Professional Documents
Culture Documents
Bluedio H User Manual 2014 12 21 19 49
Bluedio H User Manual 2014 12 21 19 49
headphone, please read this user manual in detail and keep it for
future use.
the battery.
head hone has been switched off.
. 1. Betore charging,_ make su~e th~g porfof headphone; plug t~e other
2. Plug USB cable .mto the c arg r er or other charging devrce.
side of USB cable rnto the U~~- c~~r~mains bright on the headphone.
Charging will start and the re '9 kes a proximately up to 1.5-2
3. Charging time of h~adpbh?~~ t~ red li~ht switch off after charging
hours, blue light rematns rrg 0
completed.
Be sura to notica the following guidelines when uslng you r headphone.
1. Should adjust volume and time reasonably when using the
Overview of H Bluetooth headphone:
H+ Bluetooth 4.1 Headset
Security Precautions: ln order to have a proper and safety use of the
headphone.
2. Please stop using the headphone in potentially hazardaus situation
to ensure your safety.
.
3. Please avoid using headphone to listen to music, make or recerve
calls to avoid distraction white driving.
4 . Put this product and its aceesseries sornewhere out of the reach of
children, to avoid a fatal danger caused by inappropriat_
e use.
.
5. Should keep water from entering the headphone dunng groomtng,
which may cause damage to the sound quality or the headphone.
6. Should avoid tuming the volume so high that you can '~ hear .
anything araund you. If you feel a tinnitus or the volume IS too hrgh,
please reduce the volume.
. . .
7. Stop using the headphone if you feel obvious discomfort, 1rntat1on
or have other adverse reactions.
8. The headphone should not be stared or use at temperatures below
-15oc (5F) or above 55C (131F) which may shorten headphone or
battery life.
Accessories:
Bluetooth headphone H+ 1pe.
User's manual 1pe.
USB charging cable 1pe.
Charger and battery; Please check the charging cable is orig inal or
not betore charging the Bluetooth headphone.
Warning:
.
Must use original charge cable to charge for the Bluetooth
headphone, otherwise it may damage the headphone. Thus, voltage
of charger must be 5V, electric current exceed 400mA (5V/400mA).
Chargng:
This headphone uses a non-detachable built-in rechargeable battery.
ln order to prevant damage of the headphone, please do not remave
1
~
.
SD ca rd slot
Audio transfe
port
Pia / Pause button
Pairlng mode:
Keep press the MF button until blue lights remains bright.
Reconnection mode:
Keep press the MF button until blue light blinks.
Switch off:
Keep press the MF button unti! blue light blinks, the headphone will
be switched off.
Btuetooth pairing :
1. Keep the distance between the headphone and mobile phone
within 1 meter. The closer, the better.
2. Activate the headphone, ensure it antered topairing mode, blue
lights remains bright.
3. lnitiate Bluetooth function of mobile phone (or other device needed
2