You can use 111-11111111 for your serial number. You can use 001G1 For you Product Key 3 - Wait for installation to complete 4 - Disconnect your internet (pull out the cord from your computer, or if you're on a wireless device, just turn off the WiFi for a few minutes) 5 - Once installed, open the application (it should be called AutoCAD 2015; a short-cut might appear on your desktop too) 6 - The application will start and the splash screen will display ("Welcome to Autodesk AutoCAD") This screen will also ask you about Activation. 7 - Right click on the xf-adsk2015 activation program and "Run as Administrator" 8 - Click on the offline Activation option 9 - Autodesk AutoCAD will generate a "Request" for you. Copy and paste this into the xf-adsk2015 application 10 - Click the "Generate" button, after you have copy and pasted the request 11 - Click the "Patch" button 12 - In Autodesk AutoCAD, Copy and Paste the Activation code that was generated for you. You'll notice that the code is 7 digits short; this is OK so long as you have followed steps 9 - 13. 13 - Click Next. Your Product will activate. --Troubleshooting: 1. If you get an error, it's most likely because you haven't properly Patched the application. You must Paste in the request, click Generate on the activation, then click patch, then copy and paste the Activation : into AutoCAD. If any of these steps are missed, you will receive an error. Reference steps 9 - 13.