Professional Documents
Culture Documents
Clarkson KG A PDF
Clarkson KG A PDF
3" to 60"
General Applications
Technical Data
Mining
Size range:
Operating pressure:
Size range:
Operating pressure:
Size range:
Operating pressure:
Power
Pulp and paper
Alumina
Chemical
Cement
3" to 24"
100 psi
26" to 42"
75 psi
48" to 54"
50 psi
Size range:
60"
Operating pressure: 30 psi
Sleeve:
Flow Control
Clarkson is either a trademark or registered trademark of Tyco International Services AG or its affiliates
in the United States and/or other countries. All other brand names, product names, or trademarks
belong to their respective holders.
Copyright 2009 Tyco Flow Control. All rights reserved.
CLKMC-0113-US-0905
Features
Sleeve Configurations
Open Position:
Closed Position:
3" to 16"
Standard Configuration
Ductile iron, cast or fabricated carbon
steel housings.
316 stainless steel gate rated for:
100 psi (3" to 24")
75 psi (26" to 42")
50 psi (48" to 54")
30 psi (60")
Mild steel body spacers and actuator
support frames.
Flat-faced body flanges drilled and
tapped (3" to 10") or slotted (12" to 60")
to match ANSI B16.5 Class 150
(3" to 24") or MSS-SP44 (26" to 60")
companion flanges.
High tear strength natural rubber
sleeves with stiffener rings.
Natural rubber-covered carbon steel
sleeve retainer flanges (10" to 60").
Gate Closed
Gate Open
Optional
Actuation
Note: Not all actuators shown are available on all valve sizes
AC Air Cylinder
Splashguards
Actuators
Control accessories
Fabricated housing (body) of most any
weldable alloy in any standard size
HC Hydraulic Cylinder
EM Electro-mechanical
Hydra-Helper
CLKMC-0113
2
Features
Heavy-duty frame (yoke) designed to
accept top removal stem nut, bevel gear
or cylinder actuator.
Specification
Clarkson KGA Slurry Knife Gate Valve
Heavy duty, slurry knife gate valve shall be flat-face flanged, packingless, rubber-lined,
bi-directional valve suitable for a wide range of industrial applications. The full port design
shall have no internal obstructions and will provide a blind flange shut-off when the gate
is closed. The valves sealing surface is to be between two thick, rubber sleeves that are
compressed into the valve housings. The sleeve will be molded with an internal stiffener
ring that locates the sleeve in the valve housing and helps the sleeves resist the high
shearing forces present when the gate is driven between them. Mild steel body spacers
shall separate the body housings and serve as an external guide to the valves knife-edge
gate. The stainless steel gate shall be completely withdrawn from the process flow when in
the open position, and can be inspected and replaced, if necessary, without taking the
valve out of service. When the valve is in the closed position, the downstream sleeve can
be replaced while the upstream portion of the valve is still holding pressure. The valve
body housing to be full flanged, drilled and tapped or slotted to suit ANSI B16.5/150
through 24" and MSS-SP44 above 24". Valve is equipped with a heavy steel fabricated
handwheel frame (yoke) which can be converted to bevel gear in the field, complete with a
304 stainless steel rising stem (except cylinder actuated valves). All nonferrous exterior
surfaces shall be painted to factory standard. Specify Clarkson KGA slurry knife gate valve
from Tyco Flow Control.
CLKMC-0113
3
BG
HC
AC
A
C
J Inlet
H Port
Valve
Size
A*
B**
3
4
7.50
9.00
6.88
6.88
8.88
11.00
18.93
22.00
21.38
23.33
6
8
11.00
13.50
7.00
7.25
13.00
15.25
28.00
32.90
10
12
16.00
19.00
8.88
10.13
16.56
21.00
14
16
21.00
23.50
10.13
11.00
18
20
25.00
27.50
24
26
Handwheel
MH
BG
M
M
HC
G
21.38
23.94
24.56
27.63
2.41
3.33
2.81
3.88
15.81
16.88
12
12
12
12
31.82
14.89
30.18
35.00
34.00
38.31
5.38
6.88
5.81
7.75
17.88
19.00
16
20
38.75
42.63
47.45
40.50
45.50
44.25
53.13
9.06
10.75
9.81
11.50
23.40
25.50
22.75
24.25
53.31
57.20
53.43
60.19
57.80
64.06
12.50
14.00
13.25
14.75
12.25
14.13
26.50
28.38
66.75
71.94
67.62
73.50
68.75
74.44
14.88
16.56
32.00
34.25
14.63
14.66
33.80
36.75
86.19
88.00
89.63
93.63
30
36
38.75
46.25
15.57
18.50
41.50
48.25
42
48
53.00
59.50
21.03
21.13
56.50
60.35
158.25
43.98
54
60
66.19
73.00
20.75
21.00
67.25
77.00
MH
D
Weight
BG
AC
HC
50
64
127
141
85
130
50
70
12
12
98
135
175
212
180
210
98
135
20
24
24
198
275
427
310
669
175
360
26.38
27.62
24
24
448
573
720
1125
414
550
16.75
18.50
30.35
31.29
24
24
875
1054
1330
1680
950
1200
21.19
23.50
23.00
25.00
34.75
24
2200
1400
1700
106.19
119.25
26.75
31.88
29.00
35.00
2150
3500
145.68
38.25
41.00
51.75
5200
6970
172.88
188.25
48.98
57.13
60.00
60.00
8275
9500
Handwheel
MH
BG
M
M
MH
Weight
BG
AC
HC
MH
A*
B**
MH
D
Centerline to top
BG
AC
E
F
HC
G
3
4
190.50
228.60
174.75
174.75
225.55
279.40
480.82
558.80
543.05
592.58
543.05
608.08
623.82
701.80
61.21
84.58
71.37
98.55
401.57
428.75
304.8
304.8
304.8
304.8
22.7
29.0
57.6
64.0
38.6
59.0
22.7
31.8
6
8
279.40
342.90
177.80
184.15
330.20
387.35
711.20
835.66
808.23
378.21
766.57
889.00
863.60
973.07
136.65
174.75
147.57
196.85
454.15
482.60
406.4
508.0
304.8
304.8
44.5
61.2
79.4
96.2
81.6
95.3
44.5
61.2
10
12
406.40
482.60
225.55
257.30
420.62
533.40
984.25 1082.80
1205.23
1028.70
1155.70
1123.95
1349.50
230.12
273.05
249.17
292.10
594.36
647.70
508.0
609.6
609.6
89.8
124.7
193.7
140.6
303.5
79.4
163.3
14
16
533.40
596.90
257.30
279.40
577.85
615.95
1354.07
1452.88
1357.12
1528.83
1468.12
1627.12
317.50
355.60
336.55
374.65
670.05
701.55
609.6
609.6
203.2
259.9
326.6
510.3
187.8
249.5
18
20
635.00
698.50
311.15
358.90
673.10
720.85
1695.45
1827.28
1717.55
1866.90
1746.25
1890.78
377.95
420.62
425.45
469.90
770.89
794.77
609.6
609.6
396.9
478.1
603.3
762.0
430.9
544.3
24
26
812.80
869.95
371.60
372.36
858.52
933.45
2189.23
2235.20
2276.60
2378.20
538.23
596.90
584.20
635.00
882.65
609.6
997.9
635.0
771.1
30
984.25
36 1174.75
395.48
469.90
1054.10
1225.55
2697.23
3028.95
679.45
809.75
736.60
889.00
975.2
1587.6
42 1346.20
48 1511.30
534.16
536.70
1435.10
1532.89
3700.27
971.55
1041.40
1314.45
2358.7
3161.5
54 1681.23
60 1854.20
527.05
533.40
1708.15
1955.80
4391.15
4781.55
1244.09
1451.10
1524.00
1524.00
3754.8
4309.1
4019.55 1117.09
* Flange diameter: Designed to match ANSI B16.5/150 through 24", MSS-SP44 above 24"
** Face-to-face includes the retainer flanges, all sizes. Retainer flanges are standard sizes 10" and larger, optional on 8" and smaller.
Add 1/4" to 1/2" for ease of installation
Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services.
Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO
REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO
THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING
INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco
reserves the right to change product designs and specifications without notice. All registered trademarks are the property of their respective owners. Printed in the USA.
CLKMC-0113
4
www.tycoflowcontrol.com