Give the minimum requirements to turn-on and turn-off the following
solid state unilateral switches: i. Silicon Rectifier, ii. Bipolar Junction Transistor, iii. Silicon Controlled Rectifier. (S-16 for 8 marks) The capacitance of reverse biased junction J 2 in the thyristor is Cj2 = 20 picofarad and can be assumed to be independent of the off-state voltage. The limiting value of the charging current to turn-n the thyrisotr is 16 milliampere. Determine the critical value of dv/dt. (S-16 for 5 marks) Draw two dimensional semiconductor layer diagram and compare the working of SCR and Triac. (W-16 for 7 marks) Unit Two Explain the principle of coordination among device rating, fuse rating and circuit breaker rating for over current protection of thyristor. (S-16 for 7 marks) Explain the mounting, triggering and current sharing of SCRs when operated in parallel. (S-13/16 for 7/6 marks) Unit Three Explain continuous and discontinuous current conduction in a single phase fully controlled converter. (S13 for 7 marks) Explain the operation of a 3-phase fully controlled bridge converter with inductive load. Also draw and explain the voltage and current wave forms for = 700. List the firing sequence of SCRs. (W-16 for 13 marks) A single phase fully controlled rectifier is operating from 230 V, 50 Hz, with firing angle of /4 rad and load current of 5 A (continuous ripple frequency). Calculate : i. DC output voltage, ii. input power factor. (S-16 for 7 marks) Explain the features of single phase converter. for 8 marks)
and asymmetrically configured half controlled
(W-16
Explain how to the output voltage of a phase controlled converter
varies? (W-16 for 5 marks) Unit Four
What do you mean by high frequency series inverter? Explain in detail.
Also differentiate between series inverter and parallel inverter. (S-15/16 for 8/7 marks) What is the role of feedback diode in inverter? What way it is different with freewheeling diode? (W-16 for 7 marks) Unit Five Explain principle and operation of single phase AC regulator. for 7 marks)