Professional Documents
Culture Documents
Precautions
Location
Using the unit in the following locations can result in a
malfunction.
In direct sunlight
Locations of extreme temperature or humidity
Excessively dusty or dirty locations
Locations of excessive vibration
Close to magnetic fields
Power supply
Please connect the designated AC adapter to an AC outlet of the
correct voltage. Do not connect it to an AC outlet of voltage other
than that for which your unit is intended.
Handling
To avoid breakage, do not apply excessive force to the switches or
controls.
Care
If the exterior becomes dirty, wipe it with a clean, dry cloth. Do
not use liquid cleaners such as benzene or thinner, or cleaning
compounds or flammable polishes.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
If items such as cables are included with this equipment, you
must use those included items.
Unauthorized changes or modification to this system can void
the users authority to operate this equipment.
Vorsichtsmanahmen
Prcautions
Precauciones
Aufstellungsort
Emplacement
Ubicacin
Alimentation
Fuente de alimentacin
Stromversorgung
Schlieen Sie das optionale Netzteil nur an eine geeignete Steckdose
an. Verbinden Sie es niemals mit einer Steckdose einer anderen
Spannung.
Bedienung
Vermeiden Sie bei der Bedienung von Schaltern und Reglern
unangemessenen Kraftaufwand.
Reinigung
Bei auftretender Verschmutzung knnen Sie das Gehuse mit einem
trockenen, sauberen Tuch abwischen. Verwenden Sie keinerlei
Flssigreiniger wie beispielsweise Reinigungsbenzin, Verdnnungs- oder Splmittel. Verwenden Sie niemals brennbare Reiniger.
Bedienungsanleitung
Bewahren Sie diese Bedienungsanleitung gut auf, falls Sie sie spter
noch einmal bentigen.
*Alle Produkt- und Firmennamen sind Warenzeichen oder eingetragene Warenzeichen der betreffenden Eigentmer.
Maniement
Pour viter de les endommager, manipulez les commandes et les
boutons de cet instrument avec soin.
Entretien
Lorsque linstrument se salit, nettoyez-le avec un chiffon propre et
sec. Ne vous servez pas dagents de nettoyage liquides tels que du
benzne ou du diluant, voire des produits inflammables.
Conservez ce manuel
Aprs avoir lu ce manuel, veuillez le conserver soigneusement pour
toute rfrence ultrieure.
Manejo
Para evitar una rotura, no aplique excesiva fuerza a los conmutadores o controles.
Cuidado
Este producto ha sido fabricado de acuerdo a estrictas especificaciones y requerimientos de voltaje aplicables en el pas
para el cual est destinado. Si ha comprado este producto por
internet, a travs de correo, y/o venta telefnica, debe usted
verificar que el uso de este producto est destinado al pas en
el cual reside.
AVISO: El uso de este producto en un pas distinto al cual
est destinado podra resultar peligroso y podra invalidar la
garanta del fabricante o distribuidor.
Por favor guarde su recibo como prueba de compra ya que de
otro modo el producto puede verse privado de la garanta del
fabricante o distribuidor.
*Todos los nombres de productos y compaas son marcas comerciales o marcas
registradas de sus respectivos propietarios.Instalar la bater.
Thank you for purchasing the Korg kaossilator 2S dynamic phrase synthesizer. To help you get the most out of your new
instrument, please read this manual carefully.
Nous vous remercions davoir choisi le synthtiseur dynamique de phrase kaossilator 2S de Korg. Afin de pouvoir exploiter au mieux
toutes les possibilits offertes par linstrument, veuillez lire attentivement ce manuel.
Commandes
Controls
1. Internal mic
The kaossilator 2S can record sounds using the Internal
microphone, and is controlled by the mic on/off button.
TIP To avoid feedback, the internal speaker
automatically mutes when using the Internal
microphone.
1
2
3
4
5
6
2. Display
The OLED screen shows the selected program, tempo, and
other information. The lower section functions as the slider
guide.
7
15
fncbutton
8
9
Power button 10
new button
11
BPM indicator
snd button
arp button
mic on/off
button
VALUE slider
Volume buttons
12
REC button
13
Play button
14
Touchpad
Internal speaker
7. Touchpad
The touchpad provides fingertip performance control of the
kaossilator 2S. Please refer to the Playing and Performing
Using the Touchpad section for details.
4
5
6
7
Micro interne
cran
Bouton fnc
Tmoin BMP
Interrupteur 9
dalimentation 10
Bouton new
11
Boutons de
volume
Bouton snd
Bouton et
tmoin arp
12
(REC)Bouton
13
(Play) Bouton
14
Haut-parleur
interne
16
1
2
3
15
Lock button
6. VALUE slider
The VALUE slider offers fingertip program selection or
parameter editing. Stroking the slider with your finger will
smoothly change the value. To change the value in one-step
increments, tap either end of the slider.
Internal mic
Display
Bouton de dverrouillage
16
1. Micro interne
Le kaossilator 2S vous permet denregistrer les sons autour de
lui grce son microphone intgr. Un interrupteur permet
dactiver/de couper le microphone selon vos besoins.
ASTUCE Pour viter le Larsen (ce sifflement dsagrable), le son
du haut-parleur intgr est automatiquement coup quand vous
activez le micro de linstrument.
2. cran
Lcran indique le programme slectionn, le rglage de tempo
ainsi que dautres informations. La partie infrieure de lcran
fait office de guide pour le curseur.
3. Bouton snd (son)
Appuyez sur le bouton snd pour afficher la page dcran de
choix de programme.
4. Bouton et tmoin arp (arpgiateur)
Utilisez le bouton arp pour activer/couper larpgiateur et
accder aux paramtres de larpgiateur. Le tmoin est allum
quand larpgiateur est actif ou durant le rglage de ses
paramtres. Pour en savoir plus, voyez la section Utilisation de
larpgiateur.
5. Bouton mic on/off
Ce bouton commande le micro interne de linstrument ou un
micro connect sa prise MIC IN. Appuyez sur le bouton mic
on/off pour activer le micro. Mic Enable saffiche alors
lcran. Une nouvelle pression sur le bouton mic on/off coupe le
micro (lindication disparat). Pour rgler le niveau dentre du
micro, maintenez le bouton mic on/off enfonc et utilisez les
boutons de volume.
6. Curseur de rglage
Le curseur de rglage permet de choisir les programmes et de
modifier les paramtres dun simple glissement du doigt. Il
suffit de glisser un doigt sur le curseur pour produire un
changement fluide et continu de la valeur. Pour changer la
Note
Page number
Item
Value
Value slider guide
Battery indicator
Card status
Program select screen
Tempo
N de programme
Nom du programme
Boucle
Niveau dentre
Page de rglage
Elment
Valeur
Indicateur de piles
Statut de la carte
Setup screen
Numro de la page
Press the fnc button to advance through the list of Setup menu items. Hold the snd button while tapping the fnc button to step back
through the list.
Page
P-1/14
P-2/14
P-3/14
P-4/14
P-5/14
P-6/14
P-7/14
P-8/14
P-9/14
P-10/14
P-11/14
P-12/14
P-13/14
P-14/14
Item
BPM
KEY
SCALE
NOTE RANGE
ARP PATTERN
ARP TIME
ARP SWING
LOOP LENGTH
LOOP LOAD
LOOP IMPORT
FINALIZE
MASTER RECORDER
AUDIO PLAYER
UTILITY
Content
Specifies the tempo for arpeggiator playback, etc.
Specifies the key (pitch) that will be the root of the scale.*1
Specifies the scale assigned to the touch pad.
Specifies the octave range that can be played on the touchpad.*1
Specifies the arpeggio pattern.
Specifies the duration of the notes sounded by the arpeggiator.*1
Adjusts the timing of the arpeggiator.
Specifies the length of the loop phrase.
Loads loop data that was recorded by the kaossilator 2S.
Loads an external file as loop data.
Converts loop recorder data to usable data, such as in the DAW format.
Records your kaossilator 2S performance onto the memory card.
Plays back audio data from the memory card.
Tap the center of the VALUE slider to enter the UTILITY menu selections.
Default value
120.0
C
Ionian
Program
Type:01
000%
OFF
4 Beat
--ABLETON
----
Press the fnc button repeatedly until UTILITY appears; then tap the VALUE slider to select an item from the utility menu.
Page
U-1/10
U-2/10
U-3/10
Item
DATE
BATTERY TYPE
POWER SAVING
U-4/10
U-5/10
U-6/10
U-7/10
U-8/10
U-9/10
U-10/10
Content
Sets the date and time of the internal clock. This information is used to time-stamp files.
Specifies the type of battery being used.
Lowers the power consumption of the kaossilator 2S by limiting the speaker output to extend the
battery life.
Specifies whether the kaossilator 2S will automatically power-off (after four hours). *2
Adjusts the brightness of the screen. *3
Specifies the type of mic that is connected.
Tests the inserted memory card to check whether it can be used with the kaossilator 2s.
Checks and formats the memory card.
Calibrates the active region of the touchpad and VALUE slider.
Updates the system software of the kaossilator 2s. For more details on updating the system,
please refer to the Korg website.
*1 Availability depends on the program. Depending on the settings, you might not hear sound, or noise might be produced.
*2 Even with this is Enabled, the power will not turn off automatically if there is audio input.
*3 Extended use at high settings will affect the display's lifespan.
TIP After you select this setting, the program display will reappear if you dont perform any operation for a while. By
pressing the snd button you can immediately return to the program display.
Appuyez sur le bouton fnc pour passer en revue les options du menu de rglages (Setup). Pour faire dfiler la liste vers larrire, maintenez
le bouton snd enfonc en tapant sur le bouton fnc.
Page
P-1/14
P-2/14
P-3/14
P-4/14
P-5/14
P-6/14
P-7/14
P-8/14
P-9/14
P-10/14
Elment
BPM
KEY
SCALE
NOTE RANGE
ARP PATTERN
ARP TIME
ARP SWING
LOOP LENGTH
LOOP LOAR
LOOP IMPORT
P-11/14 FINALIZE
P-12/14 MASTER RECORDER
P-13/14 AUDIO PLAYER
P-14/14 UTILITY
Fonction
Rgle le tempo de larpgiateur etc.
Dtermine la tonique de la gamme.*1
Dtermine la gamme assigne au pad tactile.
Dtermine la tessiture du pad tactile.*1
Slectionne le motif darpge.
Dtermine la dure des notes produites par larpgiateur.*1
Rgle le timing de larpgiateur.
Charge des donnes de boucles enregistres avec le kaossilator 2S.
Charge un fichier externe sous forme de donnes de boucle.
Convertit les donnes de lenregistreur de boucles en donnes exploitables,
comme par exemple en format de fichier pour station DAW.
Sauvegarde/chargement de donnes.
Enregistre sur carte de mmoire ce que vous jouez sur le kaossilator
2s.
Lit des donnes audio de la carte de mmoire.
Tapez au centre du curseur de rglage pour accder au menu
UTILITY.
Appuyez plusieurs fois sur le bouton fnc jusqu ce que UTILITY saffiche, puis tapez le curseur de rglage pour choisir un lment du menu
Utility.
Page
U-1/10
U-2/10
U-3/10
Elment
DATE
BATTERY TYPE
POWER SAVING
U-4/10
U-5/10
U-6/10
U-7/10
Fonction
Rglage de la date et de lheure. Ces informations permettent de dater les fichiers.
Dfinit le type de piles utilises.
Limite le volume du haut-parleur afin de rduire la consommation du kaossilator 2S et daugmenter
ainsi la longvit des piles.
Dtermine si lalimentation du kaossilator 2S se coupe automatiquement aprs 4 heures.*2
Rglage de la luminosit de lcran. *3
Type de micro branch.
Vrifie la carte de mmoire insre pour sassurer quelle est compatible avec le kaossilator 2s.
Vrifie et formate la carte de mmoire.
Calibre la plage active du pad tactile et du curseur de rglage.
Mise jour du systme du kaossilator 2S. Pour en savoir davantage sur la mise jour du systme,
voyez le site web de Korg.
*1 Sa disponibilit dpend du programme. Selon les rglages, il peut arriver que le son soit inaudible ou que du bruit soit gnr.
*2 Mme avec le rglage Enabled (activ), lalimentation ne se coupe pas si un signal audio parvient linstrument.
*3 Une utilisation prolonge avec un rglage lev a une incidence sur la dure de vie de lcran.
ASTUCE Aprs avoir slectionn ce rglage, la page de slection de programme rapparat si vous neffectuez aucune opration durant un
moment. Une pression sur le bouton SND affiche immdiatement la page de slection de programme.
Vielen Dank fr Ihre Entscheidung zum dynamischen Phrasen-Synthesizer kaossilator 2S von Korg. Bitte lesen Sie sich diese
Anleitung vollstndig durch, um bei der Bedienung alles richtig zu machen.
Bedienelemente
1
2
3
Eingebautes Mikrofon
Display
snd-Taste
5
6
mic on/off-Taste
VALUE-Slider
7
15
Touchpad
tippen Sie auf das jeweilige Ende des Sliders. Um einen Wert in
kleinen Schritten zu ndern, mssen Sie ihn ganz links oder
rechts drcken.
fnc-Taste
8
BMP-LED
9
Ein-/Ausschalter
10
new-Taste
11
Lautstrketaste
12
(REC)-Taste
13
(PLAY)-Taste
Interner
Lautsprecher
Verriegelung
16
1. Eingebautes Mikrofon
Der kaossilator 2S kann Klnge mit dem eingebauten
Mikrofon aufnehmen. Hierzu dient die mic on/off-Taste.
TIPP Um Rckkopplungen zu vermeiden, wird der Lautsprecher
bei Verwendung des eingebauten Mikrofons stumm geschaltet.
2. Display
Im OLED-Display werden das gewhlte Programm, das
Tempo und andere Informationen angezeigt. Der untere
Bereich dient als Anzeige fr den VALUE-Slider.
3. snd-Taste (Sound)
Drcken Sie die snd-Taste, um die Programmwahl-Anzeige aufzurufen.
4. arp-Taste und -LED (Arpeggiator)
Mit der arp-Taste knnen Sie den Arpeggiator ein- und
ausschalten und auf dessen Parameter zugreifen. Die
LED leuchtet, wenn der Arpeggiator verwendet wird
oder dessen Parameter eingestellt werden. Weitere Informationen hierzu finden Sie im Abschnitt Verwendung
des Arpeggiators.
5. mic on/off-Taste
Taste zur Aktivierung des eingebauten Mikrofons oder
eines an die MIC-IN-Buchse angeschlossenen Mikrofons.
Drcken Sie die mic on/off-Taste, um das Mikro zu aktivieren - im Display erscheint Mic Enable. Drcken Sie
die mic on/off-Taste erneut, um das Mikro zu deaktivieren (Mic Enable erlischt). Halten Sie die mic on/offTaste gedrckt, knnen Sie mit den Lautstrke-Tasten
den Eingangspegel einstellen.
6. VALUE-Slider
Der VALUE-Slider dient zur Programmauswahl oder
Parameterbearbeitung mit den Fingerspitzen. Reiben Sie
mit dem Finger ber den Slider, um den Wert allmhlich
zu ndern. Um den Wert in Einer-Schritten zu ndern,
Bedienen Sie den VALUE-Slider nur mit Ihren Fingerspitzen, keinesfalls mit harten oder spitzen Gegenstnden. Wenn Sie den Slider mit solchen Gegenstnden oder Handschuhen bedienen, reagiert er womglich
nicht.
7. Touchpad
Das Touchpad ermglicht Ihnen, den kaossilator 2S mit den
Fingerspitzen zu spielen. Weitere Informationen hierzu finden
Sie im Abschnitt Spielen auf dem Touchpad.
8. fnc-Taste (Funktion)
Durch wiederholtes Drcken der fnc-Taste rufen Sie die einzelnen Eintrge des Parametermens auf, um diese einzustellen.
TIPP Wenn Sie die snd-Taste gedrckt halten, knnen Sie sich mit der
fnc-Taste rckwrts durch das Parametermen bewegen.
9. BPM-LED (Tempo)
Die BPM (Tempo) Anzeige blinkt im Takt des aktuellen Tempos.
10. Ein-/Ausschalter
Schaltet den kaossilator 2S ein und aus. Weitere Informationen
hierzu finden Sie im Abschnitt Ein- und Ausschalten des kaossilator 2S.
11. new-Taste
Siehe Einen Teil einer Phrase lschen und Lschen einer
ganzen Phrase.
12. Lautstrketaste
Zum Einstellen der Lautstrke des Kopfhrers oder des eingebauten Lautsprechers. Wenn das Mikrofon aktiviert ist, knnen
Sie hiermit den Eingangspegel regeln.
13. (REC)-Taste
Siehe Loop-Aufnahme.
14. (PLAY)-Taste
Siehe Loop-Aufnahme.
15. Interner Lautsprecher
Sie knnen Ihr Spiel auf dem kaossilator 2S ber den eingebauten Lautsprecher oder einen Kopfhrer wiedergeben. Wenn ein
Kopfhrer an die PHONES-Buchse angeschlossen ist, wird der
eingebaute Lautsprecher stummgeschaltet.
Tipp Bei bestimmten Programme ist der Pegel extrem niedrig bzw. hrt
man fast nichts.
16. Verriegelung
Drcken Sie die Verriegelung, um die Rckwand zu ffnen
und Batterien oder Speicherkarten einsetzen zu knnen. Hinweise dazu finden Sie im Abschnitt Gehuse ffnen.
Notenname Eingangspegel
Seitennummer
Tempo
Programmnummer
Programmname
Loop-Daten
Eintrag
Wert
VALUE-Slider
Anzeige
Batterieanzeige
Kartenstatus
Programmwahl-Anzeige
Seitennummer
Drcken Sie die fnc-Taste, um sich durch die Liste des Parametermens zu bewegen. Halten Sie die snd-Taste gedrckt,
um sich mit der fnc-Taste rckwrts durch die Liste zu bewegen.
Seite
P-1/14
P-2/14
P-3/14
Eintrag
BPM
KEY
SCALE
P-4/14
P-5/14
P-6/14
P-7/14
P-8/14
P-9/14
P-10/14
P-11/14
NOTE RANGE
ARP PATTERN
ARP TIME
ARP SWING
LOOP LENGTH
LOOP LOAD
LOOP IMPORT
FINALIZE
Bedeutung
Tempowert fr die Arpeggiator-Wiedergabe usw.
Wahl des Grundtons (Tonhhe) der Skala.*1
Wahl der Skala, die auf dem berhrungsempfindlichen Pad gespielt werden kann.
Wahl des Oktavbereichs, der mit dem Pad gespielt werden kann.*1
Anwahl eines Arpeggio-Pattern.
Hier legen Sie die Dauer der vom Arpeggiator gespielten Noten fest.*1
Regelt das Timing der Arpeggiator-Noten.
Hiermit whlen Sie die Lnge der Phrase von Loop I.
Ldt Loops, die mit dem kaossilator 2S aufgezeichnet wurden.
Ldt eine externe Datei als Loop.
Konvertiert aufgezeichnete Loops ins WAV-Format zur Bearbeitung mit
DAW-Software.
Erlaubt die Aufnahme Ihres Spiels auf dem kaossilator 2S auf eine Speicherkarte.
Erlaubt das Abspielen der Daten von einer Speicherkarte.
Drcken Sie auf die Mitte des VALUE-sliders, um das UTILITY-Men
aufzurufen.
Vorgabewert
120.0
C
Ionian
Program
Type:01
000%
OFF
4 Beat
--ABLETON
----
Drcken Sie die fnc-Taste, bis UTILITY erscheint und whlen Sie mit dem VALUE-Slider einen Eintrag aus dem UtilityMen.
Seite
Eintrag
U-1/10 DATE
Bedeutung
Hier knnen das Datum und die Uhrzeit eingestellt werden. Diese Informationen werden fr die Datierung der Dateien verwendet.
U-2/10 BATTERY TYPE
Angabe des verwendeten Batterietyps.
U-3/10 POWER SAVING
Senkt den Stromverbrauch des kaossilator 2S durch Begrenzung der maximalen Lautstrke, so dass die Batterie lnger hlt.
U-4/10 AUTO POWER OFF
Hiermit knnen Sie angeben, ob sich der kaossilator 2S (nach ein paar Stunden) automatisch ausschalten soll.*2
U-5/10 DISPLAY BRIGHTNESS Hiermit stellen Sie die Display-Helligkeit ein. *3
U-6/10 EXT.MIC SETTING
Hiermit geben Sie an, welchen Mikrofontyp Sie angeschlossen haben.
U-7/10 CARD TEST
Hiermit knnen Sie die eingesteckte Speicherkarte testen, um zu berprfen, ob sie
sich fr den kaossilator 2S eignet.
U-8/10 CARD FORMAT
Hiermit kann die Speicherkarte berprft und formatiert werden.
U-9/10 PAD CALIBRATION
Hiermit kalibrieren Sie den aktiven Bereich des Pads und des VALUE-sliders.
U-10/10 SOFTWARE UPDATE Hiermit kann das Betriebssystem des kaossilator 2S aktiviert werden. Alles Weitere
hierzu finden Sie auf der Korg-Webpage.
*1 Nicht fr alle Programm-Typen belegt. Bei bestimmten Einstellungen hren Sie nichts bzw. nur Rauschen.
*2 Selbst wenn Sie diese Einstellung aktivieren, schaltet sich das Gert nur aus, wenn kein Eingangssignal mehr empfangen wird.
*3 Wenn Sie lngere Zeit einen hohen Wert verwenden, verringert dies die Lebensdauer des Displays.
Tipp Selbst nach Anwahl dieser Einstellung wird nach einer Weile wieder die Programm-Seite angezeigt, wenn Sie lngere Zeit nichts mehr
einstellen. Drcken Sie die snd-Taste, um sofort zur Programmwahl-Anzeige zu springen.
Press the lock button to release the back cover lock. Slide the
kaossilator 2S toward yourself and separate it from the cover.
Connections
Fit the tabs of the back cover into the upper part of the
kaossilator 2S, and close the cover until you hear the lock
button click.
AC adapter
(sold separately)
Mic
Headphones
1. To remove the memory card, press it into the slot until you
hear it click, and then release your finger.
2. The memory card will pop out part-way, allowing you to
pull it out.
When inserting a memory card, make sure that it
is oriented correctly and that the correct side is facing
upward, and then insert it all the way into the slot,
being careful not to use excessive force.
Do not insert or remove a memory card while the
kaossilator 2S is powered-on. Doing so may damage
the data in the kaossilator 2S or on the card, or it may
render the memory card unusable.
Formatting
ARP TIME: If ARP TIME is set to 100%, the notes will be played
legato. If the setting is -100%, the duration will be extremely
short, and the notes will appear to be interrupted.
TIP With short settings, some programs might not produce
any sound.
DC 4.5V jack
Lock button
While holding down the arp button, use the VALUE slider to select
an arpeggiator pattern in the range of Type: 0150.
TIP This item can also be set from within the menu.
Performing
Turning the kaossilator 2S On and Off
Choosing a program
You can specify the tempo for drum pattern programs, the
arpeggiator, or loop recording. Press the fnc (function) button
to access the BPM parameter.
BPM: With the BPM displayed, stroke the VALUE slider or
tap either end of the slider to change the value. In addition,
tapping the center of the VALUE slider several times will set
the BPM to the interval that you tapped.
Loop recording
The kaossilator 2S can quickly record audiousing either an
internal program or from an external sourceand then instantly
transform that recording into a loop. Additional overdubs can then
be recorded. Loop Recording can capture up to two measures of 4/4
timeor up to eight beats.
Because the kaossilator 2S records directly to the
memory card, a memory card is required.
Recording a Loop
Using an Internal Program
While holding down the Play button, use the VALUE slider to edit
the loop length shown in the display.
TIP The length of the loop you can record is limited to a
maximum of four beats when the BPM value is 37.574.9,
and to a maximum of two beats when the BPM value is
20.037.4.
TIP This item can also be edited from within the setup
menu.
TIP The loop length cannot be changed while recording.
Undo function
Finalizing creates WAV files for each loop and overdub. These
files can be edited with sound wave editing software on the
computer, or loaded into individual tracks of DAW software.
TIP WAV files created with the kaossilator 2S will be
in the BWF (Broadcast Wave File) format containing
time information. When BWF-compatible DAW
software is used, the data can be used as a file with a
uniform time axis, even if it is not finalized.
1. Press the fnc button until the screen indicates FINALIZE.
2. Use the VALUE slider to select the option.
MATERIAL: Only the material file is finalized.
2MIX: Only the 2-mix files are finalized.
BOTH: Both the material file and 2-mix files are finalized.
ABLETON: Converts loop recorder data to the Ableton
Live Set.
3. Use the VALUE slider to select OK. Finalizing starts. Finalized data is written to the 2MIX folder, MATERIAL folder,
and LIVE folder that are located inside the KO2S/DATA/
L???/FINALIZE folder.
TIP This operation may take some time, depending
on the size of the loop data.
TIP The most recent state (including the results of
Undo and Redo) at the moment you execute Finalize is
written to the finalize folder. This overwrites the
results (the files) of any previous Finalize operation; if
necessary, you should make a backup before you
execute.
Master recorder
The performances that youve created on the kaossilator 2S
can be recorded to a memory card.
1. Press the fnc button to until the screen indicates MASTER
RECORDER.
2. Tap the VALUE slider to begin recording. A counter will
start.
3. Press the snd button to return to the selected program, and
start performing.
4. To stop recording, press the fnc button to make the screen
indicate MASTER RECORDER, and tap the VALUE slider.
TIP Recording will end automatically when the
memory card has no more space left, or when the
recording time reaches approximately two hours.
TIP The audio data is saved as a file named
KO2SREC??.WAV (?? is 0099) located in the
RECORD?? folder inside the RECORD folder inside
the KO2S folder.
Do not use your computer to edit the files inside
the RECORD folder.
Audio Player
Specifications
Connectors: MIC IN jack (Stereo 1/8 mini phone jack)
PHONES jack (Stereo 1/8 mini phone jack)
DC4.5V jack
Power supply:
Two AA batteries (alkaline or nickel-metal
hydride batteries)
Battery life: approximately five hours (POWER SAVING :
ON with nickel-metal hydride batteries)
Dimensions: 76 mm (W) x 128 mm (D) x 25 mm (H) / 2.99
(W) x 5.04 (D) x0.98 (H)
Weight:
100 g / 3.53 oz. (without batteries)
Included items:
Owners manual, two AA batteries
Options (sold separately):
AC adapter (
, 4.5V 500mA)
* Specifications and appearance are subject to change without
notice for improvement.
Ouvrir le botier
Pour ouvrir le botier du kaossilator 2S, retirez son cache arrire.
Louverture du cache arrire permet dinstaller/remplacer les
piles et/ou de mettre une carte de mmoire en place.
Liaisons
Enregistrement de boucle
Adaptateur secteur
(vendu sparment)
Fixer le cache
Micro
Formatage
ARP TIME: Si ARP TIME est rgl sur 100%, les notes sont joues
de faon lie (legato). Avec un rglage de -100%, les notes sont trs
brves et semblent coupes.
ASTUCE Si la dure est trop courte, certains programmes ne
produisent aucun son.
Casque
Prise DC 4.5V
Branchez ladaptateur secteur disponible en option ici.
Coupez lalimentation avant de brancher ladaptateur secteur.
Utilisez exclusivement ladaptateur secteur spcifi.
Prise PHONES (mini-jack stro)
Vous pouvez y brancher un casque.
Prise MIC IN (mini-jack stro)
Vous pouvez y brancher un micro.
Quand vous branchez un micro, un paramtre lcran vous permet
dactiver ou de couper lalimentation du micro via le connecteur
(plug-in power).
Choisissez le rglage convenant au micro utilis.
Jeu
Mise sous/hors tension du kaossilator 2S
Choisir un programme
Choisir la tessiture
Ajout:
Fonction Undo
Enregistreur matre
Les donnes que vous avez cres sur le kaossilator 2S peuvent
tre enregistres sur carte de mmoire.
1. Appuyez sur le bouton fnc pour afficher MASTER RECORDER.
2. Tapez sur le curseur de rglage pour lancer lenregistrement.
Un compteur dmarre.
3. Appuyez sur le bouton snd pour retourner au programme
slectionn, puis jouez sur linstrument.
4. Pour arrter lenregistrement, appuyez sur le bouton fnc pour
afficher MASTER RECORDER et tapez sur le curseur de
rglage.
ASTUCE Lenregistrement cesse automatiquement quand la carte
de mmoire est pleine ou quand lenregistrement atteint environ
deux heures.
ASTUCE Les donnes sont sauvegardes dans un fichier appel
KO2SREC??.WAV (?? reprsente 00~99), situ dans le dossier
RECORD??, au sein du dossier RECORD, compris dans le
dossier KO2.
Nutilisez pas lordinateur pour modifier les fichiers du dossier
RECORD.
Lecteur audio
Caractristiques techniques
Bornes:
Gehuse ffnen
Anschlsse
ffnen Sie das Gehuse des kaossilator 2S durch Entfernen der Rckwand. Nun knnen Sie Batterien einlegen
oder ersetzen und/oder eine Speicherkarte einsetzen.
Netzteil
(Sonderzubehr)
Riegeltaster
Schieben Sie die Laschen der Rckwand in die Aussparungen an der Oberseite des kaossilator 2S und drcken
Sie die Rckwand so weit, bis Sie ein Klicken hren.
Mikrofon
Kopfhrer
DC4.5V-Buchse
Schlieen Sie hier ein optionales Netzteil an.
Vor dem Anschluss des Netzteils mssen Sie das Gert ausschalten.
Verwenden Sie ausschlielich das dafr vorgesehene Netzteil.
PHONES-Buchse (Stereo-Miniklinke)
Hier kann ein Kopfhrer angeschlossen werden.
MIC IN-Buchse (Stereo-Miniklinke)
Hier kann ein externes Mikrofon angeschlossen werden.
Wenn Sie ein Mikrofon anschlieen, erscheint im Display ein
Symbol Sie knnen hierbei Plug-in Power aktivieren oder
deaktivieren. Whlen Sie jeweils die Einstellung, die sich fr
das angeschlossene Mikrofon eignet.
Spielen
Ersetzen der Batterien
Das Batteriesymbol informiert Sie ber den Ladezustand der Batterien. Erscheint sind die Batterien fast
erschpft. Ersetzen Sie die Batterien schnellstmglich
durch neue. Legen Sie zwei AA-Batterien ein und beachten Sie die Angaben im Batteriefach, um sie mit der richtigen Polung einzulegen.
Schalten Sie das Gert vor Auswechseln der Batterien aus.
Die Lautstrke des Lautsprechers richtet sich nach der Batteriespannung. Wenn die Batterien fast erschpft sind, knnen Sie nicht
mehr auf die Speicherkarte aufnehmen.
Erschpfte Batterien mssen so schnell wie mglich entfernt
werden. Entfernen Sie die Batterien auerdem, wenn Sie den kaossilator 2S lngere Zeit nicht verwenden mchten.
Mischen Sie niemals neue mit gebrauchten Batterien und verwenden Sie stets Batterien desselben Typs.
Tipp Die Laufzeit der Batterien kann mit der Energiesparfunktion
verlngert werden.
Tipp Wenn Sie Nickel-Metallhydrid-Batterien verwenden, mssen
Sie den BATTERY TYPE-Parameter des Utility-Mens auf NiMH stellen.
Energiesparfunktion
Speicherkarten
Formatieren
Kompatible Speicherkarten
Bitte lesen Sie sich die Gebrauchsanweisung der verwendeten Karte durch.
Tipp Eine Speicherkarte gehrt nicht zum Lieferumfang und muss
separat gekauft werden.
Loopaufzeichnung
Drcken Sie den Riegeltaster, um die Rckwand zu entriegeln. Schieben Sie den kaossilator 2S zu sich hin und
trennen Sie ihn von der Rckwand.
Halten Sie zum Einschalten des kaossilator 2S den Ein-/Ausschalter solange gedrckt, bis die Begrungsanzeige erscheint. Halten Sie zum Ausschalten des kaossilator 2S den
Ein-/Ausschalter solange gedrckt, bis die Abmeldeanzeige
WORKING... erscheint.
Berhren Sie beim Einschalten des kaossilator 2S weder Tasten noch
das Touchpad.
Setzen Sie bei eingeschaltetem kaossilator 2S weder die Speicherkarte ein, noch entnehmen Sie sie. Ansonsten drohen Datenverluste im kaossilator 2S oder der Speicherkarte. Schlimmstenfalls kann die Speicherkarte
so sehr beschdigt werden, dass Sie nicht mehr verwendet werden kann.
Reiben Sie mit dem Finger bers Touchpad oder tippen Sie
darauf.
Tragen Sie beim Bedienen des Touchpads keine Handschuhe.
Verwenden Sie keine harten Gegenstnde wie Griffel zur Bedienung
des Touchpads.
Durch Wahl einer Tonart und Tonleiter, knnen Sie den kaossilator 2S sehr musikalisch auf dem Touchpad spielen. Rufen
Sie mit der fnc-Taste (function) den entsprechenden Parameter
auf und bearbeiten Sie dessen Wert mit dem VALUE-Slider.
KEY: Hiermit whlen Sie den Grundton der Skala. Die Verfgbarkeit richtet sich nach der Einstellung des gewhlten Programms. Siehe daher auch die Programmliste.
Bei bestimmten Einstellungen hren Sie nichts bzw. nur Rauschen.
SCALE: Hiermit whlen Sie die Skala (Tonleiter), die auf dem
Touchpad gespielt werden kann. Das Display zeigt den Notennamen an. Die Verfgbarkeit richtet sich nach der Einstellung des gewhlten Programms. Siehe daher auch die Programmliste.
Tonumfang festlegen
Die NOTE RANGE-Funktion legt den Tonumfang des Touchpads fest. Rufen Sie mit der fnc-Taste (function) den entsprechenden Parameter auf und bearbeiten Sie dessen Wert mit
dem VALUE-Slider.
Program: Der werksseitig eingestellte, frs jeweilige Programm optimale Tonumfang wird verwendet.
14 Octaves: Der Tonhhenbereich betrgt 14 Oktaven.
Max Range: Der Tonumfang wird auf den Hchstwert eingestellt.
Tipp Der tatschliche Max Range-Bereich richtet sich nach dem gewhlten Program.
Bei bestimmten Einstellungen hren Sie nichts bzw. nur Rauschen.
Whlen Sie mit der fnc-Taste den Parameter aus, den Sie bearbeiten wollen, und stellen Sie dessen Wert mit dem VALUESlider ein.
Notendauer festlegen
ARP TIME: Wenn ARP TIME auf 100% steht, werden die
Noten als Legatos wiedergegeben. Betrgt die Einstellung
-100%, klingen die Noten extrem kurz an, als ob sie unterbrochen wrden.
Tipp Bei zu geringen Einstellungen ist bei manchen Programmen eventuell nichts zu hren.
Spontanes Overdubbing
Overdubbing:
Looplnge festlegen
Whrend der Aufzeichnung eines Overdubs [ (REC)Taste leuchtet rot], knnen bereits aufgezeichnete Daten
durch Gedrckt halten der new-Taste partiell gelscht
werden. Solange Sie die new-Taste drcken, werden die
Loop-Daten gelscht.
Tipp Wenn Sie die new-Taste gedrckt halten, wird der vorher
aufgezeichnete Loop so lange gelscht, wie Sie die new-Taste gedrckt halten, so dass Sie ihn mit einem neuen Loop ersetzen knnen.
Tipp Das Bearbeiten von Loops ist nur fr Overdubs mglich. Der
ursprnglich aufgezeichnete Loop kann nicht partiell gelscht werden.
Undo-Funktion
Finalisieren
Master-Recorder
Alles, was Sie mit dem kaossilator 2S spielen, kann auf
eine Speicherkarte aufgenommen werden.
1. Drcken Sie die fnc-Taste, bis im Display MASTER
RECORDER angezeigt wird.
2. Tippen Sie den VALUE-Slider an, um die Aufnahme
zu starten. Das Zhlwerk beginnt zu arbeiten.
3. Kehren Sie mit der snd-Taste ins gewhlte Programm
zurck und spielen Sie.
4. Drcken Sie die fnc-Taste, damit im Display MASTER RECORDER angezeigt wird und tippen Sie den
VALUE-Slider erneut an, um die Aufnahme anzuhalten.
Tipp Wenn die Speicherkapazitt der Karte erschpft ist bzw. wenn
Sie mehr als 2 Stunden aufnehmen, hlt die Aufnahme automatisch
an.
Tipp Die Daten werden in einer Datei namens KO2REC??.WAV
im RECORD??-Ordner des RECORD-Ordners im KO2-Ordner gesichert (?? vertritt eine Zahl im Bereich 0099).
ndern Sie die Namen der Dateien im RECORD-Ordner
niemals mit Ihrem Computer.
Audio-Player
Der kaossilator 2S kann die vom Master-Recorder aufgenommenen und auf einer Speicherkarte gespeicherten
Audiodaten und andere dort gespeicherte Audiodaten
wiedergeben.
1. Drcken Sie die fnc-Taste, bis im Display AUDIO
PLAYER angezeigt wird und tippen Sie den VALUESlider an.
2. Whlen Sie mit dem VALUE-Slider die Datei, die Sie
abspielen mchten.
3. Drcken Sie die snd-Taste, um die Wiedergabe anzuhalten und zur Programmwahl-Anzeige zurckzukehren.
Untersttzte Dateiformate
Stereo-WAV-Dateien im 16-Bit/44.1kHz/48kHz-Format
Technische Daten
Anschlsse: MIC IN-Buchse (Stereo-Miniklinkenbuchse), PHONES-Buchse (Stereo-Miniklinkenbuchse), DC4.5V-Buchse
Stromversorgung:
Zwei AA-Batterien (Alkali oder Nickel-Metallhydrid)
Batterielaufzeit:
5 Stunden (POWER SAVING-Parameter
: ON und Nickel-Metallhydridbatterien)
Abmessungen:
76 mm (B) x 128 mm (T) x 25 mm (H)
Gewicht:
100 g (ohne Batterien)
Lieferumfang: Bedienungsanleitung, zwei AA-Batterien
Optionen (getrennt erhltlich):
Netzteil (
, 4,5 V 500 mA Gleichspannung)
* nderungen der technischen Daten und des Designs ohne vorherige
Ankndigung vorbehalten.
2/2
SCALE LIST
-1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Scale Name
(Off )
Chromatic
Ionian
Dorian
Phrygian
Lydian
Mixolydian
Aeolian
Locrian
Harmonic minor
Melodic minor
Major Blues
minor Blues
Diminished
Combination Diminished
Major Pentatonic
minor Pentatonic
Raga Bhairav
Raga Gamanasrama
Raga Todi
Arabic
Spanish
Gypsy
Egyptian
Hawaiian
Bali Island Pelog
Japanese Miyakobushi
Ryuku
Chinese
Bass Line
Whole Tone
minor 3rd Interval
Major 3rd Interval
4th Interval
5th Interval
Octave
Scale [Key C]
C, D, D, E, E, F, G, G, A, A, B, B
C, D, E, F, G, A, B
C, D, E, F, G, A, B
C, D, E, F, G, A, B
C, D, E, F , G, A, B
C, D, E, F, G, A, B
C, D, E, F, G, A, B
C, D, E, F, G, A, B
C, D, E, F, G, A, B
C, D, E, F, G, A, B
C, D, E, E, G, A
C, E, F, G, G, B
C, D, E, F, F , G , A, B
C, D , E , E, F , G, A, B
C, D, E, G, A
C, E, F, G, B
C, Db, E, F, G, A, B
C, D, E, F , G, A, B
C, D , E , F , G, A, B
C, D, E, F, Gb, A, B
C, D, Eb, E, F, G, A, B
C, D, E, F , G, A, B
C, D, F, G, B
C, D, E, G, A
C, D, E, G, A
C, D, F, G, A
C, E, F, G, B
C, E, F , G, B
C, G, B
C, D, E, G, A, B
C, E, G, A
C, E, A
C, F, B
C, G
C
No.
BS.051
BS.052
BS.053
BS.054
BS.055
BS.056
BS.057
BS.058
BS.059
BS.060
BS.061
BS.062
BS.063
BS.064
BS.065
CH.066
CH.067
CH.068
CH.069
CH.070
CH.071
CH.072
CH.073
CH.074
CH.075
CH.076
CH.077
CH.078
CH.079
CH.080
CH.081
CH.082
CH.083
CH.084
CH.085
CH.086
CH.087
CH.088
CH.089
CH.090
SE.091
SE.092
SE.093
SE.094
SE.095
SE.096
SE.097
SE.098
SE.099
SE.100
Program Name
Feed Y Bass
Organ Bass
Simple Bass
MG Bass
Square Bass
Fat Bass
Slap Bass
Chorus Bass
Bad Bass
Big Bass
Kick Bass
Acid Bass
Boost Bass
Ring Bass
Fall Bass
Pulse Code
Tech Kode
Pump Chord
Guitar Strum
Scale Chord
kasCode
Dream Sine
OSCode
Piano Chord
HPF Code Seq
EP Chord
PWM Chord
Electro Stab
Pad Chord
Arpeggio Down
Arpeggio Alt
Power Chord
Side Chain
Filter Chord
Wurly Chord
Guitar Chord
2039
BPF Chord
Sine Chord
Phaser Chord
Pump Noise
Disco Siren
Guitar Elements
Itch Noiz
Resonate
Helicopter
Orch Hit
Rise/Fall
HPF Square
Kaoss Drone
X-Assign
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Pitch
Note
Note
Note
Note
Pitch
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Cutoff
LFO Speed
Sample Select
Note
Cutoff
Pan
Pitch
Pitch
Note
Cutoff
Y-Assign
Scale
Flanger Depth
3rd Percussion
Cutoff
Cutoff
Cutoff
Cutoff
Decay Time, Mute
Cutoff
LFO Depth
Cutoff
Decay Time
Distortion
Cutoff
Cutoff
Cutoff
Cutoff
Attack Time
Chord (min - Maj)
Chord (min7 - Maj7)
Level
Cutoff
Attack Time, Decay Time
Cutoff
Chord (min7 - Maj7)
LFO Depth
Chord (min7 - Maj7)
Attack Time, Decay Time
Vibrato
Cutoff
Chord (min7 - Maj7)
Chord (min - Maj)
Sound Character
Chord (min79 - Maj79), Cutoff
Cutoff
Chord (min7 - Maj7)
Decay Time, Mute
Mix Balance
Cutoff
Octave
LFO Speed
LFO Depth
Sound Character
Level
LFO Depth
LFO Depth & Speed
Propeller Speed
Level
Rise, Fall
Cutoff
Feedback
SE
Scale
DRUM
Y-Assign
Cutoff
Cutoff
Reverb Depth
Attack Time, Decay Time
OSC Sync Pitch
Decay Time
Pitch EG Time
Cutoff
Ring Mod Pitch
Cutoff
Cutoff
Octave
Cutoff
OSC Pulse Width
Cutoff
Cutoff
Portamento
Decay Time
Cutoff
Cutoff
Ambient Depth, Vibrato
Portamento
Level
OSC Sync Pitch
Cutoff
Velocity
Breath Pressure
Velocity
2nd Strings Level
Velocity
Chord (Maj)
LFO Speed
Sound Character
2nd Reed Level
Decay Time, Mute
Resonance
Cutoff
Octave
LFO Depth
Cutoff
Attack Time
Cutoff
Octave
LFO Speed
LFO Speed
Velocity
LFO Depth
Cutoff
Cutoff
Formant
PATTERN
X-Assign
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note, LFO Speed
Note
Note
Note
Note
Note
Note
Note
Note
Note
Note
BASS
Program Name
Wide Dist Lead
Pulse Verb
Unison Saw
Reverse Sine
Bleep Lead
Air Spectrum
Paz Square
Acid Rez Lead
Ring Flutter
Synth Lead
PWM Lead
8bit Square
Syn Decay
5th Lead
Square Lead
Unison Lead
SinePortamento
Square Bell
Soft Lead
Orange Lead
Ambient Lead
Mini Lead
Tell Min
Sync Lead
Unison Sweep
Ray EP
Trumpet
Kalimba
Duo Strings
Piano
Tape Flute
Didgeridoo
Dist Guitar
Harmonica
Phase Clav
House Bass
Duck Bass
Hoover Bass
Dist Bass
Wobble Bass
Slow Bass
Squ Rez Bass
Pure Saw
Motion Bass
Auto Oct Bass
Elec Bass
XMod Bass
Synth Bass
Valve Bass
Talkin Bass
CHORD
No.
LD.001
LD.002
LD.003
LD.004
LD.005
LD.006
LD.007
LD.008
LD.009
LD.010
LD.011
LD.012
LD.013
LD.014
LD.015
LD.016
LD.017
LD.018
LD.019
LD.020
LD.021
LD.022
LD.023
LD.024
LD.025
AC.026
AC.027
AC.028
AC.029
AC.030
AC.031
AC.032
AC.033
AC.034
AC.035
BS.036
BS.037
BS.038
BS.039
BS.040
BS.041
BS.042
BS.043
BS.044
BS.045
BS.046
BS.047
BS.048
BS.049
BS.050
SE
BASS
ACOUSTIC
LEAD
PROGRAM LIST
No.
SE.101
SE.102
SE.103
SE.104
SE.105
SE.106
SE.107
SE.108
SE.109
SE.110
DR.111
DR.112
DR.113
DR.114
DR.115
DR.116
DR.117
DR.118
DR.119
DR.120
DR.121
DR.122
DR.123
DR.124
DR.125
PT.126
PT.127
PT.128
PT.129
PT.130
PT.131
PT.132
PT.133
PT.134
PT.135
PT.136
PT.137
PT.138
PT.139
PT.140
PT.141
PT.142
PT.143
PT.144
PT.145
PT.146
PT.147
PT.148
PT.149
PT.150
Program Name
Sync Random
Noise Filter
Metal
Siren
Random
Beam Saber
Synth Looper
Ring Mod SFX
Sweep
Drop
House Kit
Disco Kit
Techno Kit
Minimal Kit
HipHop Kit
Breakbeat Kit
Dubstep Kit
Rock Kit
Doncamatic Kit
Electric Kit
Tom Kit
Clap Kit
Conga Kit
Cymbal Kit
Reverse Kit
House 1
House 2
Deep House
Electro House
Techno
Minimal 1
Minimal 2
HipHop 1
HipHop 2
Breaks 1
Breaks 2
Dubstep 1
Dubstep 2
Drum'n'Bass
Rock 1
Rock 2
Disco
Bossa
Doncamatic
Lofi Beatz
Elec Perc
Backbeat
NoKick
HiHat
Conga
X-Assign
Note
Cutoff
Pitch
LFO Speed
Pitch
Mod Pitch
Cutoff, Looper Speed
Pitch
Pitch, Pan
Cutoff
Sample Select
Sample Select
Sample Select
Sample Select
Sample Select
Sample Select
Sample Select
Sample Select
Sample Select
Sample Select
Pitch
Sample Select
Sample Select
Sample Select
Pitch
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Pattern Variation
Y-Assign
OSC Sync Pitch
Resonance
LFO Depth
LFO Depth
LFO Depth
Mod Depth
Looper, Noise Level
LFO Depth
LFO Speed
Impulse Speed
Cutoff
Level
Level, Decimator
Delay Depth
Level
Level, Reverb Depth
Cutoff
Level, Comp Depth
Level, Reverb Depth
Grain Depth
Sample Select
Level, Reverb Depth
Level, Reverb Depth
Level
Sample Select
Reverb LFO Depth
Kick Decay Time
Delay Depth
Decimator
Delay Depth
Kick Decay Time
Kick Level, Reverb Depth
Snare Sample Select
Sample Select
Cutoff
Decimator
Reverb Depth
Reverb, Grain Depth
Kick Decay Time, Cutoff
Reverb Depth
HiHat Sample Select
Cutoff
Level, Rim Level
HiHat Decay Time
Kick Level, Decimator
Sample Select
Cutoff
Delay Depth
HiHat (Close - Open), Level
Level
Scale
Gracias por la adquisicin del procesador de efectos dinmicos Korg kaossilator 2S. Para ayudarle a sacar el mximo provecho de su nuevo
instrumento, lea cuidadosamente este manual.
Controles y conectores
1. Micrfono interno
El kaossilator 2S puede grabar sonidos con su micrfono externo,
que se controla mediante el botn mic on/off (activacin/desactivacin del micro).
NOTA Para evitar la realimentacin, el altavoz interno se silencia automticamente cuando se
utiliza el micrfono interno.
2. Pantalla de visualizacin
La pantalla OLED muestra el programa seleccionado, el tempo y
otras informaciones. La seccin inferior funciona como gua del
controlador deslizante.
3. Botn snd (sonido)
Pulse este botn para que aparezca la pantalla de seleccin de
programas.
4. Botn e indicador arp (arpegiador)
Utilice este botn para activar y desactivar el arpegiador y para
acceder a los parmetros del arpegiador. El indicador se iluminar
cuando el arpegiador est en uso o cuando se estn configurando
los ajustes. Por favor, remtase a la seccin Uso del arpegiador
para obtener ms informacin sobre esta funcin.
5. Botn mic on/off (activacin/desactivacin del micro)
Utilice este botn para controlar el micrfono interno o cualquier
micrfono conectado al conector MIC IN. Pulse el botn mic on/
off para activar el micrfono. En la pantalla aparecer la indicacin
Mic Enable (micro activado). Pulse el botn mic on/off una segunda vez para desactivar el micrfono (desaparecer la indicacin).
Mantenga pulsado este botn mientras utiliza los botones Volume
para ajustar el nivel de entrada.
6. Controlador deslizante
Con el controlador deslizante puede seleccionar programas y
editar parmetros con la punta del dedo. Los valores cambian sin
problemas con solo acariciar el controlador deslizante con el dedo.
Para cambiar un valor en incrementos de un paso, toque cualquiera
de los extremos del controlador deslizante.
Utilice solo la punta del dedo para accionar el controlador deslizante. No utilice objetos
duros ni afilados. El controlador deslizante puede no funcionar si intenta utilizarlo con cualquier cosa
que no sea su dedo o si lo hace con guantes puestos.
7. Panel tctil
El panel tctil sirve para controlar con la punta del dedo las
interpretaciones del kaossilator 2S. Para obtener ms informacin,
remtase a la seccin Reproduccin e interpretacin mediante el
panel tctil.
8. Botn fnc (funcin)
Pulse repetidamente este botn para seleccionar el elemento del
men de configuracin que desee ajustar.
1
2
3
Micrfono interno
5
6
Panel tctil
15
Pantalla de visualizacin
Botn snd
Controlador deslizante
Botn fnc
Indicador BPM
Botn de encendido
Botn new
Botones Volume
8
9
10
11
12
Botn (grabacin)
13
Botn
14
(reproduccin)
Altavoz interno
Botn de bloqueo
16
NOTA Mantenga pulsado el botn snd mientras pulsa el botn fnc para desplazarse por los elementos del
men de configuracin en orden inverso.
9. Indicador BPM (tempo)
El indicador BPM (tempo) parpadear a tiempo con el tempo seleccionado en ese momento.
10. Botn de encendido
Este botn enciende y apaga el kaosscilator 2S. Remtase a la seccin
Encender y apagar el kaossilator 2S para obtener ms informacin.
11. Botn new (nuevo)
Remtase a las secciones Borrado parcial de una frase grabada y
Borrado completo de una frase para obtener ms informacin.
12. Botones Volume (volumen)
Utilice los botones Volume para ajustar el volumen de los auriculares o
del altavoz interno. Cuando el micrfono est activado, aqu se ajusta el
volumen del sonido de entrada.
13. Botn (grabacin)
Remtase a la seccin Grabacin de bucles para obtener ms informacin.
14. Botn (reproduccin)
Remtase a la seccin Grabacin de bucles para obtener ms informacin.
15. Altavoz interno
El sonido creado por las interpretaciones hechas en el kaossilator 2S
puede escucharse a travs del altavoz interno o de los auriculares.
Cuando se conecten unos auriculares al terminal PHONES, se silenciar
el altavoz interno.
NOTA Con algunos programas, puede que el volumen sea bajo o difcil de apreciar.
16. Botn de bloqueo
Pulsando el botn de bloqueo se libera la cubierta posterior para poder
instalar las pilas y la tarjeta de memoria. Remtase a la seccin Apertura de la carcasa para obtener ms informacin.
Tempo
Nmero de programa
Nombre de programa
Gua de la barra deslizante de valor
Pantalla de seleccin de programas
Elemento
Valor
Gua de la barra deslizante de valor
Pantalla de configuracin
Pulse el botn fnc para avanzar por la lista de elementos del men de configuracin. Si mantiene pulsado el botn snd, cada vez pulse el botn
fnc se desplazar un elemento hacia atrs en la lista.
Pgina
Elemento
P-1/14
P-2/14
P-3/14
P-4/14
P-5/14
P-6/14
P-7/14
P-8/14
BPM
KEY
SCALE
NOTE RANGE
ARP PATTERN
ARP TIME
ARP SWING
LOOP LENGTH
Contenido
Valor predeterminado
Especifica el tempo para la reproduccin del arpegiador, etc.
120.0
Especifica la nota tnica de la escala.*1
C (do)
Especifica la escala asignada al panel tctil.
Ionian (jnica)
Especifica el rango de octavas que se pueden tocar en el panel tctil.*1
Program (programa)
Especifica el patrn de arpegio.
Type:01 (tipo: 01)
Especifica la duracin de las notas producidas por el arpegiador.*1
000%
Ajusta la cadencia del arpegiador.
OFF (desactivado)
Especifica la longitud de la frase del bucle.
4 Beat (4 tiempos de
comps)
Carga los datos de bucle grabados por el kaossilator 2S.
-Carga un archivo externo como datos de bucle.
-Convierte los datos del grabador de bucles en archivos WAV, de modo que ABLETON
puedan ser editados con un software DAW.
Graba en la tarjeta de memoria las interpretaciones ejecutadas en el
-kaossilator 2S.
Reproduce datos de audio contenidos en la tarjeta de memoria.
-Toque en el centro del controlador deslizante para introducir las seleccio- -nes del men UTILITY (utilidades)
Pulse el botn fnc repetidamente hasta que aparezca UTILITY, y despus toque sobre el controlador deslizante para seleccionar un elemento del
men de utilidades.
Pgina
U-1/10
U-2/10
U-3/10
Elemento
DATE
BATTERY TYPE
POWER SAVING
U-4/10
U-5/10
U-6/10
U-7/10
U-8/10
U-9/10
P-10/10
Contenido
Ajusta la fecha y la hora del reloj interno. Esta informacin se utiliza para fechar los archivos.
Especifica el tipo de pilas utilizadas.
Reduce el consumo de energa del kaossilator 2S limitando la potencia de salida del altavoz, lo
que alarga la duracin de las pilas.
Especifica si el kaossilator 2S se apagar automticamente (despus de cuatro horas). *2
Ajusta el brillo de la pantalla de visualizacin. *3
Especifica el tipo de micrfono conectado.
Verifica si la tarjeta de memoria insertada puede utilizarse con el kaossilator 2S.
Comprueba y formatea la tarjeta de memoria.
Calibra la regin activa del panel tctil y del controlador deslizante.
Actualiza el software de sistema del kaossilator 2S. Para obtener ms informacin sobre la
actualizacin del sistema, consulte el sitio web de Korg.
*1 La disponibilidad depende del programa. Dependiendo de los ajustes, puede que no se escuche sonido o se produzca ruido.
*2 Aunque esta funcin est activada, el kaossilator 2S no se apagar automticamente si est entrando audio.
*3 El uso prolongado de ajustes altos afectar a la vida til de la pantalla de visualizacin.
NOTA Despus de seleccionar este ajuste, volver a aparecer la pantalla de programa si no se ejecuta ninguna operacin durante un rato. Pulsando el botn snd se vuelve inmediatamente a la pantalla de programa.
Apertura de la carcasa
Conexiones
Para editar los parmetros del arpegiador, pulse el botn fnc para acceder
al parmetro que desee editar y utilice el controlador deslizante para
ajustar el valor.
Para abrir la carcasa del kaossilator 2S hay que quitar la cubierta posterior. Una vez abierta, puede instalar o sustituir
las pilas, y/o instalar la tarjeta de memoria.
ARP TIME: Si se ajusta ARP TIME en 100%, las notas se ejecutarn ligadas (en legato). Si el ajuste es -100%,, la duracin ser extremadamente
corta y parecer que las notas se interrumpen.
NOTA Con ajustes cortos, es posible que en algunos programas no se produzca sonido.
Micrfono
Fijacin de la cubierta
Auriculares
Jack DC 4.5V
Formateo
Interpretacin
Encender y apagar el kaossilator 2S
Para encender el kaossilator 2S, mantenga pulsado el botn de encendido hasta que aparezca la pantalla de inicio. Para apagar el kaossilator
2S, mantenga pulsado el botn de encendido hasta que aparezca la
pantalla de cierre WORKING....
No toque los botones ni haga nada con el panel tctil mientras se enciende el kaossilator 2S.
No inserte ni saque la tarjeta de memoria mientras el kaossilator 2S est encendido. Si lo hace,
podra daar los datos contenidos en el kaossilator 2S o en la tarjeta. Adems, tambin podra daar la
tarjeta de memoria y convertirla en inservible.
Eleccin de un programa
Grabacin de bucles
El kaossilator 2S puede grabar audio de forma rpida (utilizando un
programa interno o desde una fuente externa) y despus transformar esa
grabacin en un bucle. Se pueden grabar sobregrabaciones adicionales. La
funcin de grabacin de bucles puede capturar hasta dos compases con
medida 4/4 o hasta un total de ocho tiempos de comps.
Dado que el kaossilator 2S graba directamente en la tarjeta de memoria, es necesario disponer de una.
Grabacin de un bucle
Sobregrabacin:
La accin de finalizar crea archivos WAV para cada bucle y sobregrabacin. Estos archivos se pueden editar con un software de
edicin de ondas de sonido en un ordenador, o se pueden cargar
como pistas individuales en un software DAW (estacin de audio
digital multipista).
NOTA Los archivos WAV creados con el kaossilator 2S estn en formato BWF (Broadcast Wave
File) con informacin de tiempo. Si se utiliza un software DAW compatible con BWF, los datos se
pueden usar como un archivo con un eje de tiempos uniforme, incluso aunque no estn finalizados.
1. Pulse el botn fnc hasta que la pantalla indique FINALIZE
(finalizar).
2. Utilice el controlador deslizante para seleccionar una opcin.
MATERIAL: Solo se finaliza el archivo de material.
2MIX: Solo se finalizan los archivos 2-mix (mezcla en dos
canales).
BOTH: Se finalizan el archivo de material y los archivos 2-mix.
ABLETON: Convierte los datos del grabador de bucles en un
set de Ableton Live.
3. Utilice el controlador deslizante para seleccionar OK (aceptar).
Comenzar el proceso de finalizacin.
Los datos finalizados se graban en la carpeta 2MIX, en la
carpeta MATERIAL y en la carpeta LIVE que se encuentran
dentro de la carpeta KO2S/DATA/ L???/FINALIZE.
NOTA Esta operacin puede tardar un poco, dependiendo del tamao de los datos de bucle.
NOTA El estado de datos ms reciente, incluyendo los resultados de las operaciones de deshacer
(Undo) y rehacer (Redo), es el que se graba en la carpeta de finalizacin cuando se ejecuta la accin
de finalizar. Esto borra los resultados (los archivos) de cualquier operacin de finalizacin anterior.
Si es necesario, deber hacer una copia de seguridad de los datos anteriores antes de ejecutar la
operacin.
Grabador maestro
Las interpretaciones que usted cree en el kaossilator 2S pueden
grabarse en la tarjeta de memoria.
1. Pulse el botn fnc hasta que la pantalla indique MASTER RECORDER (grabador maestro).
2. Toque sobre el controlador deslizante para empezar a grabar.
Se iniciar un contador.
3. Pulse el botn snd para volver al programa seleccionado y
comenzar la interpretacin.
4. Para detener la grabacin, pulse el botn fnc para hacer que la
pantalla indique MASTER RECORDER y toque sobre el controlador deslizante.
NOTA La grabacin terminar automticamente cuando no quede ms espacio libre en la tarjeta
de memoria o cuando el tiempo de grabacin alcance aproximadamente unas dos horas.
NOTA Los datos de audio se guardan como un archivo llamado KO2SREC??.WAV (?? is 0099) en
la carpeta RECORD??, situada dentro de la carpeta RECORD que a su vez est dentro de la carpeta
KO2S.
No utilice un ordenador para editar los archivos que hay en la carpeta RECORD.
Reproductor de audio
Especificaciones
Conectores:
Alimentacin: