Professional Documents
Culture Documents
OPTUS Metro Swap Project EMUA Quick Installation Manual For BTS3900L V2.0
OPTUS Metro Swap Project EMUA Quick Installation Manual For BTS3900L V2.0
Huawei Confidential
1|Page
Revision:
Version Date
v1.0
V2.0
Comment
Author
Alex
Cheng
Alex
Cheng
2|Page
EMUA is installed at the bottom of BTS3900L cabinet. For the reason of heat dissipation, gap
need to be kept between BBU and EMUA and between EMUA and the Bottom of Rack.
3|Page
The transmission cable and power cable are connected according to this graph. For the
transmission cable, the two ends are with different type. One end is RS485 which connects
to RS485 port on EMUA and the other end is RJ45 which connects to UPEN (MON1).
4|Page
Alarm Cables are connected from EMUA to DDF (new), and cascaded the new DDF to the
existing DDF which connected to Sensors. In the above graph, the new DDF are shown in red
colour, and the existing DDF are shown in blue colour.
The details of the cable pairs need to be done according to the following Tables.
Normally one site doesnt have all the sensors installed currently. So only the Sensor
whose name can be found from the existing DDF labels need to be connected.
5|Page
6|Page
7|Page
Krone Layout
Krone layout Doc
Krone jumper cables requirement
8|Page
Alarm Test
9|Page