Professional Documents
Culture Documents
Road Name:
MARRIS ID:
Road Type:
Length:
Affected CH:
NOTE: 1. All the quantity are provisional due to actual site conditions
2. S.O.R referring to JKR Schedules of Rate
<<PROJECT NAME>>
RATE
Item Description Unit Qty Amount (RM)
(RM)
RESURFACING WORK
Scarify Work
Mark, scarify, remove and dispose 10mm thick of existing m2
pavement surface including clean and prepare the surface to
receive tackcoat
Resurfacing
Supply and apply bituminous tack coat uniformly to surface of m2
binder course including cleaning the surface of pavement prior to
application (ave 0.2-0.5 litres/m2)
RECONSTRUCTION
Cut, excavate and dispose unsuitable materials other than rocks to m3
a designated dumping area within site
Supply, lay, spread, level and compact suitable earth fills to the m3
required formation level and profile to receive subbase
m3
Supply, lay and compact ACBC (Asphaltic Concrete Binding Course)
m3
Supply, lay, spread, level and compact shoulder materials to the
required formation level to Seal Roads (for Earth Shoulder only)
TRANSPORTATION COST
m3/km
Transportation Cost for Agg. for every km excess of 1st 10km
Transportation Cost for imported earth for every km excess of 1st m3/km
5km
ROAD MARKINGS
Painting of New Markings
Prepare and apply 3.0mm thick white or yellow reflective m2
thermoplastic pavement markings of size 100mm to 150mm wide
single continuous edge line marking
200mm wide intermittent give way line wide, with 300mm length m2
each and at 200mm gap
Prepare and apply not less than 1.5 mm thick high-reflective hot m2
spray all weather thermoplastic pavement markings for "AWAS"
or other lettering and directional Arrow
NEW SIGNAGE
Installation of New Sign
Supply erect and install new G.I. Pipe Class AA of inner diameter m
50mm as specified. The rate shall include mounting frames, clips,
bolts and nuts, ledge angle, U-bolts, painting , concrete footing
and excavation
Supply and install 1.5mm thick Aluminium Composite sign plates No.
inclusive of fabrication, mounting frames, clips, Ubolts, spot
welding to post and ancillary material with high intensity
reflective sheeting (600mm Regulatory and Warning / Mandatory
Sign)