Professional Documents
Culture Documents
Virtual Manufacturing
Virtual Manufacturing
com
1. INTRODUCTION
Manufacturing is defined as the making of articles in an industry.
Manufacturing is the heart and soul of an industry. For an industry to excel in its field, the
company must possess the latest technology in manufacturing. One such technology is
Virtual Manufacturing.
www.SeminarsTopics.com
Virtual Environment
Output devices:
Graphics, Sound, Tactile
Network
Computer
Input devices:
Head/eye/hand tracking
Person
www.SeminarsTopics.com
www.SeminarsTopics.com
be an integrated, synthetic manufacturing environment exercised to enhance all levels of
decision and control.
www.SeminarsTopics.com
VM utilizes nonlinear finite element analysis technologies to provide
detailed information about a product, which is than used for optimization of factors such
as manufacturability, final shape, residual stress and life-cycle estimations. At the core of
VM lies nonlinear FEA technology.
A virtual part in a machining center. One can use such concept to effectively
debug and verify a process planning.
www.SeminarsTopics.com
These three different types of VM have the following characteristics:
for
optimizing
manufacturing
manufacturing systems.
DESKTOP AR
processes
and
improving
www.SeminarsTopics.com
www.SeminarsTopics.com
www.SeminarsTopics.com
3. STRUCTURE OF VIRTUAL
MANUFACTURING PROCESS
Each VM process is an ordered collection of individual steps called virtual
manufacturing operations (VMO). Each VMO changes the attributes of the starting
virtual work part, and requires a combination of a virtual machine tool and virtual
tooling. The VMO is essentially a set of physics-based process models derived from first
principles. Different VMOs could be constructed based on different principles, i.e., a
virtual machining operation, a virtual assembly operation, a virtual inspection operation,
etc. The virtual machining operation is defined as a set of physics-based analytical and
numerical models that describe the phenomena of chip formation zone including the
mechanics and thermodynamics of the process, tribology, and tool wear. The virtual
machining operation, as part of the virtual manufacturing process, communicates with the
other objects in the immediate vicinity of the VM system (the virtual machine tool,
virtual prototyping system, and virtual inspection system) by exchanging information as
shown in Figure 2.
The virtual machining operation interfaces with the VP system. When the VP
system interacts with the VMO as in Figure 2, it provides VMO with information about
the geometrical and material specifications of the work part. In return, the VMO will send
9
www.SeminarsTopics.com
back to the VP system information about the manufacturability of the prototype.
Additional information may be exchanged between VP and VMO to enhance design and
manufacturing functions, which would in essence emulate the Design Manufacturability
related activities. Also, VP will interact with the other objects in the virtual
manufacturing, for example the virtual machining tool and virtual inspection system, to
provide and receive information on the various aspects involved. Another object of the
subsystem illustrated in figure 2 is the virtual machine tool. A virtual machine tool is a
computer- based subsystem of the VM system exercised to improve the machine tool
characteristics like dimensional accuracy, productivity, and machining performance. The
virtual machining operation provides the virtual machine tool with information about the
cutting forces and temperatures required to calculate the elastic and temperature
deformations. In return, the VMO receives input on the machining parameters, tool
geometry and materials, and the spatial positions of the virtual work part and cutting tool.
Additional information may be exchanged between virtual machine tool and virtual
machining operation to enhance machining functions and machine functionalities.
The virtual inspection system is an object that is created based on the real
inspection units used in the manufacturing process. For example, the virtual inspection
station will have a virtual coordinate measuring machine with virtual probes and a virtual
fixture to hold the virtual work part. The virtual inspection unit contains metrology model
that simulates the working principle of the measuring device, like the CMM machine,
optical comparator, etc., kinematic models to simulate the working of the machine, error
generation models, and calibration models which are exercised to measure the virtual
work part. Just like the other system elements, the virtual inspection unit communicates
with the other objects. It receives information about the real geometry of the virtual work
part as calculated by superimposing the ideal geometry provided by the VP system with
the error envelope created during the VMO and checks the work part geometry for
compliance with the geometrical tolerances. The information generated by the virtual
inspection unit is then fed back to the virtual machine tool and the virtual machining
operation to compensate for the error or change the machining conditions to ensure that
the work part produced is within design specifications. In addition, the virtual inspection
system may incorporate a quality module to facilitate the statistical process control.
10
www.SeminarsTopics.com
abrasion.
The outcomes of the wear model are the volumetric tool wear and the width of
wear land (VB) defined as the cutting time required for the cutting tool to develop a flank
wear land of width VB, the so-called wear criterion.
11
www.SeminarsTopics.com
We assume that the proposed design is available as a solid model, along with
the tolerance and surface finish information as attributes of various faces of the solid
model. We assume we have information about the available machining operations,
including the process capabilities, dimensional constraints, etc. As shown on the next
page, our approach is to generate alternative interpretations of the part as collections of
machining features, map these interpretations into operation plans, and evaluate the
manufacturability of each operation plans. The ultimate goal of the IMACS project is to
provide tools for manufacturability analysis as part of the CAD systems used by
designers. We believe our work will help designers design products that are easier to
12
www.SeminarsTopics.com
manufacture. This will reduce the need for redesign, resulting in reduced lead time and
product cost. In addition, it will help to speed up the evaluation of new product designs in
order to decide how or whether to manufacture them. Such a capability will be especially
useful in flexible manufacturing systems, which need to respond quickly to changing
demands and opportunities in the marketplace.
Manufacturability Analysis
Given a computerized representation of the design (i.e. a solid model) and a
set of manufacturing resources, the automated manufacturability analysis problem can be
defined as follows:
1. Determine whether or not the design attributes (e.g., shape, dimensions,
tolerances, surface finishes) can be achieved.
2. If the design is found to be manufacturable, determine a manufacturability rating,
to reflect the ease (or difficulty) with which the design can be manufactured.
13
www.SeminarsTopics.com
3. If the design is not manufacturable, then identify the design attributes that pose
manufacturability problems.
In general, a design's manufacturability is a measure of the effort required to
manufacture the part according to the design specifications. Our approach to measuring
manufacturability is to estimate the manufacturing time and cost. Since all manufacturing
operations have measurable time and cost, these can be used as an underlying basis to
form a suitable manufacturability rating. Ratings based on time and cost can easily be
combined into a overall rating. Moreover, they present a realistic view of the difficulty in
manufacturing a proposed design and can be used to aid management in making make-orbuy decisions.
In a machining operation, a cutting tool is swept along a trajectory, and
material is removed by the motion of the tool relative to the current workpiece. The
volume resulting from a machining operation is called a machining feature.
More specifically, their approach involves the following steps :1. Build the set of all potential machining features by identifying various features
which can be used to create the part from the stock. Each of these features represents a
different possible machining operation which can be used to create various surfaces of the
part.
2. Repeat following steps until every promising feature-based model (FBM) has been
examined :A. Generate a promising FBM from the feature set. An FBM is a set of
machining features that contains no redundant features and is sufficient to create the
part. We consider an FBM unpromising if it is not expected to result in any operation
plans better than the ones which have already been examined.
B. Do the following steps repeatedly, until every promising operation plan
resulting from the particular FBM has been examined :i) Generate a promising operation plan for the FBM. This operation plan
represents a partially ordered set of machining operations. We consider an operation plan
to be unpromising if it violates any common machining practices.
ii) Estimate the achievable machining accuracy of the operation plan. If the
operation plan cannot produce the required design tolerances and surface finishes, then
14
www.SeminarsTopics.com
discard it and go to Step 1.
iii) Estimate the production time and cost associated with operation plan.
3. If no promising operation plans were found, then exit with failure. Otherwise exit
with success, returning the operation plan that represents the best tradeoff among quality,
cost, and time.
15
www.SeminarsTopics.com
Setup 2:
Setup 3:
16
www.SeminarsTopics.com
SOLUTION
The planning for a new part begins with a definition of the finished section, the
design of the pass sequences, and the sizing of the different rolls in the CAD system. In
this analysis, the CAD data was fed into the MSC.Marc FEA solver, and the simulation
was run. The results were analyzed to determine the deviations in shape and dimensions
of the finished section. The longitudinal strains of the sheet edge revealed the quality of
the roll forming process. Some of the characteristics that were checked included,
dimensional tolerances, angular tolerances, longitudinal bow, twist sheet edge waviness,
and profile end deformation. After optimizing the manufacturing process in this virtual
environment, the manufacturer was able to manufacture the tools and run a test in the
17
www.SeminarsTopics.com
mill. This analysis avoids high costs derived from improperly designed tools needing
adjustment and rework in the mill to fit a new profile.
18
www.SeminarsTopics.com
SOLUTION
The doors used for this experiment were the front doors of four door sedans.
The door panels, hinges, locks, and other necessary mechanisms were used, while the
windows and door trims were removed. Hinges and latches were constrained. For static
compression and dynamic impact, the loading device was applied laterally on the center
of the door. Experimental results of a door in the body show different characteristics from
the results of a door alone, mainly because the door contacts with the center pillar and
side sill; therefore, the force on the door is distributed rather than concentrated on the
latch. However, the latch part still receives most of the force. In fact, experimental results
of the door within the car body showed cracks in the latch part, just like the results with
the door alone. The importance of the strength of the latch part should be stressed for the
strength of the door itself. From the static compression analysis and dynamic impact
19
www.SeminarsTopics.com
analysis of a door, as well as the experiments, it was found that the strength of the door
hinge and door latch strongly affected the crush resistance of a door itself. In the
experiments, it was found that once crack propagation occurred in the latch, the force
drastically decreased. It was also necessary to consider reinforcing the latch even when a
door has a door-beam. It was also found that by attaching a door-beam, absorption of the
deformation energy increased and deformation of the door decreased upon impact.
20
www.SeminarsTopics.com
market. Today, that cycle has been shortened to two or three years. And time to market
continues to drop, even as the size and the complexity of satellites and automobiles grow.
Still, market pressures are pushing manufacturers for even more reductions in time to
market. VM allows manufacturers to simulate factory layout digitally, in order to see how
the plant would function under the proposed arrangement and to predict out potential
problems on the line.
21
www.SeminarsTopics.com
injuries. VM lets manufacturing engineers visualize the production process via computer
which allows an overview of factory operations for a particular manufacturing job.
There are three areas to consider before actually laying out a real factory.
First, engineers have to determine the assemblies, fabrication, and machining needed for
the specific manufacturing process. Second, they need to figure out what tooling, fixtures,
and equipmentdown to the nuts and boltswill be needed. Then, they must lay out a
factory floor plan. VM is useful for each of these steps. Virtual factory software allowed
engineers to test how operators, tools, and material-handling systems would work
together even before construction began. If engineers decide to change the design of a
part while the part is still only a CAD model, they can use VM to demonstrate the effect
of the new design at every stage of the manufacturing process. The redesigned part, for
example, might need more clearance on the automotive line.
The same software that engineers use to simulate plant functioning via
computer can also be used to program and site robots on the assembly
VM also allows engineers to simulate robotic functioning. We can see whether
the robots can reach all the points it needs to reach. With the help of VM we can decide
for each robot where it should stand.
In addition to robots, employees themselves can be represented in a digitized
version. In this way, engineers can figure out where employees should stand on the line
and design workstations for them to both optimize their movements and to ensure they're
22
www.SeminarsTopics.com
not under any kind of ergonomic stress. Using VM, engineers can tell if an employee
could reach a particular tool on the line and if the employee would be strong enough to
lift it. They can see whether an employee could repeatedly perform a task without risking
a repetitive-motion injury.
23
www.SeminarsTopics.com
Reliability of an estimated value of a criterion (such as cost, schedule, or
quality) is defined as the closeness of that estimate to the average value of the criterion
resulting from actual manufacturing.
The manual (or semi-manual) estimation techniques described above require a
detailed description of the design, and knowledge of the processes to be used in
production. Since they are based on empirical knowledge, which has been derived from
years of experience, they typically provide reliable estimates for both the cost and the
processing time.
Manufacturability-related studies have automated the design critiquing
process to a certain extend. The product and process information used in such studies
may vary greatly in detail. Some methods assess the manufacturability based on
information that is known at the initial design stages. Other methods require a fully
developed design. As discussed above, however, most studies use indirect metrics for
design critiquing, which quantify the relative and not the absolute difficulty of
manufacture. Thus, it is difficult to assess the reliability of the manufacturability
estimates. Even these methods that do estimate processing times, do not account for the
dynamics of the production system, and therefore they cannot estimate the product's lead
(or cycle) time which contains queuing time. (Note that the latter may range from 50 to
95% of the cycle time). Similarly, although it may be possible to estimate material and
labor costs, it is not feasible to estimate inventory costs without considering the dynamics
of the production system. Finally, the ability to estimate product quality is minimal since
there manufacturability studies do not generally use sophisticated process models.
Virtual manufacturing is able to provide accurate estimates for processing
times, cycle times and costs (including inventory), as well as product quality. This is
because VM can model both the processes employed for the product's manufacture and
the production system dynamics. By employing comprehensive models of manufacturing
processes, VM will be able to accurately predict set-up times and run times, and,
consequently, labor costs. Furthermore, if these process models are able to predict the
variance of key product attributes, then process yields or the values of quality ratios may
be obtained by comparing the process capability with the corresponding design
tolerances. On the other hand, modeling the production process will yield queue times, as
24
www.SeminarsTopics.com
well as Work-In-Process and finished goods inventory. Consequently, accurate estimates
of overall cycle times and overall costs may be obtained. The potential of VM to provide
accurate cost, lead time and quality estimates is a major motivation to use this tool.
9. ADVANTAGES
25
www.SeminarsTopics.com
FEWER PROTOTYPES The more trials you can simulate in a virtual environment,
the less physical prototypes you need to perfect your design. This means you spend more
time up front in engineering and design, and less resources running physical trials. Virtual
prototyping is cheaper than building physical models and optimizing your design by trialand-error. It is not complete replacement for physical testing, but it can minimize the
effort and enable the resulting physical tests to be more successful.
LESS MATERIAL WASTE If you build fewer physical models, you waste less
material in the form of prototypes as well as the tooling used to create them.
26
www.SeminarsTopics.com
10. CONCLUSION
27
www.SeminarsTopics.com
Virtual manufacturing, when mature, is expected to greatly support assessing
the manufacturability of a candidate design and to provide accurate estimates for
processing times, cycle times and costs (including inventory), as well as product quality.
This is because VM will be able to model both the processes employed for the product's
manufacture and the production process. By employing comprehensive models of
manufacturing processes, VM will be able to accurately predict set-up times and run
times, and, consequently, labor costs. Furthermore, if these process models are able to
predict the variance of key product attributes, then process yields or the values of quality
ratios may be obtained by comparing the process capability with the corresponding
design tolerances. On the other hand, modeling the production process will yield queue
times, as well as Work-In-Process and finished goods inventory. Consequently, accurate
estimates of overall cycle times and overall costs may be obtained. Tools that assess
manufacturability by generating and evaluating manufacturing plans require more
computing time than approaches that try to analyze the design directly, but they also offer
more accurate results. As the cost of computing power continues to decrease, we
anticipate that such approaches will become increasingly widespread.
The potential of VM to support manufacturability assessments and provide
accurate cost, lead time and quality estimates is a major motivation for further research
and development in this area. There are several advancements, however, that are needed
to effectively support manufacturability assessments using virtual manufacturing. These
include:
1) Support for computer-aided conceptual design.
2) Integration beyond single applications and single manufacturing domains.
3) Critical role in supporting generative and hybrid approaches to process
planning.
4) Necessity to develop methods for integrating product design and process
planning with production planning and scheduling.
5) Need to develop product information models that are able to shape
information and data that are directly relevant to manufacturing, such as
tolerances (dimensional and geometric), and form features.
28
www.SeminarsTopics.com
6) Need to integrate process models into concurrent engineering and VM
systems.
7) New information models are necessary to capture the capabilities and
performance of production systems, and thus provide plant-specific
information to the virtual manufacturing system for design evaluation.
The development of an all inclusive virtual manufacturing system is a science itself, and
this paper is only a humble attempt in this direction.
11. REFERENCES
BOOK REFERENCE
29
www.SeminarsTopics.com
1. Vijay Ramachandran, 1995, "Information Models for Agile Manufacturing,"
Master's Thesis, University of Maryland at College Park.
2. David W. Rosen, John R. Dixon, Corrado Poli, and Xin Dong. Features and
algorithms for tooling cost evaluation in injection molding and die casting. In
Proceedings of the ASME International Computers in Engineering Conference ,
pages 1-8. ASME, 1992.
3. Achieving agile manufacturing in the automotive industry: Part I. Automotive
Engineering, 102(11):19, November 1994.
4. Achieving agile manufacturing in the automotive industry: Part II. Automotive
Engineering, 102(12):13, December 1994.
5. Douglas L. Waco and Yong Se Kim. Geometric reasoning for machining features
using convex decomposition. Computer Aided Design, 26(6):477--489, June
1994.
WEB REFERENCES
1. www.howstuffworks.com
2. www.virtualmanufacturing.com
3. www.mscsoftware.com
4. www.wiley.com
30