Professional Documents
Culture Documents
Yardage Fabric A
Fabric B
Fabric C
BLIS 520 C
BLIS 523 B
BLIS 522 B
2 yards
⅝ yard
⅞ yard
Block A and binding
Block A
Block A
Fabric D BLIS 521 C 1⅜ yards Block B
Fabric E BLIS 520 K ⅝ yard Block B
Fabric F BLIS 523 C 1¼ yards Block B and inner border
Fabric G BLIS 519 C 1⅝ yard Outer border
Any Bliss fabric 5½ yards Backing
Cutting All strips are cut across the width of fabric (wof).
From fabric A, cut:
• (9) 2¼" x wof binding strips
• (14) 2⅛" x wof strips; crosscut into:
(31) 2⅛" x 8½" rectangles
Block Assembly
After sewing each seam press the seam
(31) 2⅛" x 6⅞" rectangles
• (3) 3⅝" x wof strips; crosscut into: allowances toward the just-added rectangle.
(31) 3⅝" squares 1. Sew a fabric B 2⅛" x 3⅝" rectangle to the left side of
From fabric B, cut: each fabric A square. Sew a fabric B 2⅛" x 5¼" rectangle
• (8) 2⅛" x wof strips; crosscut into: to the bottom of each unit.
(31) 2⅛" x 5¼" rectangles 2. Sew a fabric C 2⅛" x 5¼" rectangle to the left side of
(31) 2⅛" x 3⅝" rectangles each unit and then sew a fabric C 2⅛" x 6⅞" rectangle to
From fabric C, cut: the bottom of each unit.
• (11) 2⅛" x wof strips; crosscut into:
(31) 2⅛" x 6⅞" rectangles 3. Sew a fabric A 2⅛" x 6⅞" rectangle to the left side of
(31) 2⅛" x 5¼" rectangles each unit and then sew a fabric A 2⅛" x 8½" rectangle to
From fabric D, cut: the bottom of each unit. Make a total of 31 A blocks.
• (15) 2⅛" x wof strips; crosscut into: 4. In the same manner, and using fabric D squares and
(32) 2⅛" x 8½" rectangles rectangles, fabric E rectangles, and fabric F rectangles,
(32) 2⅛" x 6⅞" rectangles make a total of 32 B blocks.
• (3) 3⅝" x wof strips; crosscut into:
(32) 3⅝" squares
From fabric E, cut:
• (8) 2⅛" x wof strips; crosscut into:
Quilt Assembly
5. Lay out the A and B blocks in nine rows of seven
(32) 2⅛" x 5¼" rectangles
blocks each, alternating and rotating the blocks as shown
(32) 2⅛" x 3⅝" rectangles
in the photo. Sew the blocks into rows; press. Sew the
From fabric F, cut:
rows together and press.
• (11) 2⅛" x wof strips; crosscut into:
(32) 2⅛" x 6⅞" rectangles 6. Sew the fabric F inner-border strips together end to
(32) 2⅛" x 5¼" rectangles end. From this strip, cut (2) 72½"-long strips and (2)
• (7) 2" x wof inner border strips 59½"-long strips. Sew the longer strips to the sides of the
From fabric G, cut: quilt top and the shorter strips to the top and bottom of
• (8) 6½" x wof outer border strips the quilt top.
7. Sew the fabric G outer-border strips together in 8. Layer the quilt top with batting and backing;
pairs. From the long strips, cut (2) 75½"-long strips baste. Quilt as desired. Using the 2¼"-wide fabric
and (2) 71½"-long strips. Sew the longer strips to A strips, bind the edges to finish. Add a label to the
the sides of the quilt top and the shorter strips to back of your quilt and enjoy!
the top and bottom of the quilt top.
Yardage Fabric A
Fabric B
Fabric C
BLIS 522 R
BLIS 523 RO
BLIS 522 E
⅞ yards
¼ yard
⅜ yard
Block A and binding
Block A
Block B
Fabric D BLIS 521 E ½ yards Block B
Fabric E BLIS 523 O ¼ yard Block B
Fabric F BLIS 520 X ½ yards Block A and inner border
Fabric G BLIS 519 E 1 yard Outer border
Any Bliss fabric 3 yards Backing
Cutting All strips are cut across the width of fabric (wof).
From fabric A, cut: From fabric G, cut:
• (5) 2¼" x wof binding strips • (3) 5½" x wof outer border strips
• (4) 2⅛" x wof strips; crosscut into: • (2) 5½" x 34½ outer border strips
(8) 2⅛" x 8½" rectangles
(8) 2⅛" x 6⅞" rectangles
• (8) 3⅝" squares
From fabric B, cut:
• (3) 2⅛" x wof strips; crosscut into:
Quilt Assembly
1. Referring to the Flutterby lap quilt instructions, “Block
(8) 2⅛" x 5¼" rectangles Assembly” and using fabric A squares and rectangles, fabric
(8) 2⅛" x 3⅝" rectangles B rectangles, and fabric F rectangles, make a total of 8 A
From fabric C, cut: blocks. In the same manner, and using fabric D squares and
• (4) 2⅛" x wof strips; crosscut into: rectangles, fabric E rectangles, and fabric C rectangles, make
(8) 2⅛" x 6⅞" rectangles a total of 8 B blocks.
(8) 2⅛" x 5¼" rectangles
From fabric D, cut:
2. Lay out the A and B blocks in four rows of four blocks
each, alternating and rotating the blocks as shown in the
• (4) 2⅛" x wof strips; crosscut into:
photo. Sew the blocks into rows; press. Sew the rows
(8) 2⅛" x 8½" rectangles
together and press.
(8) 2⅛" x 6⅞" rectangles
• (8) 3⅝" squares 3. Sew a fabric F 32½"-long inner-border strip to each side
From fabric E, cut: of the quilt top. Sew a fabric F 34½"-long inner-border strip
• (3) 2⅛" x wof strips; crosscut into: to the top and bottom of the quilt top.
(8) 2⅛" x 5¼" rectangles 4. Sew a fabric G 34½"-long outer-border strip to each side
(8) 2⅛" x 3⅝" rectangles of the quilt top. Sew the remaining 5½"-wide fabric G outer-
From fabric F, cut: border strips together end to end. From this strip, cut (2)
• (4) 2⅛" x wof strips; crosscut into: 44½"-long strips and sew them to the top and bottom of the
(8) 2⅛" x 6⅞" rectangles quilt top.
(8) 2⅛" x 5¼" rectangles
• (2) 1½" x 32½ inner border strips 5. Layer the quilt top with batting and backing; baste. Quilt
• (2) 1½" x 34½ inner border strips as desired. Bind the edges to finish.