consider a single component vaporizer as shown in the
figure. LPG is fed into a pressurized tank to hold the liquid level in the tank. Assume LPG is a pure component containing propane. The liquid in the tank is assumed to be perfectly mixed. Heat is added at a rate of Q to hold the desired pressure in the tank by vaporizing the liquid at a rate Wv mass per time. Heat losses and mass losses are assumed to be negligible. Gas is withdrawn off the top of the tank at a volume flow rate Fv. Develop 1. A steady state model 2. Liquid phase dynamic model 3. Liquid & vapour dynamic model 4. Thermal equilibrium model. ANS. F0 is input flow rate, T0 input liquid temperature. FV is output stream flow rate, TV vapour temperature, PV is partial pressure of vapour, TL is for liquid inside the tank and VL is volume of liquid inside the tank. 1) STEADY STATE HEAT BALANCE FOR SYSTEM: (F00h0) (FvvHv) + Q = 0 (F00CpT0) (FvvCpTv + Fvvv) + Q = 0 Assumption: if F0 = Fv, 0=v= Then F0Cp (T0-Tv) - F0v + Q = 0
2) LIQUID PHASE DYNAMIC MODEL:
ASSUMPTION: changes in the vapour phase are negligible
Mass balance for liquid phase is given by,
F00 - Fvv =
d (V l) dt
Heat balance is given by,
(F00h0) (FvvHv) + Q =
d ( lhV l) dt d ( lhV l) dt
(F00CpT0) (FvvCpTv + Fvvv) + Q =
(F00CpT0) (FvvCpTv + Fvvv) + Q = (
pd ( T lV ll )
dx
Density of vapour is given by assuming ideal gas
v =
PM RT
The unknown in the system are: F0, Q, P, VL, V & TL
So we need 6 equations to solve. For 1st controller (inlet side) F0 = f1 (VL) .4 For 2nd controller
Q = f2 (PV) .5
Antoine equation is given by
ln (Pi) =
A T
+ B .6
By solving the above 6 equation we can get the values of
ChatGPT Money Machine 2024 - The Ultimate Chatbot Cheat Sheet to Go From Clueless Noob to Prompt Prodigy Fast! Complete AI Beginner’s Course to Catch the GPT Gold Rush Before It Leaves You Behind