Pesten
7.1 Explanations to adjustment list
7. Adjustment list
Pester |
Position change-over | Identification
‘number on the machine
The
identication
number (21) has been
fixed on each position for
change-over on the machine
‘You wil find all necessary steps
for change-over in the adjustment ls.
Indication of position
Adjustment ofthe
Indicated position (3) by
sliding of the acjustment unit.
[Unit of measurement: mm]
Change parts,
The first number (21) indicates the
changing point whereas the second
‘number (3) indicates the
produet according to the
Bec 8
[Unit of measurement bar)
| ‘Set pressure value indi-
cated in agjustent Ist
adjustment list “Pull tuning handi.
Set pressure belo
ast value. Then tum
handle to righthand
Marked 2.Press turning
change pars, ran
have tobe replat
ed according
adjustment is Nt
Seale Indication Siko
nf f
:
available,
unlock the clamping
lever. Adjust the inai-
cated positon (145.3 mm)
by turning the handwies!
to the position according tothe adjust-
| ment ist. Tighten the clamping lever again.
Adjust-
, ment of the
indicated position (74 mm)
by sliding ofthe adjustment unit(Pruo-pack 250 12 overall vow ot domifeaton nubs on the machine Bester |
ot Symbol
8 10 7.2018 15 2202392 36 49 47 7073.48 345 OR
VV AL |
A \ \
\\ \\
\ \Fa Adjustment at Pester
7.3 lentieation numbers onthe machine
|
|
‘DIRECTION: The ming value ave tbe acres by yours os eras ne sampler af aiton 2/31 4an ala