Professional Documents
Culture Documents
29 - Immo Renault Without Can
29 - Immo Renault Without Can
EMULATOR IMMO
RENAULT without CAN
3
Syrius 32 without CAN
Syrius 34 1.4 1.6 2.0
EMS 3132
1.9 2.2 and 2.5 DCI without CAN
1.5 DCI without CAN
1.9 DTI 1 plug
1.9 DTI 2 plugs
1.9 Diesel DCU3
2.8 TD
3.0 gasoline 1 plug
.
In case of losing the car keys or a car burglary, it enable to drive
off from the road to the car service.
Due to a low cost you can leave it in the car instead of buying a
new immo or making car keys duplicate
In the addresses
from 4000 lo 7FFF find values 64 C7 and change these values
everywhere and two units before them into FF FF FF FF.
Do It in the whole map from 4000 to 7FFF!!!
7
I connecting emulator to ECU:
+12VACC-29pin
CODE - 58pin
GROUND- 3pin
cut off 58pin from plug !!!
Power for the emulator and ground take from the capacitor.
Code signal after desolder resistor 333
10
To match the emulator you need to replace all content into files
11
Power for the emulator take from the capacitor at the flash.
12
EMS 3132
13
14
Power for the emulator take from the capacitor at the flash.
15
16
In memory 5P08C3
in the addresses:
003E, 003F, 0040,0041
and
0044, 0045, 0046, 0047
type FF.
17
Power for the emulator take from the capacitor on the driver plate
18
Power take from capacitor at the memory. Add injectors and settings by
Clip or Launch.
19
20
21
22
Connecting emulator
in the ECU:
GND (brown) pin 4,5
ACC (black) pin 81
immo line (white) pin 15
23
02-05 = 00 00 FF FF
For coding
82-85 = 00 00 FF FF
In memory 95080 change into 00 00 FF FF addresses from 00 to OD
and 80 to 8D.
24
bend - pin 20
Pin 20 must be bend in plug or cut off from the car wiring.
25
Mascott 2.8 TD
26
Connecting emulator in the driver:
27
Warning!
Due to possible construction changes of the cars, before connecting
the device check signals by multimeter on the ECU plug.