Professional Documents
Culture Documents
001-6C Controller Parameter Starup Setting PDF
001-6C Controller Parameter Starup Setting PDF
Issue Date:
Service
CPGC - S - 00000009 - 1
Revision: 1
Revision Date:
Title:
Model(s)
Background/Description:
This is revised version of the PSB CPGC-S-00000009
Corrective Actions:
1.2 Following the feature code updated above, below parameters need to be modified:
1.2.1 Go to Adjustments -> Alternator Protection, modify below parameters:
Parameter Name
Value
units
Overfrequency Threshold
10
Hz
Underfrequency Threshold
10
Hz
Value
units
1875
rpm
shutdown
25
Psig
30
Psig
Parameter Name
Value
0.95
units
Value
units
50
seconds
30
%sec
60
1100
rpm
60
Important Note: The feature code and modify parameters are suitable for C250 D5
genset with PMG.
2. Below procedures are designated for C250 D5(shunt)
2.1 Open InPower and connect to PCC1302, update the feature code as below list.
Go to Device ->Update Features.
2.2
Following the feature code updated above, below parameters need to be modified:
Parameter Name
Value
units
Overfrequency Threshold
10
Hz
Underfrequency Threshold
10
Hz
Parameter Name
Value
units
1875
rpm
shutdown
25
Psig
30
Psig
Value
0.95
units
modify below
Parameter Name
Value
units
50
seconds
30
%sec
60
1100
rpm
60
Important Note: The feature code and modify parameters are suitable for C250 D5
genset without PMG.
3. 2
Following the feature code updated above, below parameters need to be modified:
Value
units
Overfrequency Threshold
10
Hz
Underfrequency Threshold
10
Hz
Value
units
1875
rpm
shutdown
25
Psig
30
Psig
Parameter Name
Value
0.95
units
Parameter Name
Value
units
50
seconds
30
%sec
60
1100
rpm
60
Important Note: The feature code and modify parameters are suitable for C220 D5
genset with PMG.
Open InPower and connect to PCC1302, update the feature code as below list.
4. 2
Following the feature code updated above, below parameters need to be modified:
Value
units
Overfrequency Threshold
10
Hz
Underfrequency Threshold
10
Hz
Value
units
1875
rpm
shutdown
25
Psig
30
Psig
Parameter Name
Value
0.95
units
Parameter Name
Value
units
50
seconds
30
%sec
60
1100
rpm
60
Important Note: The feature code and modify parameters are suitable for C220 D5
genset without PMG.
5. Below procedures are designated for C225 D6(PMG)
5. 1
Open InPower and connect to PCC1302, update the feature code as below list.
5. 2
Following the feature code updated above, below parameters need to be modified:
Value
units
Overfrequency Threshold
10
Hz
Underfrequency Threshold
10
Hz
Value
shutdown
25
Psig
30
Psig
units
Parameter Name
Value
0.95
units
Value
units
50
seconds
30
%sec
60
1100
rpm
60
Important Note: The feature code and modify parameters are suitable for C225 D6
genset with PMG.
Open InPower and connect to PCC1302, update the feature code as below list.
6.2
Following the feature code updated above, below parameters need to be modified:
Value
units
Overfrequency Threshold
10
Hz
Underfrequency Threshold
10
Hz
Value
shutdown
25
Psig
30
Psig
units
Parameter Name
Value
0.95
units
Value
units
50
seconds
30
%sec
60
1100
rpm
60
Important Note: The feature code and modify parameters are suitable for C225 D6
genset without PMG.
Warranty Statement:
Any work described in this PSB is covered by standard SRTs. See below.
Contact:
For help and assistance on this issue please contact any of the following:
In ASIA: Grace Lee (grace.lee@cummins.com)
In Europe, Middle East or Africa: Chris Tragner (chris.tragner@cummins.com)
In Africa: Peter Neale (peter.neale@cummins.com)
In China: Haoming Liu (haoming.liu@cummins.com)
In the Americas: Robert Simmons (robert.simmons@cummins.com