Professional Documents
Culture Documents
ENQ - SPEC - DS, FF & OTHER WATER, EWAGE SYSTEM - BPCL-KOCHI - Part-1 11 PDF
ENQ - SPEC - DS, FF & OTHER WATER, EWAGE SYSTEM - BPCL-KOCHI - Part-1 11 PDF
CLIENT
CONSULTANT
14.0
: 22.02.2014
W.O. NO.
: 3M0043
PAINTING:
Equipment and materials supplied shall be surface treated and painted as per EIL Painting Specification no.
6-79-0020 attached with this specification. A brief & relevant portion of that specification is given below.
Surface Preparation
Blast Cleaning:
The surface shall be cleaned by impingement of abrasive materials / copper slag at high velocity created by
clean and dry compressed air blast. This method will remove loosely adhered materials as well as
adherent scales and mill scales. Prior to application of blast, heavy deposit of oil and grease are removed
by solvent cleaning and excessive surface scales are removed by hand tools or power tool cleaning.
The surface of the metal shall be blast cleaned to a finish conforming SA 2.5 as per Swedish standard
preparation (or SSPC-SP-10 Std. of USA).
Painting System:
Pre-Erection/ Shop Primer
APPROVED.BY: D. MITRA.
PAGE 11 OF 13