You are on page 1of 2

Radio systems

Removing and installing CD player

Notes:

The CD player can be either combined with the radio only or also with the CD changer.
Switching between CD player and CD changer is performed manually on the CD player.

The CD player is connected to the radio, if a CD changer is fitted it is connected to the CD


player.

If the CD player plays commercially available CDs, but not home recorded CDs, there is no
fault with the CD player. An exchange of the CD player is for this reason not permissible.

No mix CDs (CDs where computer data and music are stored together on a CD).

When a CD player is retrofitted it can be operated with a "BETA" and "GAMMA" radio 05.98 in
conjunction with the relevant retrofit sets.

The radio functions must be recoded if a CD player is retrofitted.

=> "Guided fault finding" on Vehicle Diagnosis, Testing and Information System VAS 5051.

Special tools, testers, measuring


units and auxiliary items required

3316 Releasing tool

The radio release tool 3316 consists of


two identical parts.

Removing:

Remove the radio before


removing the CD player =>
page 91-31
Slide radio release tool 3316
into the release slots -arrows-
until they locate.

Pull CD player out of the


dash panel using the grip rings
of the release tools.

Notes:

When doing this the radio


release tool 3316 must not be
pushed to the side or tilted.
To remove the release tools
from the CD player the locating
lugs on the side of the CD
player must be pressed
inwards.

Installing:
Connect plug to CD player.
Slide CD player level into the
dash panel, until it locates in
the assembly frame.

Connect plug to radio.

Slide radio level into the


dash panel until it locates in
the assembly frame.

Contact assignment of the multi-pin


connector on CD player

Multi-pin connector "A"

The multi-pin connection "A" is identical


to the multi-pin connection I, part 3,
blue on "BETA" and "GAMMA" radios

13 - CD changer, DATA IN
14 - CD changer, DATA
OUT

15 - CD changer, CLOCK

16 - CD changer, terminal
30 voltage supply (+)

17 - CD changer, control
signal

18 - CD changer, left and


right channel, earth

19 - CD changer, left
channel, CD/L

20 - CD changer, right
channel, CD/R

Multi-pin connector "B"

1 - Earth for the CD player,


terminal 31

2 - Illumination for the CD


player, terminal 58d

You might also like