Professional Documents
Culture Documents
NZ Catalogue 2012 - Bolts, Nuts, Washers
NZ Catalogue 2012 - Bolts, Nuts, Washers
Threaded Rod
Hex Bolts & Set Screws Hank Bush Nuts
Metric 18-20 Metric 32
Metric Molybonded 22 UNC 36
UNC & BSW (1/2) 22-24
UNF 25 Flange Nuts
32
Metric
Bumax Higher Tensile
21
Bolts & Set Screws - Metric
Coupling Nuts
32
Coach Bolts Metric
Metric 26
Tee Nuts
UNC 27 Metric 37
UNC
Joint Connector Bolts (JCB),
Nuts, Cross Dowels Metric
Barrel Nuts 37-38
Other types available.
Threaded Rod
Metric (1, 2, 3 mtr) 28 Square Nuts
UNC & BSW (1/2) 30 37
30 UNC
UNF
Round/Flat Washers
Bumax Higher Tensile Metric 39
28
Threaded Rod Metric Imperial 40
Wing Nuts
Metric 32 Ureseal 46
UNC 36
Metric
B Bolt (DIN931) S Set Screw (DIN933)
Code: BHM.. DIN931/933 Fully Threaded
B Bolt. S Set Screw (fully threaded).
M4 M5 M6 M8 M10 M12 M14 M16 M20 M22 M24 M27 M30 M33 M36
Pitch (mm) 0.7 0.8 1.0 1.2 1.5 1.7 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0
Hex Head Height (mm) 2.8 3.5 4.0 5.3 6.4 7.5 8.8 10.0 12.5 14.0 15.0 18.0 18.7 21 23
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
BOLTS
Metric (cont.)
B Bolt (DIN931) S Set Screw (DIN933)
Code: BHM.. DIN931/933 Fully Threaded
B Bolt. S Set Screw (fully threaded).
M4 M5 M6 M8 M10 M12 M14 M16 M20 M22 M24 M27 M30 M33 M36
Pitch (mm) 0.7 0.8 1.0 1.2 1.5 1.7 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0
Hex Head Height (mm) 2.8 3.5 4.0 5.3 6.4 7.5 8.8 10.0 12.5 14.0 15.0 18.0 18.7 21 23
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Metric (cont.)
B Bolt (DIN931) S Set Screw (DIN933)
Code: BHM.. DIN931/933 Fully Threaded
B Bolt. S Set Screw (fully threaded).
M4 M5 M6 M8 M10 M12 M14 M16 M20 M22 M24 M27 M30 M33 M36
Pitch (mm) 0.7 0.8 1.0 1.25 1.5 1.75 2.0 2.0 2.5 2.5 3.0 3.0 3.5 3.5 4.0
Hex Head Height (mm) 2.8 3.5 4.0 5.3 6.4 7.5 8.8 10.0 12.5 14.0 15.0 18.0 18.7 21 23
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
BOLTS
Bolts & Set Screws
B Bolt (DIN931) S Set Screw (DIN933)
Code: BHMB.. DIN931/933 Fully Threaded
Made from the best material in the market. Developed for demanding environments.
The BUMAX fasteners are manufactured from a variant Water, aggressive liquids, vibration, high pressure,
of acid-proof Swedish steel SS 14.2343. The striking extreme temperatures - todays constructions must
feature of the stainless steels composition is its low be able to withstand many harsh conditions and
Carbon content and increased content of Chromium, forces. It is here that the difference between Bumax
Molybdenum and Nickel. Laboratory tests and practical products and conventional fasteners can be most
application have shown that the special composition clearly seen. When it comes to high strength, weight
gives BUMAX products unsurpassed perfomance in a minimisation or a corrosive environment, the Bumax
number of vital areas. 88 and 109 fasteners are the superior solution.
(Lubricated) Metric
Code: BHM..MB DIN931
3/16BSW 1/4UNC 5/16UNC 3/8UNC 7/16UNC 1/2UNC 1/2 BSW 5/8UNC 3/4UNC 7/8 UNC 1 UNC
T.P.I. 24 20 18 16 14 13 12 11 10 9 8
Hex Head Size A/F (inch) 0.312 0.438 0.5 0.562 0.625 0.75 0.82 0.938 1.125 1.312 1.5
Hex Head Height (inch) 0.139 0.163 0.211 0.243 0.291 0.323 0.343 0.403 0.483 0.563 0.627
Std Thread Length for Bolts (inch) Full 0.75 0.875 1 1.125 1.25 N/A 1.5 1.75 2 2.25
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Notes:
(1) Thread form for imperial Hex Bolts is UNC except for 1/2 for which both BSW and UNC are available
(2) Standard Length of Thread:
- The thread lengths shown above apply to bolts 6 and less
- For bolts exceeding 6 in length add 1/4 to the thread length
BOLTS
UNC & BSW (cont.)
Code: BHC.. B Bolt S Set Screw (Fully Threaded)
3/16BSW 1/4UNC 5/16UNC 3/8UNC 7/16UNC 1/2UNC 1/2 BSW 5/8UNC 3/4UNC 7/8 UNC 1 UNC
T.P.I. 24 20 18 16 14 13 12 11 10 9 8
Hex Head Size A/F (inch) 0.312 0.438 0.5 0.562 0.625 0.75 0.82 0.938 1.125 1.312 1.5
Hex Head Height (inch) 0.139 0.163 0.211 0.243 0.291 0.323 0.343 0.403 0.483 0.563 0.627
Std Thread Length for Bolts (inch) Full 0.75 0.875 1 1.125 1.25 N/A 1.5 1.75 2 2.25
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Notes:
(1) Thread form for imperial Hex Bolts is UNC except for 1/2 for which both BSW and UNC are available
(2) Standard Length of Thread:
- The thread lengths shown above apply to bolts 6 and less
- For bolts exceeding 6 in length add 1/4 to the thread length
UNC (cont.)
Code: BHC.. B Bolt S Set Screw (Fully Threaded)
3/16BSW 1/4UNC 5/16UNC 3/8UNC 7/16UNC 1/2UNC 1/2 BSW 5/8UNC 3/4UNC 7/8 UNC 1 UNC
T.P.I. 24 20 18 16 14 13 12 11 10 9 8
Hex Head Size A/F (inch) 0.312 0.438 0.5 0.562 0.625 0.75 0.82 0.938 1.125 1.312 1.5
Hex Head Height (inch) 0.139 0.163 0.211 0.243 0.291 0.323 0.343 0.403 0.483 0.563 0.627
Std Thread Length for Bolts (inch) Full 0.75 0.875 1 1.125 1.25 N/A 1.5 1.75 2 2.25
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Notes:
(1) Thread form for imperial Hex Bolts is UNC except for 1/2 for which both BSW and UNC are available
(2) Standard Length of Thread:
- The thread lengths shown above apply to bolts 6 and less
- For bolts exceeding 6 in length add 1/4 to the thread length
ADVERT
Long lasting natural performance & protection.
Pure natural lanolin, stops rust forming, even in places you cant reach
Forms a moisture barrier preventing corrosive agents penetrating the
surface.
Frees up seized parts - a perfect general workshop lubricant.
Resist being washed off surfaces, providing the ultimate protection in
extreme environments.
BOLTS
UNF
Code: BHF.. B Bolt S Set Screw (Fully Threaded)
T.P.I. 32 28 24 24 20 20 18
Hex Size A/F (inch) 0.3110 0.438 0.5 0.562 0.625 0.75 0.938
Head Depth (inch) 0.1280 0.163 0.211 0.243 0.291 0.323 0.403
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Cross
JCBs 304 Barrell Nuts 304 Dowels 304 ZINC
M6 M6 M6 Slot Phillips
M6 X 35 M6 M6 X 12
M6 X 40 M6 X 13
M6 X 50 M6 X 20
M6 X 60
M6 X 70
M6 X 80
M6 X 100
Threaded Rod
(1, 2, 3 mtr) Metric
Code: SDM4/6... DIN975
M20 X 3 MTR
Tensile strength: unmarked Threaded Rod is made to Class 50 (500 MPA) tensile strength minimum, but some is
made to Class 70 (700 MPA) which can be checked against Test Certificates at the time of order.
Bumax 88
Class 80*
M10 X 1M
Bumax 88
M12 X 1M
BUMAX 88 is a stainless steel grade with increased
M16 X 1M strength and corrosion resistance.
Other sizes
cut to order
Threaded Rod
UNC & BSW (1/2)
Code: SDC/W..
316 316
3/16 (10-24) X 3FT 9/16 X 3FT
1/4 X 3FT 5/8 X 3FT
5/16 X 3FT 3/4 X 3FT Shorter lengths
3/8 X 3FT 7/8 X 3FT cut to order
316
3/16 UNF (10-32) X 3FT
1/4 UNF X 3FT
5/16 UNF X 3FT
3/8 UNF X 3FT
7/16 UNF X 3FT
1/2 UNF X 3FT
5/8 UNF X 3FT
3/4 UNF X 3FT
B8 B8M B8 B8M
(304) (316) (304) (316)
Stud ASTM A193 CL2* Heavy Hex Nut ASTM A194 CL2*
Also available in grades: B7, B7M, L7, L7M, B16, B8T, Duplex, Super Duplex, Monel, Inconel, Hastelloy, Titanium,
Nickel, Zirconium, Carpenter 20, Incoloy.
NUTS
Hex Nut Nyloc Nut Lock (Jam) Nut All Stainless
Locking Nut
Size M2.0 M2.5 M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36
Coarse Pitch: 0.40 0.45 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 2.50 3.00 3.00 3.50 3.50 4.0
Hex Nuts
A/F 4.0 5.0 5.5 7.0 8.0 10.0 13.0 17.0 19.0 22.0 24.0 27.0 30.0 32.0 36.0 41.0 46.0 50.0 55.0
Thickness 1.6 2.0 2.4 3.2 4.0 5.0 6.5 8.0 10.0 11.0 13.0 15.0 16.0 18.0 19.0 22.0 24.0 26.0 29.0
Nyloc Nuts
A/F 5.0 5.5 7.0 8.0 10.0 13.0 17.0 19.0 22.0 24.0 27.0 30.0 32.0 36.0 41.0 46.0 55.0
Thickness
3.5 4.0 5.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.5 20.0 22.0 24.0 27.0 30.0 36.0
A/F 7.0 8.0 10.0 13.0 17.0 19.0 24.0 30.0 36.0
Thickness 2.2 2.7 3.2 4.0 5.0 6.0 8.0 10.0 12.0
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
NB: these are nominal measurements and generally the maximum size of the tolerance range.
If measurements are critical, please check them.
Dome Nut Dome Nut Wing Nut Hank Bush Nut Flange Nut
2-Piece (polished) 1-Piece
Coarse Pitch: 0.50 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 3.00
A/F 5.5 7 8 10 13 17 19 22 24 30 36
A/F 5.5 7 8 10 13 17 19 22 24 30 36
Thickness 5.0 8.0 10.0 12.0 15.0 18.0 22.0 25.0 28.0 34.0 42.0
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Coupling Nuts
Code: NTCPM.. DIN6334
NUTS
Hex Nut Lock (Jam) Nut
Hex Nuts
Metric Left Hand
Code: NTHM4..L DIN934
304
M6
M8
M10
M12
M14
M16
For dimensions, see page 32.
SS SS
M10
M12
Bumax 88 & 109
M16
BUMAX 88 & 109 is a stainless steel grade with
(1)
Class 80 (800 MPA Tensile Strength) 316LHiMo increased strength and corrosion resistance.
(2)
Class 100 (1000 MPA Tensile Strenth) 316LHiMo
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
NUTS
Hex Nut Nyloc Nut Lock (Jam) Nut
5-40 UNC 6-32 5/32 10-24 3/16 1/4 5/16 3/8 7/16 1/2 1/2 5/8 3/4 7/8 1
Size
(1/8) UNC BSW UNC BSW UNC UNC UNC UNC UNC BSW UNC UNC UNC UNC
T.P.I. 40 40 32 24 24 20 18 16 14 13 12 11 10 9 8
Hex Nuts
Hex Nuts
A/F 0.310 N/A 0.271 0.370 0.320 0.438 0.500 0.562 0.688 0.750 0.815 0.938 1.125 1.312 1.500
Thickness 0.108 N/A 0.110 0.120 0.160 0.226 0.273 0.337 0.385 0.496 0.469 0.559 0.665 0.776 0.887
Nyloc Nuts
Nyloc Nuts
A/F 0.368 N/A N/A 0.245 0.368 0.433 0.497 0.554 0.618 N/A 0.743 0.927 1.05 1.243 1.430
Thickness 0.243 N/A N/A 0.143 0.247 0.314 0.348 0.451 0.461 N/A 0.590 0.750 0.881 0.984 1.050
Lock (Jam)Nuts
Lock (Jam) Nuts
A/F N/A
0.430
0.560 0.740 0.927
1.090
N/A
Thickness N/A
0.161
0.279 0.314 0.368
0.424
N/A
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
10-24 UNC 1/4 5/16 3/8 1/2 1024 UNC 1/4 5/16 3/8
Size (3/16) UNC UNC UNC UNC Size (3/16) UNC UNC UNC
T.P.I. 24 20 18 16 13 T.P.I. 24 20 18 16
A/F (inch) 0.37 0.43 0.49 0.56 0.74 A/F (inch) 0.36 0.43 0.55 0.61
Thickness (inch) 0.30 0.43 0.49 0.56 0.78 Thickness (inch) 0.39 0.47 0.53 0.63
Nuts UNF
Dome Nut
Hex Nut Nyloc Nut Lock (Jam) Nut
(1-piece)
For dimensions, see the UNC dimensions above & on page 35.
304 304
10-24 UNC (3/16) M6
1/4 UNC
5/16 UNC
304
10-24 UNC (3/16)
Barrel Nuts
Countersunk Countersunk
Socket 316 Slot 316
Int. Thread Length 13.5mm 15.6mm 19mm 21.5mm W 7.04mm 8.14mm 10.03mm 12.55mm
W 6.35mm 7.8mm 9.5mm 11.1mm Int. Thread Length 24.15mm 25.75mm 30.20mm 30.20mm
Code: NTBPM4.. M6
In Stock
D 15mm
H 16mm
T 14mm
Int. Thread Length 12mm
W 9mm
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
M2 M12
M2.0 X 5 X 0.3 M12 X 24 X 1.5
M2.5 M12 X 24 X 2.5
M2.5 X 6 X 0.5 M12 X 36 X 3.0
M3 M14
M3 X 7 X 0.5 M14 X 28 X 2.5
M4 M16
M4 X 9 X 0.9 M16 X 30 X 1.5
M4 X 12 X 1.0 M16 X 30 X 2.0
M5 M16 X 30 X 3.0
M5 X 10 X 1.0 M16 X 48 X 3.0
M5 X 15 X 1.2 M16 X 50 X 3.0
M6 M18
M6 X 12.5 X 1.0 M18 X 34 X 3.0
M6 X 12.5 X 1.6 M18 X 54 X 6.0
M6 X 18 X 1.6 M20
M6 X 25 X 1.6 M20 X 37 X 2.0
M7 M20 X 37 X 3.0
M7 X 35 X 4.0 M20 X 60 X 4.0
M8 M22
M8 X 14 X 0.9 M22 X 39 X 3.0
M8 X 16 X 1.2 M24
M8 X 16 X 1.6 M24 X 44 X 3.0
M8 X 17 X 1.2 M24 X 44 X 4.0
M8 X 24 X 2.0 M27
M8 X 25 X 3.0 M27 X 50 X 4.0
M8 X 32 X 2.0 M30
M8 X 32 X 3.0 M30 X 56 X 4.0
M10 M33
M10 X 21 X 1.2 M33 X 60 X 5.0
M10 X 21 X 2.0 M36
M10 X 25 X 3.0 M36 X 66 X 5.0
M10 X 28 X 2.0
M10 X 30 X 2.0
M10 X 30 X 2.5
NB: for our range of Imperial Washers see page 40.
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Round/Flat Washers
NUTS
Imperial
Code: WFI..
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Size Size
(ID) OD Thickness 304 316 (ID)
OD Thickness 304 316
M2.5 4.8 0.6 M14 24.1 3.0
M3 6.2 0.8 M16 27.4 3.5
M4 7.6 0.9 M18 28.8 3.5
M5 9.2 1.2 M20 33.6 4.0
M6 11.8 1.6 M22 35.9 4.0
M8 14.8 2.0 M24 40.0 5.0
M10 18.1 2.2 M27 41.0 4.9
M12 21.1 2.5 M30 48.2 6.0
M36 57.0 6.0
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Spring Washers
Imperial
Code: WSI..
Size Size OD
(ID)
OD Width Thickness 304 316 (ID)
Width Thickness 304 316
3/16 0.334 0.062 0.047 5/8 1.079 0.203 0.156
1/4 0.489 0.109 0.062 3/4 1.271 0.234 0.188
5/16 0.586 0.125 0.078 7/8 1.464 0.266 0.219
3/8 0.683 0.141 0.094 1 1.661 0.297 0.25
7/16 0.779 0.156 0.109 1-1/4 2.045 0.359 0.312
1/2 0.873 0.171 0.125
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
Washers
Code: WTIM.. DIN6797J
Size Size
(ID)
OD Thickness 304 (ID)
OD Thickness 304
M2.5 5.5 0.4 M10 18.0 0.9
M3 6.0 0.4 M12 20.5 1.0
M4 8.0 0.5 M14 23.7 1.0
M5 10.0 0.6 M16 25.7 1.2
M6 11.0 0.7 M18 29.9 1.3
M8 15.0 0.8
Size Size
(ID)
OD 304 (ID)
OD 304
M5 9.50 M12 20.20
M6 10.90 M16 25.70
M8 14.70 M20 32.80
M10 17.70 M24 37.60
Belleville Washers
Code: WBM4..
MEASUREMENTS MAY VARY SLIGHTLY. IF THEY ARE CRITICAL, PLEASE CHECK THEM.
316 316
M3 M10
M4 M12
M5 M14
M6 M16
M8 M20
Push Nuts
Code: NTPM4..
304
M5
M6
M8
M10
M12
Cup Washers
Code: WCG4..
304
6G
8G
10G
12G
14G
NB: to fit self tapping screw size.
EPDM
14G X 25
EPDM Washers
Code: WNM..
M4 M8 M12
M4 X 9 X 1.6 M8 X 18 X 2.0 M12 X 22 X 1.9
M5 M8 X 24 X 2.5 M12 X 30 X 2.0
M5 X 11 X 1.6 M10 M16
M5 X 14 X 1.6 M10 X 20 X 1.7 M16 X 31 X 2.5
M5 X 19 X 2.4 M10 X 22 X 2.5 M20
M6 M20 X 38 X 1.6
M6 X 12 X 1.5
M6 X 16 X 1.5
S Series F Series
Soft compressible seal for general use, OD as Soft compressible seal which spreads compression
standard sizes. over a large area. Ideal for under fitting applications
providing OD is not too large.
SX Series
Soft compressible seal which features an extended MF Series
entry creating an insulated and sealed result. Suitable Soft compressible seal, features same as above but
for an under fitting application. Not suitable for use with a smaller OD.
with Self Tapping Screws or any fastening which is
PK Series
driven down from the top.
Hard semi rigid seal extended entry as SXR series.
SXR Series Recommended for use with Self Tapping Screws.
Hard semi rigid seal extended entry as SX series.
Recommended for use under fastening heads, pan or
countersunk.