Professional Documents
Culture Documents
Page 1 of 4
Details:
Manual: VERITAS NetBackup (tm) 6.0 Troubleshooting Guide for UNIX and Windows
Modification:
The following general guidelines can be used to determine if a restart of NetBackup is required
after making changes to the configuration on a NetBackup server or client.
The following are some common situations where it may be necessary to restart some or all of the
NetBackup 6.0 daemons:
- If an attribute like drive cleaning frequency is changed, then no daemons need to be restarted.
- If an attribute like drive type or robot number is changed, then ltid on all the media servers that
access the device need to be restarted.
- If the status column of vmoprcmd displays RESTART for a device path, then the media server
corresponding to the device path needs to be restarted. In addition, if the robot attributes are
changed, then ltid on the server acting as the robot control host may have to be restarted.
Deleting: No daemons need to be restarted.
- Other NetBackup processes that are called only when needed such as bpbrm, bptm, bpcd,
bpbkar, etc. will not need to be restarted when creating or changing the logging level. The
changes will take effect the next time the process is started. Note: This will not affect any
processes that were started before the change was made to the logging level.
Related Documents:
279295: VERITAS NetBackup (tm) 6.0 Troubleshooting Guide for UNIX and Windows
http://support.veritas.com/docs/279295
Products Applied:
NetBackup Enterprise Server 6.0
NetBackup Server 6.0
Languages:
English (US)
Operating Systems:
Solaris
9.0
E-Mail Support:
http://seer.entsupport.symantec.com/email_forms,
FTP: ftp://ftp.entsupport.symantec.com/ or
ftp://ftp.entsupport.symantec.com/
THE INFORMATION PROVIDED IN THE SYMANTEC SOFTWARE KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY
OF ANY KIND. SYMANTEC SOFTWARE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SYMANTEC
SOFTWARE OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES,EVEN IF SYMANTEC SOFTWARE OR ITS SUPPLIERS
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT
APPLY.