2.5 only
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
2
1
0
0
0
0
2
1
3
94V-1
94V-1
94V-0
94V-0
94V-0
94V-0
94V-1
94V-0
94V-0
94V-0
94V-1
94HB
94HB
94HB
HB
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3
3
3
1
0
5
0
0
0
0
0
0
TSE3331
TSE3331
TSE3331
TSE3331
TSE3331K*EX
TSE3331K*EX
TSE3431-H
TSE3431-H
TSE3431-H
TSE3431-H
XE14-B7892
XE14-B7892
TSE3664
TSE3664
Black
Black
Black
Black
Black
Black
Gray
Gray
Gray
Gray
Black
Black
Grey
Grey
1.0
1.6
2.0
3.0
2.5
3.0
1.0
1.5
2.5
3.0
2.0
3.0
1.0
2.0
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
2
0
0
0
-
94V-0
94V-0
94V-0
94V-0
94V-0
94V-0
94V-0
94V-0
94V-0
94V-0
94V-1
94V-0
94V-1
94V-0
0
0
0
0
-
0
0
-
0
1
-
0
1
-
TSE3664
Grey
3.0
105
105
94V-0
21
Product List
1 Part Condensation Cure
Package
G e ne ral P urpos e
Product
C olor
RTV142
RTV160
RTV162
RTV5242
RTV5243
RTV5249
ISO802
ISO803
ISO808
ISO806
RTV102
RTV103
RTV108
RTV109
RTV112
RTV118
RTV1473
TRV157
RTV159
FRV1106
Color
100g Tube
W
White
White
White
White
Black
Gray
White
Black
Translucent
Red
White
Black
Translucent
Aluminum
White
Translucent
Black
Grey
Red
Red
333ml Cartridge
1kg Can
W
Can
W
06S
12C
12C
12C
12C
12C
12C
12C
12B
12C
12C
12C
06S
12B/12C
12T
12T
12C
06S
3TG
3TG
12T
85G
85G
85G
3TG
3TG
3TG
Drum
Pail
C
5GP
5GP
5GP
5GP
5GP
5GP
5GP
5GP
5GP
5GP
5GP
55G
Bttl
C
55G
55F
55F
55F
55G
55G
55G
55G
55G
55G
5GP
5GP
5GP
5GP
55G
55G
55G
06S/177G
06S
TSE392
TSE3925
TSE397
TSE3971
(4kg)
Thermally Conductive
Heat
Resistant
F lame R e tardant
TSE3972
TSE3975
TSE399
TSE3991
TSE3995
TSE3996
TSE3854D
TSE3941
TSE3944
TSE3945
TSE3946
XE11-A5133S
TSE3877-B
TSE3976-B
TSE3876
TSE3941
TSE3941M
TSE3946
XE11-A5133S
XE11-B5320
(4kg)
(130g)
(230g)
(150g)
(130g)
(150g)
(150g)
(150g)
(150g)
(150g)
(150g)
Silicone Grease
Package
G re as e
Product
YG6111
YG6240
YG6260
YG6260V
TSK5303
C olor
Tube Can
W
Legend
Pail
W
B
(200g)
(1kg)
(20kg)
(200g)
(1kg)
(20kg)
(200g)
(1kg)
(20kg)
(2kg)
(1kg)
(8kg)
22
5GP
55F
1GP
5GP
55G
001
002
010
012
018
040
044
080
440
495
06S
Pail (40.0LBS-18.16KG)
Drum (540.0LBS-245.16KG
Pail (10.0LBS-4.54KG)
Pail (50.0LBS-22.7KG)
Drum (450.0LBS-204.30KG)
Kit (1.0LBS-0.457KG)
Kit (2.0LBS-0.908KG)
Pail Kit (10.0LBS-4.54KG)
Pail Kit (12.1LBS-5.477KG)
Pail Kit (18.0LBS-8.17KG)
Pail (40.0LBS-18.16KG)
Pail Kit (44.0LBS-19.97KG)
Pail Kit (80.0LBS-36.32KG)
Kit (440.0LBS-199.76KG)
Kit (495.0LBS-224.73KG)
Cartridge (0.39OLBS-0.177KG)
GE Bayer Silicones
Product
Color
C olor
RTV6424
100g Tube
W
White
333ml Cartridge
1kg Can
W
G e ne ral P urpos e
Heat
Resistant
Thermally
Conductive
Bttl
C
06S
TSE3051
TSE3051-G
Junction
coating
Drum
Pail
W
(20kg)
TSE3212
TSE322
TSE322S
TSE3221S
TSE325
TSE3250
TSE3251
(18kg)
TSE3251-C
TSE3251H
TSE3251H-C
TSE326
(140g)
TSE326MEX
TSE3260
TSE3261-G
TSE3280-G
Red
Red
TSE3281-G
TSE3282-G
TSJ3155
Gray
(310ml)
(1.5KG)
(25KG)
Gray
Legend
5GP
55F
1GP
5GP
55G
001
002
010
012
018
040
044
080
440
495
06S
Pail (40.0LBS-18.16KG)
Drum (540.0LBS-245.16KG
Pail (10.0LBS-4.54KG)
Pail (50.0LBS-22.7KG)
Drum (450.0LBS-204.30KG)
Kit (1.0LBS-0.457KG)
Kit (2.0LBS-0.908KG)
Pail Kit (10.0LBS-4.54KG)
Pail Kit (12.1LBS-5.477KG)
Pail Kit (18.0LBS-8.17KG)
Pail (40.0LBS-18.16KG)
Pail Kit (44.0LBS-19.97KG)
Pail Kit (80.0LBS-36.32KG)
Kit (440.0LBS-199.76KG)
Kit (495.0LBS-224.73KG)
Cartridge (0.39OLBS-0.177KG)
23
Condensation
Cure
Product
General
Purpose
Flame
Retardant
Heat Resistant
Thermally
Conductive
Junction Coating
Addition
Cure
D1-SEA210
RTV88
RTV60
RTV8262
RTV8111
RTV8112
RTV577
RTV567
RTV566
RTV560
RTV511
RTV11
TSE3331
1kg Can
Dark Grey
Red
Red
Red
White
White
White
Red
Translucent
Red
White
White
Can
001
001
001
Pail
1GP/5GP/10
012/050
012/050
012
012
012
012
Drum
55F
Bottle
001
001
TSE3431-H
XE14-B7892
TSE3331
TSE3380
TSJ3175
XE14-B3445
XE14-B5778
TSE3062
XE14-B7393
TSE3070
TSE3380
TSE3431
TSE3663
TSE3032
TSE3033
RTV6428
RTV615
RTV655
RTV6166
RTV6196
LVG342
24
Color
001
001
(A/B: 6kg ea)
012
012
012/050
(A/B: 25kg ea)
500
(B: 100g)
(A: 18kg)
(A: 18kg)
(A: 15kg)
(A/B: 18kg ea)
Dark Grey
Clear
Clear
Clear
Clear
White
(B: 100g)
(B: 30g, 500g)
(B: 100g, 500g)
002
01
001
002
002
100
010/044/5GP
010
018/080
080
040
440
Legend
5GP
55F
1GP
5GP
55G
001
002
010
012
018
040
044
080
440
495
06S
Pail (40.0LBS-18.16KG)
Drum (540.0LBS-245.16KG
Pail (10.0LBS-4.54KG)
Pail (50.0LBS-22.7KG)
Drum (450.0LBS-204.30KG)
Kit (1.0LBS-0.457KG)
Kit (2.0LBS-0.908KG)
Pail Kit (10.0LBS-4.54KG)
Pail Kit (12.1LBS-5.477KG)
Pail Kit (18.0LBS-8.17KG)
Pail (40.0LBS-18.16KG)
Pail Kit (44.0LBS-19.97KG)
Pail Kit (80.0LBS-36.32KG)
Kit (440.0LBS-199.76KG)
Kit (495.0LBS-224.73KG)
Cartridge (0.39OLBS-0.177KG)
GE Bayer Silicones
6
5
C ure D e pth mm
30 oC,60%RH
20 oC,90%RH
20 oC,60%RH
20 oC,30%RH
10 oC,60%RH
2
1
0
24
48
72
Cure Time h
96
120
150 C
40
100 C
30
H ardne s s ( T ype A )
50
120 C
o
80 C
20
10
0
3
4
Cure Time h
150 C
o
120 C
100 C
o
80 C
3
4
Cure Time h
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
25
Technical Information
Curing Properties: 1 Part Condensation Cure
Adhesion strength gradually emerges after 2-10 hours. Full adhesion occurs at approximately 7 days.
Manifest ation of Adhesive Strength
0.6
0.3
0
0.2
TS
xy
)
0.1
0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Cure Time days
10mm/min
lk o
Test Speed:
(A
0.9
0.3
1.2
39
1.5
5
6
7
Cure Time h
10
Surface Preparation
All surfaces to be bonded should first be thoroughly cleaned. A cloth or industrial tissue
saturated with naphtha or methyl ethyl ketone (MEK) may be used to remove dirt, oil or grease
from non-plastic surfaces. Isopropanol is a commonly used solvent for preparation of plastic
surfaces to avoid crazing of the substrate. When practical, surfaces should be wiped dry before
applying the primer coating. Abrasion of the surface will also often improve adhesion.
When solvents are used as described, proper safety precautions must be observed.
substrate
Priming Procedure
25mm
sealant
10mm
1mm
Primer Properties
SS4120
SS4155
SS4179
Pink
Light Yellow
Clear,
Colorless
Blue
Clear,
Colorless
0.85
0.85
0.82
0.82
0.98
.
Solid Content,
%
15
15
10
Solvent(s)
Acetone
Isopropanol
Xylene Nbutanol
Acetone
Isopropanol
Xylene Nbutanol
Ethanol
Methanol
Mineral
Spirit
Ethyl
Acetate
toluene
Methanol
Flash Point
(Pensky-Martin
Closed Cup)
-12C (10F)
-12C (10F)
-05.C(31F)
37C (98F)
-3C (27F)
Gravity
Dry Time,
Minutes
Flammability
Recommended
RTVs
SS4179 primer must be allowed to air dry for at least 15 minutes at room temperature before
applying the RTV silicone rubber adhesive sealant.
For all of these silicone primers sufficient humidity must be available for proper drying.
A minimum of 25% relative humidity is suggested for all but SS4155 primer for which a
minimum of 40% is suggested. Formation of a chalky white haze indicates adequate drying
of the S4155 primer. Do not remove or contaminate such film prior to application of the RTV
silicone rubber compound.
Primers may be left to dry for up to 24 hours before application of the sealant without loss of
bonding effects. However, the primed surface must be covered to prevent dirt or contaminant
pick-up.
30
Flammable
30
Flammable
1 & 2 Part
1 & 2 Part
Condensation Condensation
30
30
15
Flammable
Flammable
Flammable
1 & 2 Part
Addition
All
1 Part
Condensation
Adhesion Corrosion
Storage
Stability
Cure
Speed
No irritating odor
No corrosion
Fast cure
Solvent crack on
polycarbonate
Fast
No irritating odor
No corrosion
Slow Cure
Slow
Alkoxy
Acetoxy
excellent
26
Cons
F as t
C ure
Specific
SS4044P
For most primers, a drying time of at least 30 minutes at room temperature is suggested prior
to application of the RTV silicone rubber adhesive sealant. On porous surfaces, a second coat of
primer may be required. Allow at least 30 minutes drying time between coats.
S lo w
C ure
Appearance
SS4004P
Primers may be applied by brushing, wiping or dipping. (Spraying may sometimes produce
erratic results.) A thin uniform primer coating of approximately 0.01 to 0.02 mm (0.5mil) thickness
usually provides the strongest bond. Care should be taken with plastic substrates such as
polystyrene or polycarbonates (LEXAN) which may tend to craze or become sticky when
primer is applied. Crazing can be minimized if the primer is applied with a single, continuous stroke.
High strength
Acetic acid odor
Strong Adhesion
of
Good transparency Corrosion
metals and stones
Fast cure
good
Fast
poor
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
Primerless
ME121
ME123
XP80-A5363
YP9341
Copper
Steel
Metals
Mild Steel
Brass
Stainless Steel
Aluminum
Corrosion Resistant Aluminum
Galvanized Steel
Tin
Acrylic Resin
Phenol Resin
Epoxy Resin
Polycarbonate
*2
*2
Plastic
Unsaturated Polyester
Polyamide
Nylon 66
*1
*1
*1
*1
PBT
PPS
ABS Plastic
Polypropylene
*3
Polyethylene
*3
Fluorocarbon Resin
Silicone Resin Laminate
Silicone Resin Gl
ass Cloth
Rubber
Chloroprene Rubber
Nitrile Rubber
Styrene Butadiene Rubber
Ethylene Propylene Rubber
Silicone
Wood
Inorganic
Glass
Mortar
ALC
Ceramic
*1: YP9341
*2: Cracking may occur under some usage conditions.
*3: XP80-A5363
Cedar
Cypress
Lauan
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
: Adheres completely
: Adheres, but separates from the surface when pulled
: Does not adhere
27
Technical Information
Adhesion: Addition Cure
Substrate
MPa {kgf/cm }
2
2.5 {25}
100
1.7 {17}
100
Brass
2.1 {21}
100
Stainless Steel
1.9 {19}
100
Nickel Plating
2.2 {22}
100
Solder Plate
2.0 {20}
100
PPS
2.1 {21}
100
PBT
1.5 {15}
100
Epoxy Resin
1.7 {17}
100
Polyester
1.6 {16}
100
Bakelite
2.5 {25}
100
Failure
%
2.0 {20}
100
1.6 {16}
100
Substrate: Ceramic
25
Adhesive
Strength
MPa {kgf/cm2}
Initial Measurement
Volume Change
TSE392
20
Decomposition
Acid
Test Conditions
Rate of Cohesive
Failure
%
Shear Adhesive
Strength
10
2
3
Elapsed Time h
Acetic Acid
Hydrofluoric Acid
Decompositon
Citric Acid
Phosphoric Acid
1mm
Concentrated Ammonia
Dielectric voltage
gauge for grease
Ammonia (10%)
sealant
12.5mm
Alkali
Equipment:
Point Interference
Low Volatility Effect on Motor Terminals
1ml
5ml
Low Volatile
1ml
5ml
204
3500
Mineral Oil
Castor Oil
Flax Seed Oil
1241
Test Method: 1ml and 5ml of sealant was applied to an airtight container turned with a
micrometer. Time required to come to a complete stop was measured.
Acetone
Butyl Alcohol
Solvent
TSE3925
505
Oil
TSE392
Ethyl Alcohol
Gasoline
Mineral Spirit
Water
Toluene
Water (room temperature)
Boiling Water (70h)
:<10%,
: 10-25%,
: 25-75%,
: >75%
Test Method: Volume change of cured liquid silicone rubber after
immersing 1week at 25C
28
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
GE Bayer Silicones
50
40
30
20
10
0
-10
20 oC
150 oC
200 oC
%
TSE392 Weight
Change During Cure
o
100 C
1mm thickness
5mm thickness
10mm thickness
23 C
1mm thickness
5mm thickness
10mm thickness
2
1
40
20
0
-20
15min 30min 1h
5h
10h
Elapsed Time h
1d
2d 3d 100h 7d
-10
20
0
-20
-40
-60
-80
14
30
90
Elapsed Time days
180
360
80
250 oC
60
40
20
0
TSE326 Hardness
100
Storage Stability
200
400
600
800
1000
400
TSE326 Adhesion
5.0
4.0
3.0
2.0
250 oC
1.0
0
200
400
600
800
Elapsed Time h
1000
Viscosity Pa
Hardness change %
Test Method: Hardness and adhesive strength are measured using a test sample that
has been returned to room temperature after being exposed to heat for
a specified period of time.
25 C
300
200
5 C
100
1
2
3
4
Storage Time months
Data provided above are average and the actual values may vary. Contract specifications need to be agreed upon individually.
29
Dispensing Equipment
Tube Type
Cartridge Type
Cartridge Type
Pail Type
30
Drum Type
GE Bayer Silicones
Americas
Europe
Asia/Pacific
GE Silicones
Worldwide HQ:
Waterford, NY
R&D
Application development
Basic manufacturing
Finishing
Corporate R&D
(Schenectady, NY)
GE Bayer Silicones
JV 50,1 % GE : 49.9 % Bayer
European HQ:
Leverkusen, Germany
R&D
Application development
Basic manufacturing
Finishing
GE Toshiba Silicones
JV 51 % GE : 49.% Toshiba
Asian HQ:
Ohta, Japan
R&D
Application development
Basic manufacturing
Finishing
Major locations
Leverkusen (Monomer, Intermediates, Finishing)
Bergen op Zoom , NL (Sealants Finishing) & European Logistics Center
Lostock , UK (HTV Rubber Compounding Center)
Bangalore , India (Sealants Packging, Rubber Compounding , Fluids Finishing)
31
Principal Locations
Regional Information
Phone
North America
World Headquarters
187 Danbury Road
Wilton, CT 06897, USA
800.295.2392
Fax
607.754.7517
Latin America
Av. Nove de Julho, 5229 7 andar
01407-907 So Paulo SP, Brazil
+ 55.11.3067.8671
+ 55.11.3067.8680
+ 49.214.30.1
+ 49.214.30.31924
Pacific
GE Toshiba Silicones
6-2-31 Roppongi
Minato-ku
Tokyo 106-8550 Japan
+ 81.3.3479.5361
+ 81.3.3479.5391
Specialty Fluids
800.523.5862
304.746.1654
304.746.1623
RTV Products-Elastomers
800.332.3390
304.746.1623
304.746.1654
Canada
St-Eustache, Quebec
800.363.0496
+ 450.974.0899
+ 450.974.0380
Latin America
Argentina and Chile
Brazil
Mexico and Central America
Venezuela, Ecuador, Peru, Colombia, and Caribbean
E-mail: csla.gesosi@ge.com
+ 54.23.2055.2857
+ 55.11.3067.8671
+ 52.55.5257.6042
+ 58.21.2902.5167
+ 54.23.2055.2811
+ 55.11.3067.8680
+ 52.55.5257.6094
+ 58.21.2902.5158
800.4321.1000
+ 41.22.989.2111
+ 31.164.293156
+ 41.22.989.2393
Pacific
Japan
E-mail: helpdesk@getos.co.jp
China
Korea
Singapore
Worldwide Hotline
800.295.2392
+81.276.20.6182
+ 86.800.820.0202
+82.2.530.6400
+ 65.6326.3918
+ 607.786.8131
+ 607.754.7517
The materials, products and services of GE Advanced Materials, Silicones and its parent, subsidiaries and affiliates (Supplier) are sold subject to the
Suppliers Standard Terms and Conditions of Sale which are available upon request. Although the information, recommendations or advice contained
herein is given in good faith, supplier makes no warranty or guarantee, express or implied, (i) that the results described herein will be obtained under
end-use conditions, or (ii) as to the effectiveness or safety of any design incorporating suppliers materials, products, services, recommendations or
advice. Each user bears full responsibility for making its own determination as to the suitability of Suppliers materials, products, services, recommendations or advice for its own particular purpose. Because actual use of products by the user is beyond the control of Supplier, such use is within the exclusive
responsibility of the user, and Supplier cannot be held responsible for any loss incurred through incorrect or faulty use of its products. Further, no statement
contained herein concerning a possible or suggested use of any material, product, service or design is intended or should be construed to grant any license
under any patent or other intellectual property right of Supplier or any of its subsidiaries or affiliated companies, or as a recommendation for the use of
such material, product, service or design in the infringement of any patent or other intellectual property right. Nothing in this or any other document shall
alter, vary, supersede or operate as a waiver of any of the Suppliers Standard Terms and Conditions of Sale.
March 2005
Version 1 SB/fk