Professional Documents
Culture Documents
SCALE: 1/72
length: 390mm
width: 185mm
Height: 236mm
HISTORY: .......................................................................................................................................1
List of recommended tools:..............................................................................................................1
Before the start of construction: .......................................................................................................2
Color:................................................................................................................................................2
Model building procedure: ...............................................................................................................3
I) The skeleton of the hull: ...........................................................................................................3
II) Planking the hull: ....................................................................................................................4
III) Planking the decks: ................................................................................................................6
IV) Rowers Seats:.........................................................................................................................7
V) Stand: ......................................................................................................................................8
VI) Mast footing:..........................................................................................................................8
VII) The steering oar:...................................................................................................................9
VIII) Openings in the hull: ...........................................................................................................9
IX) Mast: ....................................................................................................................................10
X) yard: ......................................................................................................................................11
XI) Sail: ......................................................................................................................................12
XII) Shields: ...............................................................................................................................16
XIII) Oars: ..................................................................................................................................17
Parts List:....................................................................................................................................18
HISTORY:
This model represents the longship similar which was found near the village of Skuldelev at Denmark and
it is known as Skuldelev 2. The original was constructed primarily of oak wood about the year 1060 in
Dublin. The ship had a length of 30 meters and width of 3.8 meters. The ship could sail with 60-100 Viking
warriors onboard and was driven by a large rectangular sheet. In the case of no wind, there were 60 oars.
Page 1 of 18
Color:
In medieval ships, to protect the hull from the effects of sea water and wood pests, coated mixtures based
on tar were used which were a red brown or dark brown color. The model can achieve this effect by
staining the parts of the hull with dark stains. The Parts should be stained before gluing them. The deck
was in the original color of wood, so it is sufficient to wipe the boards with clear varnish.
Page 2 of 18
b) Attach ribs 1 to 13 to deck 14 in the following order. 7, 8, 6, 9, 5, 10, 4, 11, 3, 12, 2, 13, 1 and then
attach completed deck 14 to keel 0 as shown in diagram Ib.
Page 3 of 18
Page 4 of 18
b) Cut off the parts of ribs 1-13, which overlap overboard. Attention! Ribs 15 and 16 leave in the original
state.
Page 5 of 18
Page 6 of 18
Page 7 of 18
V) Stand:
a) Glue parts 34-36 to form a stand as shown in diagram Va
Page 8 of 18
Page 9 of 18
IX) Mast:
a) From the logs with a diameter of 4 mm cut the cone-shaped mast 45. On top of the mast cut
collection for tethering ropes and drill a 1mm hole. Then attach the mast to the foot of the mast.
The mast is shown at 1:1 scale in the plan 1.
b) Use the rope 43 and by chain pins connect the mast 44 to the hull of the ship and to the stem and
stern. Binding procedure of chain ropes is shown in the picture.
Page 10 of 18
X) yard:
a) From a 3mm dowel make a yard 46. The yard is displayed at 1:1 scale in the plan 1.
b) Attach the spar rope for pulling and download the yards, then pull the other end of the rope through the
hole in the mast with pulleys and 47 consider it to rowers seats, as is shown in the picture.
Thereafter attach the yard to the mast. The ends of the yard consider rope used to control yard, and then
attach the other end of the rowers seats.
Page 11 of 18
XI) Sail:
a) On the cloth, draw a pencil outline of the sail (Item 48). To the edge of the sail, add 10mm more for the
hem. Use a pencil to draw seams to divide the sail into individual segments. Use a sewing machine sews
on seams dividing the sheet into individual segments. Then cut out the sail and the edge.
Gradually sewn hem of the sheet as shown.
Page 12 of 18
b) Sew rope 49 around the perimeter of the sail. Towards the centre of the sail tie the rope to control the
sails 43.
Page 13 of 18
Page 14 of 18
d) Connect the lower end of the sail to the rowers seats using two ropes, one end of the sail tension by
reinforcement bar 50. Tension bar is shown at 1:1 scale in the plan 1. Then attach the others used rope to
control the rigging, as is shown in the picture.
Page 15 of 18
XII) Shields:
a) First make part 53, cut from a 3 mm dowel and shaped by using sandpaper. Then parts 53 are stuck on
the front surface of the shield. The handle of the shield 52 can be made from a 4mm piece of 1x1mm with
a needle notch. Then attach the handle to the shield.
Tie shields to the body then hull using ropes 43. The shields are displayed on a 1:1 scale plan 1.
Page 16 of 18
XIII) Oars:
a) Using the 2 mm dowel, make oars 54 and tensioning rods. As a first cut, sandpaper or needle file the
handle. At the other end of the oars work it into a semicircular shape.
Then using sandpaper, work the middle of a circular cross section. Finally brand list
oars. Oars are shown at 1:1 scale in the plan 1. Production of these would be facilitated by the use of the
modellers Mini Lathe.
Page 17 of 18
Parts List:
No.
0
1-13
14
15-16
17-28
29
30
31
32
33
34-36
37-38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
Description
Keel
Ribs
Deck
Ribs
Plans
Deck beams
Deck Beams
Reinforcement beam
Plates with holes
Seats beam
Stand
Mast foot
Rudder
Rudder
Rudder
Rudder spar
Rope
Mast
Chain pin
Yard timber
Roller
Sail
Rope
Rod
Shields
Shields
Shields
Oars
Material
plywood
plywood
plywood
plywood
plywood
strips
strips
strips
plywood
plywood
plywood
plywood
plywood
plywood
plywood
strips
cord
dowel
plywood
dowel
roller
Sail cloth
cord
dowel
plywood
beam
dowel
dowel
Size
2 mm
2 mm
0.8 mm
2 mm
0.8 mm
1x2mm
1 x3mm
1x1m
2 mm
1x2mm
2 mm
2 mm
2 mm
2 mm
2 mm
1x3mm
0.4 mm
4 mm
1.5 mm
3 mm
7 mm
0.8 mm
2 mm
0.8 mm
1x1m
3 mm
2 mm
Page 18 of 18
Quantities
1 pc
1 pc
1 pc
1 pc
2 pcs
8 pcs
14 pcs
6 pcs
2 pcs
8 pcs
1 pc
1 pc
1 pc
1 pc
2 pcs
1 pc
5m
1 pc
12 pcs
2 pcs
2 pcs
1 pc
1m
12 pcs
64 pcs
6 pcs
2 pcs
12 pcs.
Viking LONGSHIP-plan1
M 1:72
50
46
54
44
51
34
15
41
2
38
36
37
35
4
5
32
32
40
39
10
9
16
12
11
13
C Daniel Duek
48
Viking LONGSHIP-plan2
M 1:72
C Daniel Duek
14