Professional Documents
Culture Documents
Shaft. Design.
1 12351-89
. .
WWW.RUSSIANGOST.COM
OST 1 12921-89
Shaft. Design.
1 12921-89
. .
WWW.RUSSIANGOST.COM
OST 1 12922-89
Shaft. Design.
1 12922-89
. .
WWW.RUSSIANGOST.COM
OST 1 14477-87
Shaft. Design.
1 14477-87
. .
WWW.RUSSIANGOST.COM
OST 1 14509-87
Shaft. Design.
1 14509-87
. .
WWW.RUSSIANGOST.COM
OST 3-6376-88
Shaft. Design.
3-6376-88
. .
WWW.RUSSIANGOST.COM
OST 1 12921-77
Shaft-eccentric. Design and dimensions.
1 12921-77
-. .
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 108.664.11-82
Shaft-mounted mandrel and scans channels for cooling with diameters of 63 to 80 mm. Design and dimensions.
108.664.11-82
63 80 . .
WWW.RUSSIANGOST.COM
OST 108.664.10-82
Shaft-mounted mandrel and the scans with channels for cooling in diameters from 25 mm to 50 mm. Design and dimensions.
108.664.10-82
25 50 . .
WWW.RUSSIANGOST.COM
OST 24.664.10-71
Shaft-mounted mandrel and the scans with channels for cooling in diameters from 25 mm to 50 mm. Design and dimensions.
24.664.10-71
25 50 . .
WWW.RUSSIANGOST.COM
OST 24.664.11-71
Shaft-mounted mandrel and the scans with channels for cooling in diameters from 50 to 80 mm. Design and dimensions.
24.664.11-71
50 80 . .
WWW.RUSSIANGOST.COM
OST 5.4097-85
Shafts of shipboard shaft lines. General specifications.
5.4097-85
. .
WWW.RUSSIANGOST.COM
OST 5.9648-76
Shafts of shipboard shaft lines. Typical technological production processes.
5.9648-76
. .
WWW.RUSSIANGOST.COM
OST 1 00323-79
Shafts and apertures of gas turbine engine case. Fits of ball and roller bearings.
1 00323-79
. .
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 12.44.097-78
Shafts and axles. Stress and stiffness calculation.
12.44.097-78
. .
WWW.RUSSIANGOST.COM
OST 3-6407-88
Shafts and axles. Typical technological process and cross-wedge rolling production.
3-6407-88
. - .
WWW.RUSSIANGOST.COM
OST 3-6356-87
Shafts and axles. Typical technological production process by means of cold lengthwise rolling and knurling.
3-6356-87
. .
WWW.RUSSIANGOST.COM
OST 26-08-354-71
Shafts of gluing machines. Types, main parameters and dimensions.
26-08-354-71
. , .
WWW.RUSSIANGOST.COM
OST 4G 0.425.001-73
Shafts of management for the electronic equipment. Specifications.
4 0.425.001-73
. .
WWW.RUSSIANGOST.COM
OST 92-0689-93
Shafts of management. General specifications.
92-0689-93
. .
WWW.RUSSIANGOST.COM
OST 22-1229-78
Shafts with bayonet fastening. Design and dimensions (restriction as per GOST 12486-67).
22-1229-78
. ( 12486-67).
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 5-8326-74
Shafts with catch lock.
5-8326-74
.
WWW.RUSSIANGOST.COM
OST 23.1.55-81
Shafts with cone points for conical joints 1:5. Main dimensions.
23.1.55-81
1:5. .
WWW.RUSSIANGOST.COM
OST 22-1228-78
Shafts with screw fastening. Design and dimensions (restriction as per GOST 12485-67).
22-1228-78
. ( 12485-67).
WWW.RUSSIANGOST.COM
OST 1 76736-80
Shafts.
1 76736-80
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.029-71
Shafts.
11-0.440.029-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.030-71
Shafts.
11-0.440.030-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.031-71
Shafts.
11-0.440.031-71
.
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 11-P0.440.032-71
Shafts.
11-0.440.032-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.033-71
Shafts.
11-0.440.033-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.034-71
Shafts.
11-0.440.034-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.035-71
Shafts.
11-0.440.035-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.036-71
Shafts.
11-0.440.036-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.037-71
Shafts.
11-0.440.037-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.038-71
Shafts.
11-0.440.038-71
.
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 11-P0.440.039-71
Shafts.
11-0.440.039-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.040-71
Shafts.
11-0.440.040-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.041-71
Shafts.
11-0.440.041-71
.
WWW.RUSSIANGOST.COM
OST 11-P0.440.042-71
Shafts.
11-0.440.042-71
.
WWW.RUSSIANGOST.COM
OST 1 11812-82
Shafts. Design and dimensions.
1 11812-82
. .
WWW.RUSSIANGOST.COM
OST 1 10896-73
Shafts. Design and dimensions.
1 10896-73
. .
WWW.RUSSIANGOST.COM
OST 1 13346-78
Shafts. Design and dimensions.
1 13346-78
. .
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 2-A83-1-72
Shafts. Design and dimensions.
2-83-1-72
. .
WWW.RUSSIANGOST.COM
OST 3-4629-80
Shafts. Design and dimensions.
3-4629-80
. .
WWW.RUSSIANGOST.COM
OST 3-5746-84
Shafts. Design and dimensions.
3-5746-84
. .
WWW.RUSSIANGOST.COM
OST 70.0006.187-77
Shafts. Design and dimensions.
70.0006.187-77
. .
WWW.RUSSIANGOST.COM
OST 92-9301-80
Shafts. Design and dimensions.
92-9301-80
. .
WWW.RUSSIANGOST.COM
OST 11-P0.440.043-71
Shafts. Technical requirements.
11-0.440.043-71
. .
WWW.RUSSIANGOST.COM
OST 4G 0.059.310-77
Shafts. Technical requirements.
4 0.059.310-77
. .
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 3-1393-80
Shafts. Types, Design and dimensions.
3-1393-80
. , .
WWW.RUSSIANGOST.COM
OST 24.149.12-86
Shafts-bars for hatches and doors of locomotives and track machines. Design.
24.149.12-86
- . .
WWW.RUSSIANGOST.COM
OST 1 12733-77
Shafts-ratchets with forward and reverse motion. Design and dimensions.
1 12733-77
- . .
WWW.RUSSIANGOST.COM
OST 1 12727-77
Shafts-ratchets. Design and dimensions.
1 12727-77
-. .
WWW.RUSSIANGOST.COM
OST 1 00843-77
Shafts-ratchets. Specifications.
1 00843-77
-. .
WWW.RUSSIANGOST.COM
OST 1 52813-87
Shafts-straps for calliper gages. Design and dimensions.
1 52813-87
- -. .
WWW.RUSSIANGOST.COM
OST 1 52815-87
Shafts-straps for incomplete smooth plug gages. Design and dimensions.
1 52815-87
- -. .
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM
OST 24.191.04-71
Shank hooks. Types and dimensions.
24.191.04-71
. .
WWW.RUSSIANGOST.COM
OST 1 52860-89
Shank radius end mill with mechanical fastening of hard alloy plates for titanium alloys processing. Design.
1 52860-89
. .
WWW.RUSSIANGOST.COM
OST 1 11578-74
Shank. Design and dimensions.
1 11578-74
. .
WWW.RUSSIANGOST.COM
OST 1 30013-77
Shankless titanium countersunk head lock bolts at the angle of 900and tolerance zone of h10 in diameter. Construction and dimensions.
1 30013-77
- 90 , h10 .
.
WWW.RUSSIANGOST.COM
OST 1 30016-77
Shankless countersunk head lock bolts at the angle of 120 degrees and driving of ZA (3) type. Construction and dimensions.
1 30016-77
- 120 3. .
WWW.RUSSIANGOST.COM
OST 1 30012-77
Shankless countersunk head lock bolts at the angle of 90 degrees and driving of ZA (3) type. Construction and dimensions.
1 30012-77
- 90 3. .
WWW.RUSSIANGOST.COM
OST 1 30014-77
Shankless countersunk head lock bolts at the angle of 120 degrees and a special transitional fit. Construction and dimensions.
1 30014-77
- 120 .
.
WWW.RUSSIANGOST.COM
WWW.RUSSIANGOST.COM