ORIGINAL
Ceruicat No, |
SHAS 20@GG |
|
CERTIFICATE OF ORIGIN
F
oO |
THE PEOPLE'S REPUBLIC OF CHINA {
8. Meane of transport ana route 5: For comtying authorty use ohiy fete
Tink SNAIL, AINA 70 Ho GoM. MIMI. VaB) WK AF za
|
|
| + Seite agent aosirasn |
UET Nt
i =f
6. Marks and numpers_ | 7: Number and kind of packagesidesenption of aooas ome TOURED FP 0 Worber
|
dae
| feces” |
sve 1) Pace on sce ' |
MOE. | |
Reames: Screws Hs
‘1 Dectaraton bythe exporter 12. Coneation
career nae Secs ath above dows and stoners] Nera eros
se come tat al the goods were produced in China and tat hey samp
‘NA Ie Flues of Cri of tha Poodles Repubc g Cone,
aiid tte: dat) ogOF INSPECTION
1506 14-026 Dated: 2018, 12.14
Order No 1505218 Item: Paseu
lot No: 21599 Size(s) 16
Hat No. : 21399006, Pieces 20,58
Moad Marks: FADE Class 0
Surface finished: Dg
Manufacturer: ABST PORT FASTENER MFC co, Packing: ox pakeing
This Us to certify thas above mentioned bolts are produced and inspected according tot
Specifications Figo
Mechanical Properties: CL10
Threads Class /
Surface Finish DIN267 part 9 with reward wo qi cpu
Macorfats Proscribed material 454
Material Sources yuan Li gang
Chamical Coaposi tion ae SUP re pee
Min-Nax 0420.90 0.17-0.57 0.50-8.90 0.095 324-34 32.90-33.00 goo
he BI-46 —3.72-3.80 0
Mechanical Propertities: Standard Test_results Samples REI Remarks
Core Hardness (HRC) 38-45, 41-43 2 0
Tensile strength (¥/an')
Yield strength (/am?)
Elongation (%)
Threads Standard Testresults Samples RET Remarks
» piteh
4 angle of threads
threads
threads
Surtuce Finished: HoT oI GALVaNzeD and
Thickness (uw)
QC Manager
Aestport Fastener ManufacturingHANGZHOU JYNXIA IMP. &EXP.CO.,LTD
EEA NE ACTURERS INSPECTION CERTIFICATE (AS PER EN10204-3-1B)
rN
s/c
eae KHAI NGUYEN CO,LTD.
4 ee Wa INVOICENO: 151SV203 Qty: }6 MPCS
HAI KEY a- 1 7(P 0H: 111203) i
scription: _ASTMAS63M_HEAVY HEX NUTS CL-10S
Specification: M16X2,00P, HDG Manne: SOE]
t TALLIED |
‘Chemical Analysis THAM KHAO!
| Material: [| SWRCH35K Heat No, 0842002421
Element | C Mn SI P S| che | fantisyeen
| % 36 2 lems |e Sisieis(iee4 [abe ee S|
Mechanical Properties
Test Item ers Standard Results | Sampling | Pass
| Hardness (HRC) 26-38 29-32 5 3
Proof Load The proof load of 19SKN shall be applied against the nut in an | Removed 5 =
| ‘axial dietion and shall be held for 105.The nut shall resist the | by hand
| loaf without failure by stripping or rupture, and shall be
ke removable by hand afer the loads released |
Dimensions of Spee
Test Item Spec. Inspection Results _[ Sampling |_Rej | Remark
Width across flats Max-min27-26.16 | Max-min 26.54-26.24 | _20 0 Ok
Width across angle Max-min31.18-29.56 | Max-min30.24-29.64 20 oO Ok
| Height Max-min17.10-16.40 | Max-min16.66-16.52 20 0 Ok
_ Bore diameter Max-min14.20-13.86 | Max-min14.18-13.90 20 0 Ok
Go Gauge Uae Co ea BS 0 Ok
6H OK 20 0 Ok
Min 40 bm 4-46 20 0 Ok
ACC. TO ASMT A563M OK 20 | 0 Ok
HEAT TREATMENT
(Quench at850Cabout 6Ominutes, tempering at 400°Cabout 70minutes...
NOTE: We hereby certify that all the above results are original from our actual testing, and the products
have proved to comply with the relevant standards.
‘Signed on Behalf of HANGZHOU JYNSHA IMP &EXP CO. LTD.
INSPECTED BY + 8% (OC MANAGER: 2015-02-08,3. 1B Certificate
fo. 180704-001 Dated: 2018.8, 10
| THYCHGAIAL Le!) sso1207 ten: ‘2050
KHAI NGUYEN; 21337 Size(s) 16845,
eG 21337001 Pieces: 0.06
ROS As25u06 Class a8
Surfoce finished: | toe
Mhoufocturer: ABST PORT FASTENER WF co Packing Bor patcing
This ia to cortfy that above mntioned bolts are produced and inspected according to:
Specifications; asgon
Hechenical Properties: Cui
Thread Class 6h
Suface Finish: DING part 9 vith re
terials Proserited mterial 356
Material Sourees Sh gang
Chanical Comps tion Ce kd ee
Minter 032098 e145 ooram