Professional Documents
Culture Documents
ELE Bearing Capacity Penetrometer
ELE Bearing Capacity Penetrometer
Bearing capacity
29
Bearing Capacity
The design of foundations is a prerequisite of economic
design and construction. In order to guard against shear
failure and unacceptable ground movements due to loading,
it is often necessary to determine the ground bearing
capacity.
Ordering Information
EL29-3720
Dynamic Cone Penetrometer supplied complete with all
necessary tools and assembly/ operating instructions. Assembled
height 1965 mm, assembled weight 20 kg.
Spare
EL29-3720/10
Replacement Cone
Pocket Penetrometer
A lightweight device for determining the approximate unconfined
compressive strength and the estimation of shear strength, it can
also be used to classify cohesive soils in terms of consistency.
The stainless steel plunger is pushed into the soil until the
penetration mark is reached.The equivalent unconfined
compressive strength of the soil can be read in kgf/cm2 or tons/ft2
from the maximum load indicator provided.
Important: the readings obtained from the pocket penetrometer
do not replace laboratory test results due to the fact that a small
area penetration test is inherently liable to give misleading results.
The instrument should not be used for obtaining foundation design
data.
Specification
Dimensions
Range
Scale divisions
Load piston
Carrying case
Weight
19 x 162 mm
0.25 to 4.5 kg/cm2
0.25 kg/cm2
6 mm dia, stainless steel
Canvas, belt-loop style
198 g
Ordering Information
EL29-3729
ELE Pocket Penetrometer Weight 80 g
65
29
Soil Testing
Bearing capacity
Pressure System
Specification
Specification
Hose
Proving ring
Dial indicator
Shaft
Extension rod
Cone
Weight
1 kN capacity
Brake type
19 mm dia x 457 mm length
graduated at 150 mm
19 mm dia x 914 mm length
graduated at 150 mm
30
5.4 kg
Ordering Information
EL29-3739
Proving Ring Penetrometer
Loading jack
Pump
Gauge
Weights
Ordering Information
EL29-3794
500 kN Hydraulic Jack
EL29-3808
Hand-operated Pressure System
Bearing Plates
Manufactured from machined steel plate with a finished thickness
exceeding 25 mm.The plate has concentric markings on one face.
All plates are supplied with 2 lifting eyes except for EL29-3826 and
EL29-3850.
Ordering Information
Model no.
Description
Weight
EL29-3826
EL29-3830
EL29-3834
EL29-3838
EL29-3842
EL29-3846
EL29-3850
3.6 kg
10 kg
3.6 kg
33 kg
56 kg
56 kg
18.6 kg
Ordering Information
EL29-3818
Datum Bar Assembly manufactured from steel, with steel feet
and 4 dial gauge supports. Overall length 2.4 metres. Supplied
without dial gauges. Weight 9 kg
EL29-3822
Dial Gauge 50 mm travel x 0.01 mm divisions, complete with
adjustable clamp assembly. Four dial gauges required. Weight 1.4 kg
66