(4) 1 x 12 maple (4) 1 x 12 sapele Instructions: *(sand and every cut made)
lines each an inch apart
3.Third create four vertical
What you will need:
Safety gear Miter saw Wood glue Clamps Ruler Pencil Jointer sander/sand paper Mineral oil Wood: (1 Thick)
Glue all 8 pieces in
In alternating Colors ( make sure the darkest wood is goes first) Second cut the top left corner at 4x4 inches Third create four vertical lines each an inch apart Once the pieces are cut thake piece #2 and #4 and turn them upside down Finally glue all pieces as shown Then Sand then polish with mineral oil
Reactive Power Management in Renewable Rich Power Grids: A Review of Grid-Codes, Renewable Generators, Support Devices, Control Strategies and Optimization Algorithms