You are on page 1of 2

Aqueous barium nitrate [Ba(NO3)2] reacts with sulfuric acid [H2SO4(aq)] to

yield a barium sulfate [BaSO4] precipitate and nitric acid [HNO3(aq)]

Silver nitrate [Ag(NO3)2] reacts in solution with potassium chromate [K 2CrO4]


to yield a silver chromate [AgCrO 4] precipitate and soluble potassium nitrate
[KNO3]

Solid calcium carbonate [CaCO3] reacts with hydrochloric acid [HCl] to yield
aqueous calcium chloride [CaCl2], carbon dioxide gas [CO2], and liquid water
[H2O]

Aqueous zinc chloride [ZnCl2] reacts with dihydrogen monosulfide gas [H 2S] to
yield a zinc sulfide [ZnS] precipitate and hydrochloric acid [HCl]

Magnesium nitrate [Mg(NO3)2] reacts in solution with potassium hydroxide


[KOH]to yield a magnesium hydroxide [Mg(OH) 2] precipitate and soluble
potassium nitrate [KNO3]

Solid aluminum hydroxide [Al(OH)3] reacts with nitric acid [HNO3] to yield
soluble aluminum nitrate [Al(NO3)3] and liquid water [H2O]

Aqueous lead (IV) nitrate [Pb(NO 3)4] reacts with aqueous sodium sulfate
[Na2SO4] to yield a lead (IV) sulfate [Pb(SO 4)2] precipitate and soluble sodium
nitrate [NaNO3]

Aqueous sodium hydroxide [NaOH] reacts with carbon dioxide [CO 2] gas to
yield soluble sodium carbonate [Na2CO3] and liquid water [H2O]

Solid magnesium oxide [MgO] reacts with hydrochloric acid [HCl] to yield a
solution of magnesium chloride [MgCl2] and liquid water [H2O]

Solid zinc metal [Zn] reacts with sulfuric acid [H 2SO4] to yield aqueous zinc
sulfate [ZnSO4] and hydrogen gas [H2]

Solid ferric oxide [Fe2O3] reacts with solid aluminum metal [Al] to yield solid
aluminum oxide [Al2O3] and solid iron metal [Fe]

Given the following equation: Na2O + H2O -> 2 NaOH


a. How many grams of NaOH is produced from 1.20 x 10 2 grams of Na2O?
b. How many grams of Na2O are required to produce 1.60 x 102 grams of
NaOH?
c. What is the % yield of a and b if 145g NaOH is recovered?
Given the following equation: 2NaClO3 -> 2 NaCl + 3 O2
a. 12.00 moles of NaClO3 will produce how many grams of O2?

b. How many grams of NaCl are produced when 80.0 grams of O 2 are
produced?
Given the following equation: Cu + 2 AgNO 3 -> Cu(NO3)2 + 2 Ag
a. How many mole of Cu are needed to react with 3.50 moles of AgNO 3?
b. If 89.5 grams of Ag were produced, how many grams of Cu reacted?
Molten iron and carbon monoxide are produces in a blast furnace by the
reaction of iron (III) oxide and coke (pure carbon). The reaction is: Fe 2O3 + 3 C
-> 2 Fe + 3 CO.
a. If 25.0 g of pure Fe2O3 is used and 66g C, how many grams of iron can be
produce?
b. What is the LR? ER?
c. How much of ER is left after reaction?

You might also like