Warning: This procedure will erase All images and reset all system settings to FACTORY default.
1) Remove power and Network cables from the FAX-30
2) Remove the cover from the FAX-30 2) Set dip switch S1 as follows: S1-#1:On S1-#2:Off S1-#3:Off S1-#4:Off 3) Power ON the FAX-30. (LED will flash 1 time then remain off for approx. 3 minutes) 4) Wait for LED to begin flashing at 1 time per second. (Master Reset is now complete). 5) Power OFF the FAX-30. 6) Reset S1 - #1 to the OFF position. (Make sure all segments of S1 is set to the OFF position for normal operation) 7) Replace the FAX-30 Cover 8) Turn on the FAX-30