Professional Documents
Culture Documents
1. Draw the shear and bending moment diagrams for the beam and loadings shown. Indicate the
values at all change of loading positions and at all points of zero shear. Also indicate the
degree of each curve and determine the absolute maximum values of the shear and bending
moment. Use the METHOD OF SECTIONS.
(ANSWER:
(ANSWER:
2. Use the Method of Sections to draw the shear and bending moment diagram of beam
ABCDEF. Indicate the degree of each curve. Identify the value of absolute maximum shear
and bending moment. Note that C is an internal pin and F is a roller support.
(ANSWER: Vmax = 30 kN Mmax = 109.7321 kNm)
3. Draw the shear and bending moment diagrams for problems 1 and 2. Indicate the values at all
change of loading positions and at all points of zero shear. Also indicate the degree of each
curve and determine the absolute maximum values of the shear and bending moment. Use the
method specified for each problem.
4. The beam shown below is supported by a pin at A and a roller at G. Use the method of area to
draw the shear and bending moment diagram of the beam ABCDEFG. Indicate the degree of
each curve. Identify the value of absolute maximum shear and bending moment. Also
30N/m
10N/m
5
5N/m
1m
12
1m
B
C
F
10N/m
15Nm
100 N
4m
2m
1.5m
3.5m
2m
6m