Professional Documents
Culture Documents
Minidwep-gtk
1. Insert CD to you CD Rom, restart your computer and boot the CD Rom (just like when you format
computer to install windows, boot the CD).
You may need to change your boot order to CDROM first instead of Harddisk. It normally change
change in bios setup during you start computer by press F2, F10, ESC depending your computer.
** If you don't know how to do this, kindly consult your friend/computer technician with basic
computer knowledge.
Or go to www.google.com and search for how to "boot from CD ROM drive".
2. After boot successful, you will be bring to below screen. Click the Minidwep-gtk to start the program.
4. Click the Minipwep-gtk to start the program. Then click scan to scan the available wireless.
5. Select the wireless with client, and click the launch to start cracking process.
Note: the router that you want to hack must be using (have data transfer), the higher data transfer, the
faster the cracking process.
If you notice that IVS value is not running, or running very very slow after few minutes, it means that
there is no data transfer on the router. You may look for other time (when the router is using) to test
again.
6. Below showing the IVS is running and increasing... Normally IVS Reach value around 30000 to 50000,
the password will be found.
7. Below shown successful case with password shown. Copy down the password and close the software.
Then logout and shutdown the machine.
For WPA/WPA2: