Professional Documents
Culture Documents
Brosura Comes PDF
Brosura Comes PDF
Index
Values....... ........................................................................02
General presentation..................................................03
History.......................................................................04
Manufacturing Capability.............................................05
Quality...............................................................................06
Target Industries............................................................07
References.....................................................................19
COMES S.A. Values
Values
Tradition & Experience
With over 35 years of experience in producing pressure vessels, COMES
ensures manufacture in compliance with the customer requirements. We
gained wide experience in providing specific solutions with distinct
advantages in cost and performance for our customers.
General presentation
COMES is a leading manufacturer of equipments and spare parts for chemical,
petrochemical, gas & oil and nuclear industries. Our mission is to answer our
customers requirements and expectations by promptly offering qualitative products
and services, without harming the environment, health and safety.
Founded in 1977, as Mechanical Plant of the SC COMES SA is one of the leading Romanian
Chemical Complex of Synthetic Fibres and Yarns manufacturers of pressure vessels and
Savinesti (UMCFFS), COMES was created as equipments. With over 35 years of tradition, we
a supplier of equipments and spare parts for apply especially for petrochemical, gas&oil and
Savinesti Chemical Platform. nuclear industries.
Following the positive evolution after the buy-out The products specific to our company are: heat
and modernization investments, COMES became exchangers, tube bundles, air coolers with fin
one of the main Romanian suppliers for heat tubes, columns with internals equipments (trays),
exchangers, pressure vessels (tanks, industrial boilers with steam/hot water,
reactors, boilers, etc.), fin tubes heat exchangers, reactors, condensers, vessel, tanks, Skids,
columns, hot water/steam boilers for complex metallic structures, pump bodies.
chemical, petrochemical and nuclear industry.
The vessels are made of carbon steel, stainless
SC COMES SA Savinesti is part of the industrial steel, duplex, superduplex, clad steel (stainless,
Group of Companies CONEX IASI, one of the most monel), Cu-Ni alloy.
dynamic industrial groups in Romania.
COMES S.A. History
History
COMES S.A. Savinesti Neamt was founded the name of Mechanical Plant of the Chemi-
1977 cal Complex of Synthetic Fibres and Yarns Savinesti.
COMES S.A. was registered, under the 1213/20.11.1990 government law, as a joint stock
1991 company and changed its name in COMES Savinesti (Mechanical Company for Special
Equipments).
The year when COMES S.A. Savinesti becomes part of CONEX Group of Companies,
2003 one of the most important industrial groups in Romania. Comes S.A. receives Quality
Management System autorization from CNCAN, for activities in nuclear industry.
Comes S.A. earns Quality Management System Certification acc. to EN ISO 9001:2000,
2004 by TV Thuringen. Comes S.A. obtains Certification according to 97/23 EC Norm, by
ISCIR CERT for designing and manufacturing of underpressure equipments.
A period when Comes S.A. begins to manufacture complex technological equipments
2004-2005 for Unit no. 2 for the Nuclear Plant Cernavoda (columns, tanks, heat exchangers,
vessels).
Comes S.A. earns certification according to AD 2000-Merkblatt HP 0, TDR 201, AD
2005 2000-Merkblatt HP 100R und DIN EN 729-2, 97/23 EC Norm by TV Sud Gruppe for
pressure vessels manufacturing.
Comes S.A. receives Certification of Environmental and Occupational Health and Safety
2006 System according to EN 14001:2005 and OHSAS 18001:2004 by SRAC and IQNet.
Manufacturing Capability
Mechanical processing shop: Boiler shop:
Machining of parts with diameters up to 1000 Plate bending on ABKANT for max. thickness of
mm and lengths up to 5000 mm, on normal 16 mm.
lathes. Plate Roll machine: type SERTOM MODEL for
Machining on carousel lathes of parts with max. thickness of 63 mm.
diameter up to 2500 mm and heights up to 1500 Tube bending at various radius and spatial
mm. angles for diameters ranged between 16 and 60
Machining on horizontal milling and boring mm.
machines. Tube expanding in tube sheets using electrical
Portal milling machine of parts with lengths up equipment control of torque during the expanding
to 5000 mm, width of 1600 mm and heights of and stop at a preestablished time, for tubes with
1200 mm. diameters ranged between 12 and 108 mm and
thickness between 1.5 and 4.6 mm.
Machining on universal milling machine.
Machining on drilling machines.
Machining on radial drilling machines.
Assembly through welding procedures:
MMA (SMAW) manual welding with shield elec-
trodes.
Primary sectors: TIG (GTAW) manual welding in inert gas
Oxy-gas cutting thickness up to: 120 mm. medium.
Plasma cutting thickness up to: 45 mm. GTAW automatic orbital welding in pipe tube
Mechanical cutting. plate.
Heat treatment post welding in furnace with SAF (SAW) submerged arc welding.
6 diesel burners, dimensions: 12000 x 5000 x MIG-MAG (FCAW) welding wire for gas
3750 mm. shielded inert and active.
INDUCAL Installation revealing installation by
medium, frequency (2800 Hz). Surface protection:
Free blasting operations with metal grains, grid
or electro corundum.
Test Laboratories: Painting operations using AIRLESS equipment.
Nondestructive tests: RT, UT, PT, MT.
Pickling& passivation.
Destructive tests: stretching tests, bending
tests, hardener tests and resilience tests.
Software Tools
PV ELITE, AUTOCAD, ZWCAD;
Solid Works Simulation Professional; Solid Works Standard;
SANTAMBROGIO DESIGN SOFTWARE EN13445, AD200, ASME code;
AXIS VN12 Structural calculus; CC-STEADY STATE, CC-THERM, C.
COMES S.A. Quality
Quality
Certifications and authorisations:
Management System Certification EN ISO 9001:2008, by TV Thuringen
Environmental System Certification acc. to SR EN ISO 14001:2005, issued by CertRom
Certificate for Occupational Health and Safety System SR OHSAS 18001:2008, issued by CertRom
Certificate for Design and Manufacturing of Pressure Equipments acc. to Directive 97/23 EC (GD
584/2004), issued by ISCIR CERT
Certificate of Authorization ASME code, U stamp, for Manufacturer of pressure vessels issued by
Hartford Steam Boiler Inspection & Insurance Company of Connecticut
Certification in compliance with the requirements from AD 2000 HP0; EN ISO 3834-2
ISCIR authorisation for assembling and repair of hot water/ steam boilers
ISCIR authorisation for assembling and repair of hot water/ steam piping
ISCIR authorisation for assembling and repair of pressure vessels
ISCIR authorisation for non-destructive laboratory with RT, MT, PT, UT(f,s,t), UT(g) examination
methods
Authorisation of radioactivity safety for products Barrels from stainless steel for radioactive
wastes intermediary storage
Available examinations:
Radiographic examinations
Ultrasonic examinations
Ultrasonic examination of forging and casting
Ultrasonic thickness measurement
Penetrant liquid examination
Magnetic particle examinations
Mechanical testing: tensile, impact, hardness, resilience, metallographic analyzes, etc
COMES S.A. Target Industries
Petrochemical Industries
Heat Exchanger
Tube Bundles
Tanks
Fin Tube Heat Exchanger
Columns with Internals (trays with sieves,
bubbles)
Condensers
Reactors
Deaerators
Technological Equipments SKID type
Gas Separators
Nuclear Industries
Pressure Vessels
Heat Exchangers
Venting equipments
Steel Structures
Barrels
Forgings Parts
Hydraulic Cylinders
Heat Treatment Services
Heat Exchangers
Preheaters;
Coolers;
Condensers;
Vaporizer;
Economizer
Technical characteristics:
Diameter: 4500 mm;
Pressure: 150 bars;
Weight: 50 t.;
Length: 20 m.;
Shell thickness: 50 mm.
COMES S.A. Products & Equipments
Materials:
Carbon steel;
Stainless steel;
Duplex/Superduplex;
Cu-Ni alloy;
Clad steel (stainless, monel).
COMES S.A. Products & Equipments
Tube Bundles
Technical characteristics:
Diameter: 4500 mm.;
Pressure: 150 bars;
Weight: 50 t.;
Tube diameter: 12 up to 76 mm;
Tube Plate thickness: 220 mm.
COMES S.A. Products & Equipments
COMES S.A. Products & Equipments
Technical characteristics:
Diameter: 4500 mm;
Pressure: 150 bars;
Weight: 50 t.
Technical characteristics:
Volume: up to 200 mc;
Diameter: 4500 mm;
Pressure: 150 bars;
Weight: 50 t.;
Shell thickness: 50 mm.
Materials:
Carbon steel;
Stainless steel;
Duplex/ Superduplex;
Cu-Ni alloy;
Clad steel (stainless, monel).
COMES S.A. Products & Equipments
Separators
two-phasic
three-phasic
Columns
Columns are chemical equipments used in
fractionation, distillation, adsorption operation, etc,
during technological process. Depending on the way
the phase contacts are made, columns are classified
in:
Technical characteristics:
Diameter: 4500 mm;
Pressure: 150 bars;
Weight: 50 t.
Length: 30000 mm.
Materials:
Carbon steel;
Stainless steel;
Duplex/ Superduplex
Cu-Ni Alloy;
Clad Steel (stainless, monel).
Pump Bodies
Discharge head;
Motor stool;
Column pipe;
Coupling guard;
Adapter;
Shell;
Bearing braket.
Materials:
Carbon steel;
Stainless steel;
Duplex/ Superduplex.
COMES S.A. National References
National references
Petromidia Navodari
CET Arad
CET Pitesti
Rafo Onesti
COMES S.A. National References
Egger Radauti
COMES S.A. Foreign References
Foreign references
Beneficiary Country
Beneficiary Country