Professional Documents
Culture Documents
Page 1 of 1
Cylinder Liners
For Installation:
a. Put liquid soap on the liner bore surfaces of the cylinder block and on the rubber seals installed on
the lower part of the liner.
b. Put the filler band completely in clean engine oil for a moment.
c. Install filler band (3) in the groove under the liner flange, without delay.
d. Install the liner in the block immediately, before expansion of the filler band.
(1) Bore in liner (new) . . . 137.185 0.025 mm (5.401 .001 in)
(2) Thickness of flange on liner . . . 8.89 0.02 mm (.350 .001 in)
(3) Filler Band.
Copyright 1991, 2011 Caterpillar Inc.
All Rights Reserved.
file://C:\SIS\TMP\sis211prt.html
17/08/2011